Valentines Bus Card

Valentines Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock.

2. Glue the smaller bus to the larger one. Fold the card base.

3. Glue the floral bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the three hearts; smallest on top:)

4. Glue the four solid circles ( two red and two white) to the inside of the open circles; centering them.

5. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the combined hearts to the center of the combined bus.

6. Use pieces of foam adhesive squares to attach the bottom silver bumper piece and side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. 

7. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it:)

Snowflake Gift Tag Ornament

Snowflake Gift Tag Ornament- JMRush 

Approximate size: H 3.75” X W 3.75”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.

2. Glue the snowflake to the Ornament base; centering it.

3. Flip the combined ornament over and glue the white gift tag piece on; centering it.

4. Finish with a ribbon:)

Snowflake Round Gift Tag Ornament

Snowflake Round Gift Tag Ornament- JMRush 

Approximate size: H 3.50” X W 3.25”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.

2. Attach the snowflake circle to the silver circle using pieces of square foam adhesive. Flip the ornament base over and glue the white gift tag piece on; centering it.

3. Flip the ornament base  back over and glue the combined snowflake on; centering it.

4. Finish with a ribbon:)

Dachshund Gift Tag Ornament

Dachshund Gift Tag Ornament- JMRush 

Approximate size: W 4.5” X H 3”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.

2.  Glue the dog silhouette without a mouth to the full dog silhouette (with hat) shape. Glue the smaller ear silhouette to the larger ear silhouette;centering it. Glue the sweater piece to the dog silhouette with a mouth. Glue the hat trim piece to the hat base piece. Attach the puff ball to the combined hat piece using a piece of foam adhesive.

3. Glue the collar piece to the combined sweater dog silhouette. Glue the combined ear to the combined sweater dog silhouette.

4. I used a small enamel dot to accentuate the eye on the combined full dog layer. Use foam adhesive squares to attach the combined sweater dog to the combined full dog silhouette. Glue the tip of the tail to the combined full dog silhouette. I used a small enamel dot to accentuate the nose.

5. Use a foam adhesive square to attach the combined hat to the combined dog. 

6. Flip the combined dog over and glue the white dog silhouette to the back ( When using as a gift tag:)

7. Loop a ribbon through the hanging circle and finish with a bow:)

3D Star Wreath Card

3D Star Wreath Card- JMRush 

Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold card base. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.) Curve the wreath branches as you like.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue to the front of the card base. Use foam adhesive squares to attach the star to the star ornament base. 

4. Finish with a ribbon:)

3D Star Ornament Gift Tag

3D Star Ornament Gift Tag- JMRush 

Approximate size: W 4” X H 4.25”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock. ( This file comes with an additional flat star to be used on the backside when used as a gift tag:)

2. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.)

3. Use foam adhesive squares to attach the star to the star ornament base.  Repeat for the other star on the backside when used as an ornament replace with the flat star when used as a gift tag:)

4.-5. Finish with a ribbon:)

Dachshund Christmas Card

Dachshund Christmas Card- JMRush 

Approximate size: H 4.25” X HW5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.

2.  Fold the card base. Glue the dog silhouette without a mouth to the full dog silhouette (with hat) shape. Glue the smaller ear silhouette to the larger ear silhouette;centering it. Glue the sweater piece to the dog silhouette with a mouth. Glue the hat trim piece to the hat base piece.

3. Glue the collar piece to the combined sweater dog silhouette. Glue the combined ear to the combined full dog silhouette.

4. Use foam adhesive squares to attach the combined sweater dog to the combined full dog silhouette. Glue the tip of the nose and tail to the combined full dog silhouette. Attach the puff ball to the combined hat piece using a piece of foam adhesive. 

5. Use a foam adhesive square to attach the combined hat to the combined dog. Glue the combined dog to the card front. I used small enamel dots to accentuate the collar, nose, and eye:)

Winter Barn Card

 Winter Barn Card-JMRush

Card size: W 5.5” X H 4.25”

This design has barn doors that open and is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock). ( Be careful releasing the barn pieces with cut outs from the mat:)

2. Fold the card at the score line. Glue the thinner barn door designs to their larger bases. Curve the wreaths as you like.

3.  Glue the two detailed barns with cut outs together centering them. Apply glue to the back center of each of the smaller wreaths and then secure to the larger wreaths; alternating the stem patterns.

4.  Glue the combined barn to the solid barn base. Fold the barn doors at the score lines.

5. Glue the combined combined barn door designs to their coordinating shapes on the combined barn base. There is a cut out line to align the upper hay door ( My pinky is pointing to it:)

6. Use pieces of foam adhesive squares to attach the roof to the combined barn.

7. Flip one of the combined wreaths over and glue the center rings of the two sets of wreaths together.

8. Use pieces of foam adhesive squares to attach the combined wreath to the combined barn.  I glued a ribbon to the wreath.

9. Apply glue to the backside of the barn (be careful not to apply glue to the barn doors).

10. Center and glue to the card base:)

Coffered Valentine’s Day Wreath Door Card

Coffered Valentine’s Day Wreath Door Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut design pieces.

2. Fold the card base at the score lines. Attach the door with larger openings to the door with smaller openings using pieces of foam adhesive squares. Glue the small circle knob to the larger one; centering it. Glue the door handle panel with a key hole to the solid door handle panel.

3. Use foam adhesive squares to attach the combined open rectangle doors to the solid rectangle door. Use foam adhesive squares to attach the four small rectangles inside each of the openings in the openings of the combined door. Glue the combined round door knobs to the largest round door knob base.

4. Use a piece foam adhesive to attach the combined door knob to the combined door handle panel. Glue the combined door knob/panel to the combined door. Curve your wreath circles as you like. Glue the inside rings of the two large wreath pieces together and the two smaller wreaths together making sure that the hearts alternate and that the hearts stay free from glue.

5. Attach the two combined wreath sections together; alternating leaves, using pieces of foam adhesive squares at the bases of the hearts on the largest combined wreath.  

6. Glue the combined door to the front of the card. 

7. Attach the combined wreath to the combined door with glue where it aligns with the center strip of the combined door and finish with a ribbon:)

Dinosaur Hug Gift Card Holder

Dinosaur Hug Gift Card Holder-JMRush

Approximate Card size: W 3.75” X H 5.75”

This design features character arms that open to a hidden gift card pocket, is compatible with both 8X12 and 12X12 mats, and fits most gift cards.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock)

2. Fold the card along score lines. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the white teeth with an oval cut out to the double Dino head base. Glue the single green Dino head to the coordinating white teeth Dino head.

5. Curve and glue the base of the tongue to the center of the oval inside the lower set of teeth.

6. Fold the double Dino head at the center score lines. Glue the combined Dino head to the top of the double Dino head base.

7. Use foam adhesive squares to attach the top back section of the combined Dino head to the front of the card base. Insert gift card and tuck the hands into the slots on the front. (I popped the Dino’s head to the front of the gift card section.)
8. I finished with enamel dots to accent the eyes and curved the arms slightly:)

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

Monarch Tri-panel Card

Monarch Tri-panel Card-JMRush

Approximate size: W 5.25 x H 4.25”

The Hummingbird Tri-panel Card features a front cover with a flower design which is bordered by a Monarch Butterfly panel on each side. The card opens to a blank back page (like a regular card). This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. (I used double sided card stock for the flower and the Butterfly)

2. Flip the card base over ( pretty side down). Fold the top score line.

3. Fold the two side panels over at the score lines. Glue the coordinating hummingbird panels on each side.

4. Glue one of the monarch cutout pieces to a monarch solid base. Repeat so that you have two.

5. Curve the flower petals, leaves, and monarch wings as you like.

6. Using pieces of foam adhesive squares, attach the flower petals together starting with the largest on the bottom to the smallest on top-alternating the petals.

7. Glue the combined flower to the center of the front of the card base. Use foam adhesive squares to attach the leaves under the combined flower.

8. Glue the monarch solid base to the coordinating shape on each panel. Glue the monarch cutout piece over it on each side.

9. Glue the bottom of the curved monarch just on the body and antenna to the flat monarch on each panel. (Be careful not to glue the wings down.)

10.-11. Finish with a enamel jewel in the center of the flower:) You an tuck the panels under the flower in the center if you like:) (Please ignore the glue bottle in the picture).

Hummingbird Tri-panel Card

Hummingbird Tri-panel Card-JMRush

Approximate size: W 5.25 x H 4.25”

The Hummingbird Tri-panel Card features a front cover with a flower design which is bordered by a hummingbird panel on each side. The card opens to a blank back page ( like a regular card ) and fits in a regular envelope. This design is compatible with both 8X12 and 12X12 mats. 

1.Cut design pieces.

2. Flip the card base over ( pretty side down). Fold the top score line.

3. Fold the two side panels over at the score lines. Glue the coordinating hummingbird panels on each side.

4. Curve the flower petals, leaves, and hummingbird wings as you like.

5. Glue the hummingbird with tail cutouts to the bird design without. (Do not glue the wings together). Use a foam adhesive square to attach the smallest flower to the second largest one- alternating the petals.

6. Glue the birds to the coordinating shapes on each side. I glued the back wing of the each bird to the panel.

7. Use foam adhesive squares to attach the combined flowers to the largest flower-alternating petals. Use foam adhesive squares to attach the leaves and combined flower to the center of the card base front.

8. Finish with a adhesive gem in the center of the flower:)

Weenie Dog Floppy Ears Card

Weenie Dog Floppy Ears Card-JMRush

Approximate Card size: H 4.5” X W 4.75”

This design is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces. ( I used double sided card stock for the dog)
2. Fold the score lines on the dog ears. Glue the round small medallion into place at the coordinating shape on the dog head solid base. Glue the collar piece on the solid head base and then the dog head with folded ears.
3. Glue the long piece with nose and mouth cut outs to the piece with cut out eyes, nose, and mouth. Glue the nose to the muzzle piece. 
4. Glue the combined piece with eye holes to the combined dog head with folded ears. Glue the small round eyes into place.
5. Use a foam adhesive square to attach the muzzle to the combined dog head with folded ears.
6. Glue the ears to the coordinating shape on the combined dog head piece with folder ears.
7. Fold the card base. Use foam adhesive squares to attach the combined dog to the front of the card base.
8. Use adhesive enamel dots to accent the dog’s eyes:)

Floppy Ears Labrador Retriever Card

Floppy Ears Labrador Retriever Card-JMRush

Approximate Card size: W 5.25” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

 

1. Cut design pieces. ( I used double sided card stock for the dog)
2. Fold the score lines on the card base and on the dog face with ears. Glue the dog face with ears to the dog face base.
3. Glue the tongue to the back of the muzzle ( I curved the tongue slightly for dimension.— Make sure to check the length that you have sticking out). Use a foam adhesive square to attach the nose to the muzzle. Glue the ears to the coordinating shape on the dog face combined piece. ( I used a slightly lighter color of card stock for the muzzle and ear pieces).
4. Use foam adhesive squares to attach the muzzle to the combined dog and the combined dog to the front of the card base.
5. Use adhesive enamel dots to accent the dog’s eyes and for studs on the dog’s collar:)

Wisteria Card

Wisteria Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces. ( I used double sided card stock for the flower).

2. Fold the card at the score lines. Glue the stem pieces to the Wisteria base. Using foam adhesive squares, attach the two large flower pieces together and the two smaller flower pieces together with the larger one on bottom of each set.

3. Curve the single flower petals and single leaves.

4. Glue the two flower groups together. Glue the leaves into place.

5. Glue the curved single flower petals to the top of the combined flower petal groups. I used foam adhesive squares to attach the central petal in this layer. Glue the Wisteria base to the front of the card base.

6. Use foam adhesive squares to attach the combined flower petal group to the Wisteria base. Finish with a ribbon and a enamel dot:)

Lilac Design Cut Card

Lilac Design Cut Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats and can be used horizontally or vertically.

1.Cut design pieces.

2. Fold the card base. Glue the large solid flower silhouette (green) to the front of the card.

3. Glue the cut out flower piece (dark purple) to it's matching base ( light purple).

4. Attach the combined cut out flower piece to the large solid flower silhouette on the front of the card using foam adhesive squares.

5. Finish with enamel dots to decorate the center of the flowers.

Lilac Card

Lilac Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. ( I used double sided card stock)

2. Fold the card base. Glue the large flower branch silhouette to the front of the card.

3. Glue the stem to the top of the card.

4. Glue the leaves to the top of the card.

5. - 7. Glue the flower petals to the front of the card. I started with the the 7 lightest colored petals then glued the shade darker (save a few of each color section to curve and glue later) Curve the darkest ( largest ) flower section so that the center is down and the tips of the petals are up. Curve the remaining few that you saved from each color section. 

8. Glue the bottom centers of the largest flower section and attach them to the card front. 

9. Glue the remaining curved flowers to the front of the card.

10. Finish by placing adhesive jewels in the center of several of the flowers:)

Boxer Dog Card

Boxer Dog Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. 
2. Fold the card base. Glue the smallest dog silhouette to the solid largest dog silhouette.
3. Glue the smaller face with a eye hole to the larger face with an eye hole (You only need to use the bottom face piece if you wish for your dog to have a white mark on his face:) Glue the neck marking and socks on the silhouette with a ear hole( if you wish to use them) and glue the collar on. Glue the socks on the combined silhouette ( if you wish to use them). Use foam adhesive squares to attach the last dog silhouette to the top of the combined dog silhouette. Glue the collar on. 
4. Use foam adhesive squares to attach the dog silhouette with a ear hole to the combined dog silhouettes. On the top dog silhouette- glue the tip of the nose down. Glue the combined silhouette to the card base.
5. Use a adhesive dot for the nose and jewels to decorate the collar.

Cherry Blossom Card

Cherry Blossom Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. (I used Vellum paper for the top layer of petals)
2. Fold the card base. Glue the branch designs to the front of the card. Curve the small stamens -insides of the flowers- (small petal design with a hole in the center:) so that the petals are higher than the center.   Color should be on the inside of each piece. Glue the bud pieces (pieces with three points) to the bud base (piece with three curves at the top). Attach small pieces of foam adhesive squares to the very center of the flower bases.
3. Glue the centers of the curved small stamen pieces to the center of the vellum flower petals.
4. Attach the combined flower pieces to the flower bases that you already prepped with foam adhesive squares. Center each one and off set the petals.
5. Glue the combined buds to the branches.
6. Use foam adhesive squares to attach three of the combined flowers to the branches. ( see finished photo they are the flowers with gems in the centers). Use glue to attach the rest of the combined flowers.
7. Finish by placing adhesive gems in the center of three of the flowers. ( I used a brown sharpie to color the pink gems to get the desired color:)