3D Star Wreath Card

3D Star Wreath Card- JMRush 

Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold card base. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.) Curve the wreath branches as you like.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue to the front of the card base. Use foam adhesive squares to attach the star to the star ornament base. 

4. Finish with a ribbon:)

Ice Skates Sled Ornament Gift Tag

Ice Skates Sled Ornament Gift Tag- JMRush 

Approximate size: W 2.75” X H 6”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used doubled sided card stock)

2.  Flip the ornament base over and glue the coordinating gift tag (white) to it. Glue the wood plank pieces to the coordinating shapes on the sled base. Glue the ice skates shoes and blades to the coordinating shapes on the ice skates solid bases. Curve the branches of the two wreath pieces.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue the thin small red piece to the center top of the combined sled.

4. Use a foam adhesive squares to attach the combined sled to the front of the ornament base; centering it. Use a foam adhesive squares to attach the combined wreaths to the front of the combined sled.

5. Using a large gauge thread or small width ribbon, tie two bows and cut a three inch piece. 

6.-7.Glue one thread bow to each ice skate and glue the ends of the 3” thread to the backside of each ice skate ( I used hot glue for this).

8. Loop the thread of the ice skates around the center branch of the combined wreath. Glue into place if you like.

9.-10.  Finish with a ribbon:)

Ice Skates Sled Card

Ice Skates Sled Card- JMRush 

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used doubled sided card stock)

2.  Fold the card base. Glue the wood plank pieces to the coordinating shapes on the sled base. Glue the ice skates shoes and blades to the coordinating shapes on the ice skates solid bases. Curve the branches of the two wreath pieces.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue the combined sled to the sled runners; align at the horizontal cross bars.

4. Use a foam adhesive squares to attach the combined sled to the front of the card; centering it. Using a large gauge thread or small width ribbon, tie two bows and cut a three inch piece. Glue the thin small red piece to the center top of the combined sled.

5. Use a foam adhesive squares to attach the combined wreaths to the front of the combined sled. Glue one thread bow to each ice skate and glue the ends of the 3” thread to the backside of each ice skate ( I used hot glue for this).

6. Loop the thread of the ice skates around the center branch of the combined wreath. Glue into place if you like.

7. Finish with a ribbon:)

3D Holiday Star Card

3D Holiday Star Card-JMRush

Card size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog:https://jmrushdesigns.blogspot.com/2017/07/3d-holiday-star-card.html

 You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock).

2. Fold the card at the score line. Curve the leaves bow wreath. I  curved one section down and the other up:) Crease the center line score line on the star; center crease will be up and stops at the center.

3. Apply glue to the circle and the stem ( not leaves) of one of the bow wreaths. Align the other bow wreath and secure. Crease the rest of the score lines of the star. (All of the score lines of the points of the star fold up.)

4. Image of the bow wreaths together and the star completely flooded.

5. Apply glue to the backside of the combined bow wreath and attach to the (center) front of the card base. Apply foam adhesive squares to the backside of the star on each of the points.

6. Flip the star back over and attach to the center of the circle section of the bow wreath.

7. Finish with a ribbon:)

Coffered Christmas Wreath Door Card

Coffered Christmas Wreath Door Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut design pieces.

2. Fold the card base at the score lines. Attach the door with larger openings to the door with smaller openings using pieces of foam adhesive squares. Glue the small circle knob to the larger one; centering it. Glue the door handle panel with a key hole to the solid door handle panel.

3. Use foam adhesive squares to attach the combined open rectangle doors to the solid rectangle door. Use foam adhesive squares to attach the four small rectangles inside each of the openings in the openings of the combined door; centering them.

4. Use a piece foam adhesive to attach the combined door knob to the combined door handle panel. Glue the combined door knob/panel to the combined door. Curve your wreath circles as you like. Glue the inside rings of the two large wreath pieces together and the two smaller wreaths together making sure that the leaves alternate and that the leaves stay free from glue.

5. Glue the two combined wreath sections together; alternating leaves. Attach the combined wreath to the combined door with glue where it aligns with the center strip of the combined door. 

6. Glue the combined door to the front of the card and finish with a ribbon:)

Winter Woodland Lantern (Flameless)

Winter Woodland Lantern (Flameless)-JMRush

Lantern size: W 3 x D 3 x H 7”

This Flameless Snowflake Lantern features cut outs and when vellum paper is used, a layered frosted glass effect is created. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. ( The trees are easier to remove from the mat if you work them off starting at the bottom.)

2. Glue the coordinating panels together-(Larger one goes on the back)

3. Apply glue to the edges of the backside of the combined panels.

4.Attach the vellum rectangles to the backside of the panels.

5.Flip the lantern base over (pretty side down) Glue the panels on the lantern base. 

6. You will need to flip the lantern over to check to make sure each panel is aligned and centered.

7.Fold all score lines.

8. Apply glue to the bottom of the long side tab on the very right side of the first lantern base section. Align the other lantern base section and secure the long side tab.

9. Apply glue to the bottom of the long side tab on the very right side of the combined lantern base section. Secure it to the inside of the other side creating a box.

10. Glue the circular hangers together. ( Make sure the stems of this piece remain separate) 

11. Apply glue to the outside of one of the stems.

12. Glue one of the stems to the inside of the top of the window panel that you want to be the front of your lantern.

13.Apply glue to the top tab next to the circular hanger you just placed. Begin to secure the top tabs to the inside of the next angled triangle.

14. Apply glue to the remaining circular hanger stem.  Continue to secure the top tabs. Attach the other Circular hanger stem to the inside of the opposite side of the lantern.

15.  Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides.

16. Repeat for the bottom tabs creating a shallow box.

17. Finish with a ribbon and place a flameless candle inside by lifting the lantern top off of the lantern base. I used a color changing flameless candle to create the color in the image above:)