Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Hip Hip Hooray!Card- JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats and contains a gift card/money pocket.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock any glitter card stock)

2. Flip the card base over as shown. Glue the white square to the center panel and secure until dry.

3. Apply glue to the top panel around the words. Secure the glitter square pretty side down and secure until dry.

4. Fold score lines. Fold side tabs in toward the center. Apply glue to the side tabs on either side of the bottom panel. Fold the bottom panel toward toward the center panel and secure until dry. This will create a pocket.

5. Insert gift card or money.

6. Your card is complete:)

 

Winter Gnome Hug Gift Card Holder

Winter Gnome Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.5” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock)

2. Fold the card along score lines. Glue the black belt into place right above the first line of horizontal score lines and center it.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold square belt buckle to the center of the belt.

4.Glue the coordinating hat to the hat shape on the white head/beard piece.

5.  Insert gift card. Glue the combined head piece to the card base; aligning the beard along the edges of the top the card base.

6. Glue the hat trim piece to the combined face. Curl the green holly leaves as you like. 

7. Using foam adhesive squares attach the mustache to the combined beard/Head piece. 

8. Using a piece of foam adhesive square, attach the nose to the mustache. Glue the little red holly to the coordinating shape on the holly leaves.

9.Flip the card over. Glue the other red hat to the coordinating shape. Glue the hands into place.

10. Glue the white trim pieces just above the hands on each side. 

11. I finished with enamel jewels to accentuate the holly and a ribbon:)

( I used markers to color the enamel jewels the color I wanted:)

12.  Use a piece of foam adhesive square to attach the combined holly to the hat. 

 

Bulldog Pup Hug Gift Card Holder

Bulldog Pup Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided cardstock for the card base) There is a small tail not shown in this tutorial that can be attached to the backside of the gift card if desired:)

2. Fold the card along score lines. Glue the face piece with holes to the coordinating solid face shape (black). Glue the small chin (gray) to the coordinating shape on the solid combined face shape. Glue the small black circle eyes to the slightly larger brown circle eyes; aligning the holes.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Attach the muzzle and ear pieces to the combined solid face with foam adhesive squares. Glue the combined eyes to the larger white solid eyes.

5. Glue the combined eyes into place and attach the nose with a piece of foam adhesive square.

6. Glue the small eyebrow lines to the combined face.

7. Using foam adhesive squares attach the combined face to the gift card holder base.

8. The gift card can be inserted into the pocket of the card base and the hands tuck into the slots on the front. Finish with ribbon:) 

Yellow Cat Handle Basket

Yellow Cat Handle Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 3.75” X H 5.5” including handle

This cute basket design is a perfect container for treats for your favorite feline or a small gift for your veterinarian. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1. Cut design pieces. ( I used double sided card stock) 
2. Glue the fury bottom piece to the coordinating shape on the lower section of the basket base. Glue the other fury chest piece to the coordinating shape on the upper section of the basket base. Glue the cat head shape with cut outs to the solid black cat head shape. Glue the smaller solid paws and feet to the larger solid feet and paws.
3. Glue the small rounded muzzle pieces to the muzzle base ( that has a coordinating shape plus a long vertical line). Glue the small triangular face markings to either side of the combined cat head. Glue the inner ear pieces to the combined cat head. Glue the collar and collar tag to the combined cat head. Glue the feet pieces that  have cutouts to the combined feet.
4. Glue the combined muzzle piece to the combined cat head. Use a small piece of foam adhesive square to attach the nose.
5. Use foam adhesive squares to attach the combined head to the coordinating shape on the basket base. use foam adhesive squares to attach the front paws to the basket.
6. Flip the combined basket over. Fold the basket base at the score lines. Apply glue to the top two tabs on the basket base and secure to the rounded shape above.
7. Apply glue to the bottom two tabs on the basket base and secure to the head shape above creating a box.
8. Use foam adhesive squares to attach the feet and the tail to the back of the basket.
9. Insert the handle on either side of the basket.
10. I used enamel dots to accentuate the eyes and added a ribbon.
11. Use three small lengths of thread and apply hot glue to one of the groups of ends. Attach underneath the nose. Repeat for the other side:)

Tulip Garden Lantern

Tulip Garden Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7.25” (H 8.25” with Circular Hanger)

This Flameless lantern features a layered transparent frosted effect that is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Glue the full flower petal shapes (12) to the flower bases (12).

3. Using pieces of foam adhesive squares, attach the single flower petals to the center of each of the combined flower pieces. Use a foam adhesive square to attach the smaller sun silhouette to the larger one.

4. Use a foam adhesive square to attach the circular sun shape to the combined sun.

5. Flip the lantern bodies over as shown. Fold the vertical score line in between the two lantern bodies. Center the two lantern body pieces. Apply glue to the backside of the right side tab on the left lantern body piece. Attach to the other lantern piece making sure that the bottoms align (joining the two body pieces). Allow to dry.

6. Glue the solid vellum pieces (4) to the opening in each of the lanterns bodies centering them. Allow to dry.

7. Glue the circular hanger piece to the top of each of the lantern bodies on the peak of the side that has the long side tab. 

8. Fold the score lines on the lantern bodies and the square lantern base.

9. Apply glue to the last long side tab. Secure the long tab to the other side of the lantern body creating a square box shape.

10. Image of the Lantern body glued together.

11.  Apply glue to one of the top tabs and secure it to the triangular panel to it’s left side.

12. Repeat for the remaining tabs creating a fully enclosed top. (I sometimes use a long object (pencil eraser end) to help secure the tabs on the inside of the lantern top base.)

13. Apply glue to the inside of one of the circular hangers and secure to the other.

14. Glue the grass shapes to each side of the lantern bad; centering and aligning at the bottom.

15. Place a foam adhesive square on the backside petal section of each of the combined tulip shapes and a dab of glue at the bottom (leaf section). Place three combined tulips to each side.

16. Use a foam adhesive square to attach the combined sun to the top of the lantern body.

17. -18. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides. Repeat for the bottom two tabs creating a shallow box.

19. Place a flameless candle inside and the lantern top in it’s base. I used a W 2.75” x H 4” pillar flameless candle:).

Water Lily Lantern (Flameless)

Water Lily Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7” (H 7.75” with Circular Hanger)

This Flameless lantern features a layered transparent frosted effect that is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2.Center and glue the rectangular lily silhouettes (4) to the coordinating rectangle solid lily shapes (4); centering them. Flip the lantern bodies over and glue the solid vellum pieces (4) to the opening in each of the lanterns bodies. Allow to dry.

3. Fold the score lines on the lantern bodies and the square lantern base. Curve the flower petals as you like. 

4. Glue the circular hanger piece to the top of each of the lantern bodies on the peak of the side that has the long side tab.

5. Center the two lantern body pieces. Apply glue to the backside of the right side tab on the left lantern body piece. Attach to the other lantern piece making sure that the bottoms align (joining the two body pieces). Allow to dry.

6. Image of the two lantern bodies glued together.

7. Flip the combined lantern body over ( pretty side up) and glue the combined lily mats to each of the openings on the lantern body; centering them. Allow to dry.

8. Flip the combined lantern body over and apply glue to the last long side tab. Secure the long tab to the other side of the lantern body creating a square box shape.

9. Image of the Lantern body glued together.

10.  Apply glue to one of the top tabs and secure it to the triangular panel to it’s left side.

11. Image of the tab secured to the panel. Repeat for the next tab.

12. Apply glue to the last two tabs and the circular hanger and secure to the inside of the lantern, creating a fully enclosed top. 

(I sometimes use a long object (pencil eraser end) to help secure the tabs on the inside of the lantern top base.)

13. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides. Repeat for the bottom two tabs creating a shallow box.

14. Glue the two largest flower petals and two smallest flower petals together; centering them and alternating the petals.

15. Glue the last flower petal to the large petal set;centering and alternating the petals.

16. I used a adhesive jewel for the inside of the flower and attached it to the top of the lantern with a foam adhesive square.

17. Place a flameless candle inside and the lantern top in it’s base. I used a W 2.75” x H 4” color changing pillar flameless candle:).

Robot Double Sticky Note Holder

Robot Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock. ( I substituted colors on the small antenna circle from grey to silver. Grey is shown in this tutorial and silver on the finished product image)

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Top view.

4.- 5. This is what the backside will look like:) Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side. Glue the silver head piece with cutouts to the coordinating solid head shape. Glue the two smaller square foot pieces to their coordinating larger square foot pieces; centering them. Glue the two hand pieces to the coordinating shapes on the robot base; centering them.

6. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using pieces of foam adhesive squares, attach the combined feet, the combined head, and the small antenna circle to the coordinating shapes on the robot base. Using a foam adhesive square, attach the heart to the center of the combined robot.

7. Attach the combined robot to the front of the sticky note holder with foam adhesive squares; centering it. 

8. Insert the back of a sticky note stack inside the slot provided. Insert the second sticky note stack into the backside pocket.

9. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Labrador Double Sticky Note Holder

Labrador Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

4. This is what the backside will look like:)

5. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

6. Insert the second sticky note stack into the backside pocket.

7. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using foam adhesive squares, attach the lab head piece with eye holes to the solid dog base.

8. Curve the small dog tongue as you like. Using foam adhesive squares, attach the black nose to the muzzle piece and the ears to the coordinating shapes on the combined dog. Glue the tongue by sliding it underneath the open section of the combined dog. 

9.Use a piece of foam adhesive square to attach the nose to the combined muzzle. I glued the top tips of the ears down to the combined dog base and used adhesive jewels to accent the eyes.

10. Insert a pen and finish with a ribbon:)

Schnauzer Double Sticky Note Holder

Schnauzer Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown (pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Fold the bottom score line back. Fold the side tab score lines toward the back.

4. I flipped the base over on this image so that you can see the folds on the bottom section. Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

5. This is what the backside will look like:)

6. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

7. Insert the second sticky note stack into the backside pocket.

8. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Glue the red collar piece to the solid dog base.

9. Glue the small round dog tag to the combined dog base at it’s coordinating spot;centering it. Glue the dog face with eye cutouts to the combined dog base;centering it.

10. Curve the small dog tongue as you like. Using foam adhesive squares, attach the small white muzzle to the larger gray muzzle;centering it. Glue the tongue under the white muzzle by sliding it underneath. Use a piece of foam adhesive square to attach the nose to the combined muzzle.

11. Use pieces of foam adhesive squares to attach the combined muzzle to the combined dog base and the ears to their coordinating shapes on the combined dog base. Glue the eyebrow to the combined dog; aligning the edges with the coordinating shapes on the combined dog base. 

12. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)