Chick Peek Pocket Card

 Chick Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
4. Image of pocket section.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the chick shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes to the circular chick head shape and attach the beak with a foam adhesive square.
8. Using foam adhesive squares or a wobble mechanism to attach the combined chick head shape to the coordinating shape on the front of the card:)

Stitched Bird Card

Stitched Bird Card-JMRush

Card size: H 4.25" X W 5.5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces.
2. Fold the card at the score lines. Glue the smaller bird wing to the larger one; centering it. Curve the flowers and leaves as you like.
3. Using foam adhesive squares, attach the smaller bird silhouette to the larger solid bird base; centering it. Glue the beak and feet to the bird base.  Apply glue to the backside of each flower ( just to the inside flower shape) and attach to it’s coordinating shape. ( You may want to make sure you have aligned each flower with it’s base so they are aligned properly. The outside petals should remain free).
4. Use a foam adhesive square on the backside of the combined wing piece at the separated side and glue at the rounded side. Attach to the combined bird base; aligning at the separated wing end.
5. Glue the tree branch to the card base.
6. Glue the combined bird to the card base.
7. Attach the combined flowers using foam adhesive squares. Glue the leaves underneath the combined flowers. I finished by adding adhesive dots to accentuate the bird’s eye and the center of the flowers:)

Rose Pocket Gift Car

Rose Pocket Gift Card-JMRush

Approximate Size: W 7.25” X H 3.75”

This design has a sliding compartment that is sized to hold American paper currency or most gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the score lines on the two card bases.  (There is a enlarged photo below to assist in folding the card bases. Green lines fold down. Red folds up. The lower card base if turned so that the point is pointing up instead of down.) Glue the detailed flower to it’s coordinating shape solid base. Curve the leaves as you like.
3. Apply glue to the side tabs on the lower card base and fold the top section to them.
4. Apply glue to the side tabs on the upper card base and secure to the upper rectangular panel.
5. Apply glue to the lower section on either side ( where my fingers are pointing) and attach to the lower section. 
6. Apply glue to the top section of the upper card base and secure the triangular piece to it; aligning at the top of the card. Glue the center point of the leaves together.
7. Use a foam adhesive square to attach the combined leaves to the center of the top combined card base.
8. Insert cash or a gift card. Attach the combined flower with a foam adhesive square. Insert the top card base into the lower card base:)

Mom Tulips Card

Mom Tulips Card-JMRush

Approximate Size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (There are actually four “mom” script words in this file. You will only need three. The thinnest script is very delicate so I included one that is a bit thicker for the top layer:) - ( I also changed the color of the thinnest script to a darker blue paper so it shows up better)
2. Fold the card base. Glue the larger flower petal pieces to the coordinating shapes on the flower grouping pieces (2).  Glue the two largest “mom” scripts together.
3. Use pieces of foam adhesive squares to attach the middle single petals to the combined flower groupings. Glue the last “mom” script to the combined script.
4. Curve the leaves of the flower groupings as you like. Use a foam adhesive squares to attach the two flower grouping together.  Glue the front panel to the front of the card base. 
5. Place the combined flower grouping and the script to the front of the card to find placement.
6. I used foam adhesive squares on the top back section of the combined flower grouping and glue at the bottom. Attach to the front of the card base.
7. Glue the script to the front of the card base. I pressed on the bottom section of the script until it fully dried:)

Unicorn Hug Gift Card Holder

Unicorn Hug Gift Card Holder - JMRush

Approximate Size: W 4.25” x H 6.5”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Easter, Valentine’s Day, or for any occasion. This design is compatible with both 8X12 and 12X12 mats and fits most gift cards.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the Card Base at the score lines. Glue the Unicorn head with ear, eye, and nose cut outs to it’s coordinating solid base. Glue the unicorn horn with cut outs to it’s coordinating solid base. Glue the eyes with eyelashes to the circles with small circle cut outs; aligning at the small circle. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Curl the eyelashes on the combined eyes as you like:) Glue the combined eyes to the coordinating shapes on the combined Unicorn head; aligning the small circles.

5. Curl the hair and tail pieces as you like. Glue the small hair piece to the combined unicorn head. 

6. Use a foam adhesive square to attach the combined unicorn horn to the combined unicorn head; aligning at the top of the horn. Use foam adhesive squares to attach the combined Unicorn head to the coordinating shape on the card base.

7. Glue the hooves to the hoover shapes on the card base. Use foam adhesive squares to attach the large hair piece to the back of the card base.

8. Insert gift card.

9. Fold the gift card section upward and tuck the hooves into the slots on the front of the gift card section (card base).

10. Attach the tail to the back of the card base with a foam adhesive square.

11. Finish with a ribbon:)

Hippo Card

Hippo Card-JMRush

Approximate Size: W 4.25” X H 4.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.
2. Glue the full Hippo Head silhouette with an eye/ear/nose holes to the larger solid coordinating Hippo Head silhouette. Fold the card base at the score lines. ( I have the card base upside down in this tutorial - the teeth should be on the top of the card)
3. Use a foam adhesive squares to attach the oval nose/muzzle piece to the combined Hippo Head.
4. Use a foam adhesive squares to attach the combined Hippo Head to the front of the card base (with teeth). Glue the ears of the combined Hippo Head to the card base. I finished with adhesive enamel dots to accentuate the eyes and a ribbon:)

Wisteria Gift Tag Card

Wisteria Gift Tag Card-JMRush

Approximate Card Size: H 4.75” x W 2.75”

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold the card at the score lines. Glue the large wisteria flower/leaf piece to the front of the gift tag.

3. Glue the stem/leaf piece to the coordination shape on the combined gift tag; centering it. Curve the single flower petals and single leaves.

4. Using foam adhesive squares, attach the largest flower shape to the coordinating shape on the combined gift tag. Glue the leaves into place.

5. Glue the two remaining large flower pieces together ( smaller of the two on top) Glue the center of the two upper curved single flower petals to the top of the last remaining flower section. 

6. Repeat for the two side petals; overlapping slightly.  Attach the combined large flower section to the front of the tag base using foam adhesive squares. 

7. I used foam adhesive squares to attach the final petal to the center of the top layer.

8. Use foam adhesive squares to attach the last combined flower layer to the top of the tag. Finish with a ribbon and a enamel dot:)

Tulip Gift Tag Card

Tulip Gift Tag Card-JMRush

Approximate Card Size: H 3” x W 2.75”

This design can be used as an alternative to a bow on a present or gift bag and is compatible with both 8X12 and 12X12 mats. 

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock) 

2. Fold the card base at the score lines. Curve the flower petals and leaf design.

3. Glue the Longest side of the long double petal to the center front of the largest petal grouping.  Fold the gift tag base at the score lines.

4. Glue the Last petal grouping to the center top of the bottom petal of the combined flower petals. Open your card and glue the scalloped piece on the bottom section of the card; centering it. ( Optional piece for writing in case you have a double sided colored card base:)

5. I used foam adhesive squares to attach the lower section of the flower petals to the upper section.

6. Center and glue the leaves to the front of the gift tag base.

7. Use foam adhesive squares to attach the combined tulip to the front of the gift tag base. I looped a ribbon through the top opening of the card to finish:)

Rose Gift Tag Card

 Rose Gift Tag Card-JMRush

Approximate Size with Rose: W 4” x H 3.25”

Approximate Card Size: W 2.5” x H 2.75”

This design can be used as an alternative to a bow on a present or a gift bag and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the flower pieces) - ( I switched the color of the card base from a pattern to a solid white during this tutorial. The pattern was too busy for this project for me:)

2. Fold the card base at the score lines. Curve the flower petals and leaf design. I curved the two larger pieces downward toward the table and the two smaller I curved each individual petal inward toward each petals vertical center forming a circular shape.

3. Glue the two smaller petal sections together and the two larger petal sections together alternating the petals. 

4. I used a foam adhesive square to attach the two flower sections together and dabbed glue along the bottom of the center flower section to attach and curve the shape the bottom section to the top. ( This is where I decided to use a white card base:)

5. Glue the leaf piece in the center of the top of the card base.

6. I used a foam adhesive square to attach the combined flower to the center of the combined card base.

7. ( Optional piece for writing in case you have a double sided colored card base:)-Open your card and glue the scalloped piece on the bottom section of the card; centering it.

8. I looped a ribbon through the top opening of the card to finish:)

Frog Hearts Card

Frog Hearts Card-JMRush

Approximate Size: H 5.5” x W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the card base at the score lines. Glue the Solid frog silhouette to the back of the frog silhouette with a mouth cut out. Glue the solid eye piece to the backside of the eyes with pupil cutouts.

3. Use foam adhesive squares to attach the combined eyes to the combined frog silhouette. Use a foam adhesive square to attach the second largest heart to the largest heart; centering it. 

4. Use foam adhesive squares to attach the combined Frog to the front of the card. Use pieces of foam adhesive square to attach the combined heart to the center above the frog and the single layer hearts on either side:)

You Are Loved Card

You Are Loved Card-JMRush

Approximate Size: W 5.5” x H 3.25”

This design has cut out words and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock and vellum paper)

2. Fold the card base at the score lines. Glue the vellum solid hearts to the backside of the cut out hearts.

3. Use foam adhesive squares to attach the combined hearts to the coordinating shape on the front of the card base:)

I Love Your Smile Card

 I Love Your Smile Card-JMRush

Approximate Size: W 5.5” x H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Apply glue to the top side of the card base. Flip the solid shape over and attach to the coordinating shape on the card base.

3. Like so:)

4. Fold the combined card base at the score lines.

5. Glue the Smile cut out piece to the front of the card. Glue the word Smile to the bottom right hand corner of the card base.

6. Complete glueing the words to the card base:)

Monster Pocket Card 2

Monster Pocket Card 2-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Glue the teeth and two front panels into place. Glue the eyes to the solid eye base.
3. Flip the card base over. Fold the score lines on the card base. Apply glue to the back of the side tabs. Secure to the upper rectangular panel forming a pocket.
4. Insert note or gift card.
5. Attach the eyes with pieces of foam adhesive squares. I used different sized small enamel dots to accentuate the eyes:)

Monster Pocket Card 1

Monster Pocket Card 1-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Glue the teeth and two front panels into place. Glue the eyes to the solid eye base.
3. Flip the card base over. Fold the score lines on the card base. Apply glue to the back of the side tabs. Secure to the upper rectangular panel forming a pocket.
4. Insert note or gift card.
5. Attach the eyes with  pieces of foam adhesive squares. I used different sized small enamel dots to accentuate the eyes:)

With Sympathy Design Card

With Sympathy Design Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the card base. Glue the rectangular piece with cut outs to the rectangular piece with scalloped edges.
3. Glue the combined rectangular pieces to the front of the card base. Glue the smaller words to the word bases. Using a piece of foam adhesive square, attach the largest flower to the solid base at the center point. Repeat for the second largest grouping of flower shapes. Glue the smallest two flowers at the center.
4. Glue the combined words to the front of the card base. Glue the largest two combined flower grouping together at the center point. Glue this section to the front of the card. 
5. Glue the smallest flower section to the top of the combined flower section on the card base. I used a enamel dot for the center of the flower.
6. I used small enamel dots to accentuate the center of each of the cut out flowers:)

2 Panel Tree Card

2 Panel Tree Card / Invitation- JMRush

Approximate size: W 4.25” X H 5.5”

This two panel card opens in the middle, comes with a insert card, and fits a A2 envelope. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Working on my daughter's wedding invitations! I am loving this beautiful paper from CutCardStock.com. I am using the Stardream Metallic in Lapiz Lazuli, Classic Linen Natural for the insert and envelopes, and CTI Glama Natural Translucent vellum.
You can find this beautiful great quality paper here:http://www.cutcardstock.com

Fox Hug Gift Card Holder

Fox Hug Gift Card Holder-JMRush

Approximate Card size: W 4” X H 5.75”

This design features character arms that open to a hidden gift card pocket, is compatible with both 8X12 and 12X12 mats, and fits most gift cards.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock)

2. Fold the card along score lines. Glue the fox head with cut outs to the solid fox head piece.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the fox face to the font of the combined fox head and glue the inner ear shapes to the coordinating shapes.  

5.Glue the nose on the tip of the combined fox head and the circular cheek shapes to the ends of the smile.

6.Use foam adhesive squares to attach the combined fox head to the front of the card base. Insert gift card.

7. Tuck the hands into the slots on the front. Glue a ribbon to the heart shape.

8. Secure the tail to the backside of the card with glue.
9. I finished with enamel dots to accent the eyes:)