Thursday, August 31, 2017

Crawling Baby Boy Bottom Card


Crawling Baby Boy Bottom Card- JMRush 
Approximate Card size: W 5.50” X H 4.25”

This cute baby bottom card can be used for baby shower invites, pregnancy/birth announcements, or for welcoming a new baby. This design is compatible with both 8X12 and 12X12 mats. 


You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com


1. Cut design pieces. ( I used double sided card stock) 
2. Fold the card base at the score lines. Glue the smaller feet to the larger feet bases; aligning on the top (heel) and big toe side of each foot. Glue the largest diaper piece to the coordinating shape of the full bottom piece; centering it ( make sure the little bumps on the outside edge of the diaper piece is on the lower half)
3. Glue the combined bottom piece to the front of the card base; aligning at the bottom.
4. Apply a foam adhesive square to the back heel section of each of the combined feet. Apply glue to the toe section of the backside of each of the combined feet. Attach each foot to the combined card base; aligning with the toe shapes of the card base.
5. Finish with a  ribbon:)


Crawling Baby Girl Bottom Card

Crawling Baby Girl Bottom Card- JMRush 
Approximate Card size: W 5.50” X H 4.25”

This cute ruffled baby bottom card can be used for baby shower invites, pregnancy/birth announcements, or for welcoming a new baby. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com




1. Cut design pieces. ( I used double sided card stock) 
2. Fold the card base at the score lines. Glue the smaller feet to the larger feet bases; aligning on the top (heel) and big toe side of each foot. Glue the largest diaper piece to the coordinating shape of the full bottom piece; centering it ( make sure the little bump on the outside edges of the diaper piece is on the lower half) Fold the diaper ruffle pieces (3) at the score lines (first score line should be up, next one down etc…
3. Apply glue from the top to the middle of the elongated ovals on either end of the middle sized ruffle piece. Line up the largest ruffle piece just above the middle ruffle so there is one elongated oval hanging over the edge on either side. Attach the largest ruffle over the glue you just applied on the middle ruffle and secure.
4. Repeat for the the smallest ruffle -attaching the combined ruffle piece on top and creating a staggered pattern.
5. This is what it should look like.
6. Apply glue to the outside half of the top elongated oval.
7. Attach to the combined bottom piece at the top as shown, making sure the half elongated oval is within the diaper portion of the combined bottom piece. Allow glue to dry and then repeat for the other side.
8. Larger image of the angle of the attached half elongated oval of the combined ruffle piece. The tip is at the corner where the diaper and bottom piece meet.
9. This is what it should look like:)
10. Apply glue to the backside of the last diaper piece (scalloped bottom). Place it over the combined bottom/ruffle piece and align it at the top and center it. Make sure the sides align with the corner tip where the diaper and the ruffle piece meet. I applied pressure to the top edge until dry.
11. Glue the combined bottom piece to the front of the card base; aligning at the bottom.
12. Apply a foam adhesive square to the back heel section of each of the combined feet. Apply glue to the toe section of the backside of each of the combined feet. Attach each foot to the combined card base; aligning with the toe shapes of the card base.
13. Finish with a  ribbon:)

Digiplayground.com Store Closing


You can now purchase my Silhouette files in SVG format at the @silhouette.inc store! Just click the "Purchase SVG Bundle" before adding to cart!

Silhouette Sale!



50% off ALL designs in the Silhouette store now through August 31st!
https://www.silhouettedesignstore.com/artists/485222

You can now purchase my Silhouette files in SVG format at the @silhouette.inc store! Just click the "Purchase SVG Bundle" before adding to cart!

Tuesday, August 22, 2017

Happy Birthday Flower Gift Card Pocket

Happy Birthday Flower Gift Card Pocket- JMRush 
Approximate Card size: W 5.50” X H 4.25”

This design has an inside pocket that fits most gift cards is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222


1. Cut design pieces. (I used double sided card stock on the flower petals)
2. Fold the card base at the score lines. Glue the smaller text to the to the larger one;centering it. Curve the flower petals as you like.
3. Apply glue to the two small tabs on the card base and secure to the panel above.
4. Glue the centers of the two smaller flowers together; alternating petals and with the smallest flower on top. Glue the centers of the two larger flowers together; alternating petals and with the smallest flower on top.
5.  Insert gift card. Glue the centers of the two flower grouping together; alternating petals and with the smaller grouping on top.
6. Attach with the words to the front of the card base with small pieces of foam adhesive squares. Glue the flower into place and finish with a small adhesive jewel in the center of the flower:)

Friday, August 18, 2017

Crawling Baby Boy Pacifier Basket



Crawling Baby Boy Pacifier Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5” including handle

This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com




Crawling Baby Boy Curly Hair Pacifier Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5” including handle


This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222




1. Cut design pieces. ( I used double sided card stock) (Some design pieces will differ from this tutorial as it is used for the multiple design files).
2. Fold the box base at the score lines. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the smaller pacifier base to the larger one ; centering it.  Glue the smaller pacifier ring to the larger one; centering it.
3. Glue the larger diaper to the coordinating shape on the box base. Glue the combined skin colored faces to the combined black/white face.
4. Glue the oval shape to the combined pacifier base (widest section horizontal). Apply glue to the top two tabs on the box base and secure to the shape above. Glue the eye, eyebrows, and hair into place on the combined face.
5. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box. Use a small piece of foam adhesive square to attach the small pacifier oval to the combined pacifier ring(widest section horizontal).
6. Attach the combined pacifier ring to the combined pacifier base with a small pieces of foam adhesive square. Glue the smaller diaper piece to the back outside of the box base; aligning at the top center.
7. Insert the handle into the side slots on the box.  Repeat for the other side. Use a foam adhesive square to attach the combined pacifier to the combined face. 
8. Use a foam adhesive square to attach the combined feet to the back of the box base.

9.-10. Use a foam adhesive square to attach the combined hands and face to the front of the box base. Finish with ribbons:)

Crawling Baby Girl Headband Pacifier Basket


Crawling Baby Girl Headband Pacifier Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5” including handle

This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com






1. Cut design pieces. ( I used double sided card stock) (Some design pieces will differ from this tutorial as it is used for the multiple design files).
2. Fold the box base at the score lines. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the smaller pacifier base to the larger one ; centering it.  Glue the smaller pacifier ring to the larger one; centering it.
3. Glue the larger diaper to the coordinating shape on the box base. Glue the combined skin colored faces to the combined black/white face. Glue the oval shape to the combined pacifier base (widest section horizontal).
4. Apply glue to the top two tabs on the box base and secure to the shape above.
5. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box.
6. Glue the eye, eyebrows, and hair into place on the combined face. 
7. Attach the combined pacifier ring to the combined pacifier base with a small pieces of foam adhesive square. Curl the eyelashes as you like.  Glue the smaller diaper piece to the back outside of the box base; aligning at the top center. Use a foam adhesive square to attach the small pacifier oval to the combined pacifier (widest section horizontal).
8. Use a foam adhesive square to attach the combined feet to the back of the box base. Use tiny bit of glue to attach the eyelashes to the combined face.
9. Use a foam adhesive square to attach the combined pacifier to the combined face. Insert the handle into the side slots on the box.  Repeat for the other side.
10. Use a foam adhesive square to attach the combined hands and face to the front of the box base. Finish with ribbons:)

Crawling Baby Boy Cowlick Pacifier Basket




Crawling Baby Boy Cowlick Pacifier Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5” including handle


This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222



1. Cut design pieces. ( I used double sided card stock) (Some design pieces will differ from this tutorial as it is used for the multiple design files).
2. Fold the box base at the score lines. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the smaller pacifier base to the larger one ; centering it.  Glue the smaller pacifier ring to the larger one; centering it.
3. Glue the larger diaper to the coordinating shape on the box base. Glue the combined skin colored faces to the combined black/white face.
4. Glue the oval shape to the combined pacifier base (widest section horizontal). Apply glue to the top two tabs on the box base and secure to the shape above. Glue the eye, eyebrows, and hair into place on the combined face.
5. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box. Use a small piece of foam adhesive square to attach the small pacifier oval to the combined pacifier ring(widest section horizontal).
6. Attach the combined pacifier ring to the combined pacifier base with a small pieces of foam adhesive square. Glue the smaller diaper piece to the back outside of the box base; aligning at the top center.
7. Insert the handle into the side slots on the box.  Repeat for the other side. Use a foam adhesive square to attach the combined pacifier to the combined face. 
8. Use a foam adhesive square to attach the combined feet to the back of the box base.
9.-10. Use a foam adhesive square to attach the combined hands and face to the front of the box base. Finish with ribbons:)

Crawling Baby Girl Pigtails Pacifier Basket




Crawling Baby Girl Pigtails Pacifier Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5” including handle


This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222



You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com




1. Cut design pieces. ( I used double sided card stock) 
2. Fold the box base at the score lines. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the smaller pacifier base to the larger one; centering it.  Glue the smaller pacifier ring to the larger one; centering it.
3. Glue the larger diaper to the coordinating shape on the box base. Glue the combined skin colored faces to the combined black/white face. Glue the oval shape to the combined pacifier base (widest section horizontal).
4. Apply glue to the top two tabs on the box base and secure to the shape above.
5. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box.
6. Glue the eye, eyebrows, and hair into place on the combined face. 
7. Attach the combined pacifier ring to the combined pacifier base with a small pieces of foam adhesive square. Curl the eyelashes as you like.  Glue the smaller diaper piece to the back outside of the box base; aligning at the top center. Use a foam adhesive square to attach the small pacifier oval to the combined pacifier (widest section horizontal).
8. Use a foam adhesive square to attach the combined feet to the back of the box base. Use tiny bit of glue to attach the eyelashes to the combined face.
9. Use a foam adhesive square to attach the combined pacifier to the combined face. Insert the handle into the side slots on the box.  Repeat for the other side.
10. Use a foam adhesive square to attach the combined hands and face to the front of the box base. Finish with ribbons:)


Crawling Baby Girl Ponytail Pacifier Basket


Crawling Baby Girl Ponytail Pacifier Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5” including handle

This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.


You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com



1. Cut design pieces. ( I used double sided card stock) (Some design pieces will differ from this tutorial as it is used for the multiple design files).
2. Fold the box base at the score lines. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the smaller pacifier base to the larger one ; centering it.  Glue the smaller pacifier ring to the larger one; centering it.
3. Glue the larger diaper to the coordinating shape on the box base. Glue the combined skin colored faces to the combined black/white face. Glue the oval shape to the combined pacifier base (widest section horizontal).
4. Apply glue to the top two tabs on the box base and secure to the shape above.
5. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box.
6. Glue the eye, eyebrows, and hair into place on the combined face. 
7. Attach the combined pacifier ring to the combined pacifier base with a small pieces of foam adhesive square. Curl the eyelashes as you like.  Glue the smaller diaper piece to the back outside of the box base; aligning at the top center. Use a foam adhesive square to attach the small pacifier oval to the combined pacifier (widest section horizontal).
8. Use a foam adhesive square to attach the combined feet to the back of the box base. Use tiny bit of glue to attach the eyelashes to the combined face.
9. Use a foam adhesive square to attach the combined pacifier to the combined face. Insert the handle into the side slots on the box.  Repeat for the other side.
10. Use a foam adhesive square to attach the combined hands and face to the front of the box base. Finish with ribbons:)









Monday, August 14, 2017

Ms. Owl Teacher Glasses Card

Ms. Owl Teacher Glasses Card- JMRush 
Approximate Card size: H 5.50” X W 4.25”

This design can used with or without glasses, and is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222



1. Cut design pieces. ( I used double sided card stock) 
2. Fold the card base at the score lines. Glue the two eye circles to the eye base. Glue the smaller owl silhouette to the larger one; centering it.
3. Glue the apple to the apple base with stem. Glue the smaller beak to the larger one; centering and aligning at the top.
3. Glue the two small wings and forehead to the combined owl. Glue the two feet into place on the combined owl.
4. Use foam adhesives squares to attach the combined eyes to the owl base. Use a piece of foam adhesive square to attach the combined beak to the coordinating shape in between the eyes.
5.  Add enamel jewels to accentuate the eyes. Use pieces of foam adhesive square to attach the combined apple to the owl. Attach small pieces of foam adhesive squares to the back corners of the glasses.
6. Attach the glasses and finish with a ribbon:) Attach the combined owl with foam adhesive squares to the front of the box base:)


Thursday, August 3, 2017

Ms. Owl Teacher Glasses Basket



Ms. Owl Teacher Glasses Basket- JMRush 
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.50” X W 5.50” including handle


This cute owl basket design is a perfect container for school classroom party favors or teacher appreciation gifts. This design can used with or without glasses, and is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222



1. Cut design pieces. ( I used double sided card stock) 
2. Fold the box base at the score lines. Glue the two eye circles to the eye base. Glue the apple to the apple base with stem. Glue the smaller beak to the larger one; centering and aligning at the top.
3. Apply glue to the top two tabs on the box base and secure to the owl shape above. Use foam adhesives squares to attach the combined eyes to the owl base.
4. Apply glue to the bottom two tabs on the box base and secure to the round shape below forming a complete box. Use a piece of foam adhesive square to attach the combined beak to the coordinating shape in between the eyes.
5.-6. Apply glue to the circular section of the box base and secure the wings; center and align at the bottom. Glue the two small wings and forehead to the combined owl. Glue the two feet into place on the combined owl.
7. Use a foam adhesive square to attach the combined tail section.
8. Turn the box around so that the bird silhouette is facing you. Glue the combined owl to the front of the box base.
9. Insert the handle into the side slots on the box.  Repeat for the other side. 
10. Add enamel jewels to accentuate the eyes. Use pieces of foam adhesive square to attach the combined apple to the box base.
11. Glue the glasses into place and finish with a ribbon:)