Layered Snowman

Layered Snowman-JMR

This design is compatible with the 8x12 and 12x12 mats. Perfect for shirts, totes, wood signs, wall art, vinyl, and more!

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Nativity Scene Gift Tag Ornament

Nativity Scene Gift Tag Ornament-JMR

Approximate size: H 3.5” X W 2.5”

This Nativity Scene design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the black nativity scene to the blue nativity scene shape. (Optional) Flip the gold glitter ornament base over and center the white rectangle shape and attach with glue. This space is for writing a gift message.
3. Using a ribbon, loop through each of the two circular hangers to create a ribbon hanger:)

Wagon Wheel Gift Tag Ornament

Wagon Wheel Gift Tag Ornament-JMR

Approximate size: H 3.75” X W 3.25”

This wagon wheel design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver hollow circle shape to the coordinating spoked brown silhouette with a circular hanger. Glue the smallest silver hollow circle to the small brown hollow circle; centering it.
3. Glue the brown hollow circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and attach the white circle with glue. This hollow circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon and twine for a hanging loop:)

Cowboy Hat Gift Tag Ornament

Cowboy Hat Gift Tag Ornament-JMR

Approximate size: H 2.5” X W 4”

This Cowboy Hat design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the hat shape with cut outs to the brown hat base.
3. Glue the smaller hat shape to the coordinating shape on the combined hat.
4. Glue the smallest hat shape to the combined hat.
5. Glue the thin long brim piece to the coordinating shape on the combined hat. Glue the small red hat band into place on the combined hat.
6. (Optional) Flip the combined ornament over and center the white hat shape and attach with glue. This shape is for writing a gift message.
7. Flip the combined ornament over and attach a piece of twine for hanging:)

Windmill Gift Tag Ornament

Windmill Gift Tag Ornament-JMR

Approximate size: H 5” X W 2.5”

This Windmill design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white windmill and attach with glue. This shape is for writing a gift message.
3. Return the ornament to the front. Glue the brown “x” design frame work shape to the coordinating shape on the combined base.
4. Attach the silver windmill to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)

Cow Head Gift Tag Ornament

Cow Head Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This CowHead design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver cow head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black cow head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon to finish:)

Bull Head Gift Tag Ornament

Bull Head Gift Tag Ornament-JMR

Approximate size: H 4.25” X W 4.25”

This Bull Head design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver bull head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black bull head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon and a jingle bell to finish:)

 

Sheriff Star Gift Tag Ornament

Sheriff Star Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This Sheriff Star design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver barb wire ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. (Optional) Flip the combined ornament over and center the white star and attach with glue. This star is for writing a gift message. 
4. Return the ornament to the front. Fold the star shape at the score lines making sure that the center of each of the star triangles is a peak. Attach the 3D star to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)

 

Layered Tree

Layered Tree-JMR

Approximate size: H 2.75” X W 1.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the green tree with cut outs to the solid green tree.
3. Glue the combined tree to the solid brown tree silhouette:)

 

Barn Gift Tag Ornament

Barn Gift Tag Ornament-JMR

Approximate size: H 4” X W 4.5”

This Barn design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the red barn silhouette to the brown slightly larger barn silhouette with a circular hanger. Glue the pinecone cut out shapes to the coordinating pinecone solid shapes.
3. Glue the doors to the combined barn base as shown. Use pieces of foam adhesive squares to attach the narrow barn roof to the barn base.
4. Glue the center of two of the pine needle designs together as shown. Repeat for the other two pine needle set.
5. Glue one of the pine needle sets to the barn base as shown.
6. Repeat for the other set of pine needles.
7. Tuck the combined pinecones between the pine needles and attach with glue.
8. I curved the pine needles and added a ribbon and adhesive jewel to the center of the ribbon and twine for a hanging ribbon.
9. (Optional) Flip the barn base over and glue the white barn silhouette to the back for writing a gift message:)

Running Horse Gift Tag Ornament

Running Horse Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Running Horse design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Glue the horse circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon for a bow and twine for a hanging ribbon:)

Cowboy Boots Gift Tag Ornament

Cowboy Boots Gift Tag Ornament-JMR

Approximate size: H 4” X W 2.25”

This Cowboy Boots Design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white boot shape and attach with glue. This space is for writing a gift message.
3. Flip the combined boots back over to the front. Glue the two boot shape to the coordinating solid brown combined boot silhouette with a circular hanger.
4. Glue the single boot shape to the combined boot shape.
5. Glue the small black shape to the negative space of the single boot.
6. Finish by adding a ribbon for a bow with a button in the center and attaching twine for a hanging ribbon:)

 

Horseshoe Star Gift Tag Ornament

Horseshoe Star Gift Tag Ornament-JMR

Approximate size: H 5” X W 4.75”

This Horseshoe Star design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the dark greenery to the coordinating shape on the ornament base.
3. Glue the silver ornament shape to the combined ornament base.
4. Fold the star shape at the score lines making sure that the center of each of the star triangles is a peak. Attach the 3D star to the combined ornament base with foam adhesive squares.
5. Using pieces of foam adhesive squares, attach the light green greenery piece to the coordinating shape on the combined ornament,
6. Glue a ribbon bow just above the circular hanger.
7. (Optional) Flip the combined ornament over and center the white star shape and attach with glue. This space is for writing a gift message.
8. Flip the combined ornament back over to the front and use twine as a hanging ribbon:)

 

Cowboy Wreath Gift Tag Ornament

Cowboy Wreath Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Cowboy Wreath design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue two of the four green circular wreath together; alternating the leaves.
3. Repeat for the other two circular wreaths.
4. (Optional) Flip the ornament base over and center the white circle shape and attach with glue. This space is for writing a gift message.
5. Flip the ornament base back over to the front. Glue one set of the green wreaths to the front of the ornament base. 
6. Using pieces of foam adhesive squares, attach the last green wreath combo to the front of the ornament base alternating leaf pattern.
7. Create a bow with ribbon and attach with hot glue just below the circular hanger. I used a red and brown sharpie marker to create the color of adhesive jewel I wanted. 
8. Arrange the jewels in threes along the wreath. I finished the ornament with a button on the bow and twine for a hanging ribbon:)

 

Robot Treat Egg Holder

Robot Treat Egg Holder -JMR

Approximate size: H 4.75” X W 5.5” X D 2.5”

This easy to construct robot treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the gray rectangle with eye cutouts to the coordinating black robot head base solid shape; centering it. Using foam adhesive squares; attach the smaller silver squares to the larger gray squares.
3. Glue two of the silver C shaped robot hands to the coordinating shape on the box base. Use foam adhesive squares to attach the silver robot head shape with eye and mouth cutouts to the combined robot head.
4. Glue the combined robot head and two of the ears to the box base. Use pieces of foam adhesive squares to attach the heart to the box base and one of the small gray circles to the antenna.
5. Flip the box base over. Fold the score lines inward. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
6. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.

7. This is what it should look like:)
8. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
9. Glue the full silver rectangle, small circle antenna, remaining two ears, and remaining two C shaped robot hands to the back of the box base.

10. Flip robot over and attach the combined square feet to the front of the box base using foam adhesive squares. I added adhesive enamel jewels to enhance the eyes and a kinder egg.

Vampire Treat Egg Holder

Vampire Treat Egg Holder -JMR

Approximate size: H 5” X W 4.5” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the vampire face to the coordinating shape on the box base. Glue two of the four curve hands to the front of the full vampire shape as shown.
3. Glue the eyes and collar into place on the box base.
4. Use pieces of foam adhesive squares to attach the red bow tie and the tiny little oval nose. I used adhesive jewels to accentuate the eyes.
5. Flip the box base over. Fold the score lines inward. Flip the full silhouette over and glue the ear/neck section and two remaining hands in place.
6. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry. Use pieces of foam adhesive squares to attach the cape collar on the vampire silhouette piece.

7. Apply glue to the small horizontal tab. Tuck under the vampire figure enclosing the box.

8. Apply glue to the backside of the vampire box base and attach the solid full body shape aligning at the edges.

9. This is what it should look like:)

10. Flip the box over to the front and attach the oval red shoes with foam adhesive squares.

Frankenstein Treat Egg Holder

Frankenstein Treat Egg Holder -JMR

Approximate size: H 5” X W 4.75” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the Frankenstein eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the small green jaw to the coordinating white jaw with teeth; aligning on the bottom and edges.
3. Using foam adhesive squares; attach the combined jaw to the coordinating shape on the full Frankenstein face; aligning at the bottom. Use foam adhesive squares to attach two of the hands to the coordinating shapes on the box base. 
4. Use foam adhesive squares to attach the combined eyes to the combined Frankenstein head. Glue the combined Frankenstein head to the coordinating shape on the box base. Using a piece of foam adhesive square, attach the small part of the tie knot to the tie base.
5. Glue the green back of the head shape and remaining hands to the full Frankenstein figure. Attach the combined tie to the front of the box base.
6. Flip the box base over (pretty side down). Fold the score lines. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.

7. Apply glue to the small horizontal tab. Tuck under Frankenstein figure enclosing the box.

8. Apply glue to the back of the box base and attach the combined full figure.

9. This is what it should look like:)

10. Attach the green oval feet with foam adhesive squares.