Thursday, February 7, 2019

Robot Double Sticky Note Holder



Robot Double Sticky Note Holder-JMR
Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)


1.Cut design pieces. I used double sided card stock. ( I substituted colors on the small antenna circle from grey to silver. Grey is shown in this tutorial and silver on the finished product image)
2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.
3. Top view.
4.- 5. This is what the backside will look like:) Flip the base over as shown. Fold the side tabs as shown.
Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side. Glue the silver head piece with cutouts to the coordinating solid head shape. Glue the two smaller square foot pieces to their coordinating larger square foot pieces; centering them. Glue the two hand pieces to the coordinating shapes on the robot base; centering them.
6. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using pieces of foam adhesive squares, attach the combined feet, the combined head, and the small antenna circle to the coordinating shapes on the robot base. Using a foam adhesive square, attach the heart to the center of the combined robot.
7. Attach the combined robot to the front of the sticky note holder with foam adhesive squares; centering it. 
8. Insert the back of a sticky note stack inside the slot provided. Insert the second sticky note stack into the backside pocket.
9. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)



Tuesday, February 5, 2019

Labrador Double Sticky Note Holder

Labrador Double Sticky Note Holder-JMR
Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  






1.Cut design pieces. I used double sided card stock.
2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.
3. Flip the base over as shown. Fold the side tabs as shown.
Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.
4. This is what the backside will look like:)
5. Turning the base over- Insert the back of a sticky note stack inside the slot provided.
6. Insert the second sticky note stack into the backside pocket.
7. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using foam adhesive squares, attach the lab head piece with eye holes to the solid dog base.
8. Curve the small dog tongue as you like. Using foam adhesive squares, attach the black nose to the muzzle piece and the ears to the coordinating shapes on the combined dog. Glue the tongue by sliding it underneath the open section of the combined dog. 
9.Use a piece of foam adhesive square to attach the nose to the combined muzzle. I glued the top tips of the ears down to the combined dog base and used adhesive jewels to accent the eyes.
10. Insert a pen and finish with a ribbon:)

Schnauzer Double Sticky Note Holder

Schnauzer Double Sticky Note Holder-JMR
Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 



1.Cut design pieces. I used double sided card stock.
2. Flip the base over as shown (pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.
3. Fold the bottom score line back. Fold the side tab score lines toward the back.
4. I flipped the base over on this image so that you can see the folds on the bottom section. Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.
5. This is what the backside will look like:)
6. Turning the base over- Insert the back of a sticky note stack inside the slot provided.
7. Insert the second sticky note stack into the backside pocket.
8. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Glue the red collar piece to the solid dog base.

9. Glue the small round dog tag to the combined dog base at it’s coordinating spot;centering it. Glue the dog face with eye cutouts to the combined dog base;centering it.
10. Curve the small dog tongue as you like. Using foam adhesive squares, attach the small white muzzle to the larger gray muzzle;centering it. Glue the tongue under the white muzzle by sliding it underneath. Use a piece of foam adhesive square to attach the nose to the combined muzzle.
11. Use pieces of foam adhesive squares to attach the combined muzzle to the combined dog base and the ears to their coordinating shapes on the combined dog base. Glue the eyebrow to the combined dog; aligning the edges with the coordinating shapes on the combined dog base. 
12. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)