Schnauzer Double Sticky Note Holder

Schnauzer Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown (pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Fold the bottom score line back. Fold the side tab score lines toward the back.

4. I flipped the base over on this image so that you can see the folds on the bottom section. Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

5. This is what the backside will look like:)

6. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

7. Insert the second sticky note stack into the backside pocket.

8. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Glue the red collar piece to the solid dog base.

9. Glue the small round dog tag to the combined dog base at it’s coordinating spot;centering it. Glue the dog face with eye cutouts to the combined dog base;centering it.

10. Curve the small dog tongue as you like. Using foam adhesive squares, attach the small white muzzle to the larger gray muzzle;centering it. Glue the tongue under the white muzzle by sliding it underneath. Use a piece of foam adhesive square to attach the nose to the combined muzzle.

11. Use pieces of foam adhesive squares to attach the combined muzzle to the combined dog base and the ears to their coordinating shapes on the combined dog base. Glue the eyebrow to the combined dog; aligning the edges with the coordinating shapes on the combined dog base. 

12. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Schnauzer Dog Basket

Schnauzer Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4” including handle

This cute Schnauzer Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the red collar and yellow circle tag to the coordinating shapes on the black dog silhouette. Glue one of the two light gray fur pieces to the front of the basket base; centering it and aligning at the score line on the full dog silhouette shape. Glue the black paw prints to the slightly larger gray paw prints; centering them. Glue the light gray muzzle piece to the gray dog face silhouette with eye cut outs; aligning the edges.
3. Flip the basket base as shown. Fold the basket base at the score lines. Glue the combined gray face piece with eye cut outs to the combined black dog silhouette piece; aligning at the top and edges. Glue the white paw print pieces with cut outs to the combined paw prints.
4. Apply glue to the top two tabs and secure to the rounded backside piece just above.
5. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. 
6. Use foam adhesive squares to attach the combined dog face to the coordinating shape on the basket base.
   
7. Use foam adhesive squares to attach the small muzzle piece to the combined face. Use foam adhesive squares to attach the front two paws to the front of the basket base.
8. Use small pieces of foam adhesive squares to attach the eyebrows. Glue the nose into place on the combined face.
9. Curve the tongue as you like. Apply glue to the top and secure just underneath the small muzzle piece (optional). I used adhesive jewels to accentuate the eyes.
10. Turn the basket to the back side. Glue the second fur piece to the center of the dog backside; center and align at the bottom.
11. Attach the tail and combined back paws to the dog backside using foam adhesive squares.
12. Insert the handle piece into the slots on each side of the combined basket. 
13. I finished with a ribbon:)

Schnauzer Card

Schnauzer Card-JMRush

Approximate size: W 4.25” X H 5.50”

This design is compatible with both 8X12 and 12X12 mats and can be cut on different colored cardstock to create a White, Gray, Black, or any color combination Schnauzer. This design can be used with or without the optional puppy tongue piece.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (The card base is not shown) Glue the circular medallion piece to the head solid base on top of the coordinating circular shape. Glue the collar strip to the solid head piece.

2. Glue the head shape with eye cut out on to the solid head base. 

3. Using foam adhesive squares, attach the largest muzzle piece and attach the ears to the combined head piece.

4. Glue the nose to the smaller muzzle piece. Use foam adhesive squares to attach this piece and the eyebrows to the combined head piece. You can use the oval shaped piece for the puppy’s tongue by gluing it to the bottom side of the smallest muzzle piece. Using foam adhesive squares, attach the head to the card base. Finish with enamel dots to enhance the eyes and around the collar for decoration:)

Schnauzer Hug Treat Box

Schnauzer Hug Treat Box-JMRush

Approximate box size: W 3.25” x D 2.25 x H .75” (H 4.25” including Schnauzer head)

This treat box features character arms that open to a small treat box. This design is perfect for Valentine’s Day, Birthday party favors, or for a thank you for your vet or groomer. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided cardstock for the box base).

2. Fold the box base along score lines. It is not necessary to fold the score lines closest to the tip of each paw.

3. Apply glue to the two top tabs and secure them to the top (head) panel.

4. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box. Glue the largest puppy face to the solid puppy face base.

5. Using foam adhesive squares, attach the small muzzle piece to the larger one. Glue the nose to the combined muzzle piece. Attach the eyebrows and ear pieces to the combined puppy face piece.

6. Using foam adhesive squares, attach the muzzle piece to the combined face. You can use the optional tongue oval piece by applying a dob of glue to the front top of the oval and securing it underneath the smallest muzzle piece.

7. Apply glue to the bottom of the bottom section of the narrow strip. Attach to the back of the box.

8.-9. Using foam adhesive squares, attach the combined head to the box. The paws tuck into the slots on the narrow strip in the center. Attach a foam adhesive square in the center of this strip and secure the heart into place. I finished the puppy with enamel adhesive dots to accent the eyes:)

Schnauzer Hug Gift Card Holder

Schnauzer Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 5.75” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats and can be cut on different colored cardstock to create a White, Gray, Black, or any color combination Schnauzer. This design can be used with or without the optional puppy tongue piece.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1.Cut design pieces. (I used double sided cardstock for the card base)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the circular medallion piece on the solid head base centering it to the similar shape. Glue the collar strip to the solid head piece.

5.Glue the head shape with eye cut out on to the solid head base. 

6. Using foam adhesive squares, attach the largest muzzle piece and attach the ears to the combined head piece.

7.- 8. Glue the nose to the smaller muzzle piece. Use foam adhesive squares to attach this piece and the eyebrows to the combined head piece. You can use the oval shaped piece for the puppy’s tongue by gluing it to the bottom side of the smallest muzzle piece.

9. - 11. Using foam adhesive squares, attach the head to the card base.

The gift card can be inserted into the pocket of the card base and the hands tuck into the slots on the front. Finish with ribbon and I used enamel dots to enhance the eyes:)