Running Horse Gift Tag Ornament

Running Horse Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Running Horse design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Glue the horse circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon for a bow and twine for a hanging ribbon:)

Fireplace Box

Fireplace Box-JMRush

Approximate size: W 4.25 X D 1.50 X H 3.75”

This box features a cut out and when vellum paper and a flameless votive candle is used, it creates a glowing fireplace effect. This design can be used for small gifts, a treat box, or as a flameless candle votive.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Glue the firewood to the inside of the fireplace box.

3. Glue the small vellum square in place on top of the firewood and centering it in the fireplace opening.

4.Fold all score lines.

5. Apply glue to the bottom side tabs.

6. Attach to the side flaps of the fireplace box creating a open box shape. Apply glue to the tabs facing you.

7.Center the large square back panel and secure into place.

8. Fold the score line in the brick patterned piece. Apply glue to the backside of this piece.

9. Center the brick piece with the front of the fireplace and secure into place.

10. The tabs of the brick piece are glued to the back of the box.

11. Using adhesive squares, attach the stocking trim to the stockings and place the squares in the middle of the backside of the fireplace mantel.

12. Center the mantel piece and attach to the top of the fireplace box. Glue the sides of the mantel piece to the box. Glue the stocking into place.

13. Finish with ribbon and place a flameless votive candle in the box to create a glowing fireplace effect. This box can also be used for small gifts or as a treat box:)

Snowflake 3D Gift Tag

Snowflake 3D Gift Tag-JMRush

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines.

3.Apply glue to the front of the circle design piece. Glue it to the back of your Gift Tag base. (This piece is included in case you use double sided paper and need a plain surface to write on:)

4. Apply glue to the right hand backside of one of your snowflakes.

5. Attach the left backside of the next snowflake.

6. Repeat until all score line snowflakes are combined.

7. Apply glue to the backside of the combined 3D snowflake section and glue to the base.

8. Finish with a ribbon and adhesive jewels:)

Gingerbread Man Hug Gift Card Holder

Gingerbread Man Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 5.25” 

This card features character arms that open to release a hidden gift card section. The Gingerbread man has a sweater vest detail on the inside:) This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( There is a bow tie piece that is optional if you would rather use card stock instead of a ribbon).

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the Gingerbread face onto the face base.

5. Glue the sweater vest pieces on the middle section and glue the face pipping into place.

6.Glue the rectangular sweater vest piece on the middle section of the back of the card base.

7. Glue the decorative circle buttons in between the sweater pieces.

8.Glue the pipping on the front side of the hands. I finished with a ribbon:)

9. Insert gift card. The hands tuck into the slots to close the card and complete the “hug”:).

Moose Hug Gift Card Holder

Moose Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 8”

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( There is an optional rectangular piece in case you wish to use card stock instead of ribbon for the scarf)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the moose face piece to the head/antler base.

5. Using foam adhesive squares, attach the moose nose to the face base.

6. Glue the combined face/antler piece to the card base- (line up the circular sections-Image shows the back view)

7. This is a image of the front view.

8. I hot glued 1 1/2 " width ribbon for the moose’s scarf. There is a rectangular cut piece included in this file if you prefer to use card stock:)

9. Glue on the hooves and place them into the cut slots in the card base to close.

10. I finished with adhesive dots for the eyes, a bow, and a sparkle gem on the bow:)

Elf Hug Gift Card Holder

Elf Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7”

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Flip the Face so that the bottom side is face up. Center and glue the teeth onto the face piece. Glue the buckle onto the belt.

5. Flipping the face piece face up glue it onto the face base. Glue on the Hair. Glue the Belt onto the gift card section.

6. Glue the collar piece into place. Glue the hat to the backside of the card base.

7. Glue on the hat trim and feather. Using a piece of foam adhesive square, attach the nose. Glue on the hands and trim. Finish by adding a bow in-between the slots on the gift card section:)

Yeti Hug Gift Card Holder

 Yeti Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6.25” 

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Flip the Head/Beard Piece so that the bottom side is face up. Center and glue the Face onto the Head/Beard piece. 

5. Glue on the black solid head piece. Flip your combined head piece over so it is facing you.

6. Glue the teeth and eyes into place. Attach he nose by using a piece of square foam adhesive.

7. Glue on the hands and trim. Finish by adding a bow in-between the slots on the gift card section. I used adhesive dots to give the eyes a little extra pop:)

Santa Gift Tag

Santa Gift Tag-JMRush

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

Polar Bear Hug Gift Card Holder

Polar Bear Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6.5” 

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( There is an optional rectangular “Scarf” piece incase you choose to use cardstock for the scarf instead of ribbon)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Using pieces of foam adhesive squares, attach the trim pieces to the mittens, the nose to the circular face piece, and the glue the puff ball to the hat base.

5.Glue the Hat Base piece to the Card Base. Using foam adhesive squares attach the hat brim to the hat base and attach the circular face piece to the card base. Glue the eyes on.

6. Glue the mittens to the backside of the paws.

7. I used ribbon as the scarf. I included rectangular cut piece in this design file incase you want to use cardstock for the scarf:)

8. Insert the gift card.

9. The Mittens tuck into the slots on the card base to close the card:)

Snowman Earmuff Hug Gift Card Holder

Snowman Earmuff Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6” 

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the Scarf piece to the Card Base.

5.Attach the earmuffs onto the head with glue. Attach the oval earmuffs to each side and the carrot nose to the caner of the head with foam adhesive squares.

6. Glue the eyes and the mouth circles on. Glue the button between the two slots on the card base.

7. Glue the two remaining buttons to the inside.

8. Insert the gift card.

9. The Hands tuck into the slots on the card base to close the card:)

Santa Hug Gift Card Holder

Santa Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 5.75”

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

 https://www.jamieandjenn.com

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. I used double sided red cardstock for the card base:)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the Oval head piece and the hat sliver on top. Glue on the Santa’s belt and buckle.

5.Glue on Santa’s face.

6. Using foam adhesive squares, place and attach Santa’s mustache. Using glue, attach the eyes and nose.

7. Glue Santa’s hand to the arm wings and then glue on the trim pieces to each hand.

8. Place gift card.

9. Tuck Santa’s hands into the cut slots in the card base.

10. Glue a ribbon in the center of the slots to finish:)

Ornament Swing Card

Ornament Swing Card-JMRush

Card size: W 4.25" X 5.5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card score line. Stack the small rectangular piece on top of the the ornament holder and glue into place. I used a foam adhesive square. Place the second largest ornament piece onto of the largest one. I lined it up toward the upper right. Glue into place.

3.Apply glue to the bottom of the smallest circle and place on top of the second smallest- again lining it up  toward the upper right. Glue this second onto the other ornament pieces.

4. Place a piece of ribbon through the open circle of the ornament holder glueing it on the back( I used hot glue).

5. Apply a dab of hot glue to the opposite end of the ribbon and attach to the top center of the card base. Glue a bow on top to finish it.

6. Your card is complete and your ornament should be able to swing:)

Happy Holidays Layered Card

Happy Holidays Layered Card-JMRush

Card size: 5.5” x 4.25”

This card features a layered snowflake frosted effect when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces.

2. Fold the Card along score lines. Center the lettering on the lettering base and glue into place.

3. Glue the bottom layer (the rectangular piece with he most cut outs) onto the card face. Glue the open rectangular piece on top of the vellum piece.

4.Use foam adhesive squares on the backside of the vellum border piece to attach it to the card base. The adhesive foam squares provide more space in between the layers which assists the frosted effect.

5. Attach the lettering. Finish by adding adhesive jewels.

6. Ta Da:) Your card is complete!