Hunter Santa Hug Gift Card Holder

Hunter Santa Hug Gift Card Holder-JMR

Approximate Card size: 4” x 5.25” 

This card features character arms that open to release a hidden gift card section. The Hunter has a hunting vest detail on the inside:) This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Fold the card along score lines. Glue the stocks of the gun onto the gun base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the Vest pieces into place. Glue the nose on the mustache piece.

5. Glue the oval Beard base into place; centering it with the card base and matching up with the top of the card base. Glue the pocket trim and button onto the pocket base. Glue the Hat and Gloves trim pieces onto their coordinating base pieces.

6.Glue the combined hat and combined pocket piece into place.

7. Glue the face piece into place. Using an adhesive foam square, attach the nose/mustache piece. 

8. Glue the eyes on to the face and black hat shadow piece to the combined hat.

9. Flip the card over. Glue the rectangle piece and combined mittens to the coordinating shapes on the backside.

10. This is what it should look like:)

11. Insert gift card. I used adhesive dots to accentuate the eyes. You can glue the gun into place or tuck it under the mitten.

12. Tuck the mittens into their slots. I used ribbon at the bottom to trim the card:).

Labrador Retriever Card

Labrador Retriever Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. ( I used double sided card stock for the card base)
2. Fold the card base. Glue the largest dog silhouette (solid) to the coordinating shape on the front of the card base.
3. Glue the smallest dog silhouette to the largest dog silhouette on the front of the card base. 
4. Use foam adhesive squares to attach the last dog silhouette to the top of the combined dog silhouette. Glue the collar on. Use a foam adhesive square to attach the ear. Use a adhesive enamel dot for the nose:) 

Reindeer Lantern Top Cookie Box (Flameless)

Reindeer Lantern Top Cookie Box (Flameless)-JMRush

size: W 3.25 x D 3.25 x H 5”

This Flameless Reindeer Lantern Cookie Box features cut outs and when vellum paper is used, a layered frosted glass effect is created. This design has a separate box that will fit 4 medium sized cookies. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Flip the two Lantern top panels over. Apply glue to the bottom of the tab on the right side of the left panel. Align and secure to the next panel.

3.Glue the Vellum circle pieces over the reindeer cut outs.

4. Glue the circular hangers together. ( Make sure the stems of this piece remain separate)

5. Glue one of the stems to the inside of the top of the third reindeer panel.

6. Fold all score lines.

7. Apply glue to backside of the upper tab next to the circular hanger.

8. Connect this tab to the next reindeer panel lining up the seem.

9. Apply glue to the backside of the tab to the left of the circular hanger panel and connect it to the reindeer panel with the circular hanger again lining up the seems. ( make sure that one of the circular hanger stems is still free)

10.Repeat.

11.Repeat with the last tabs closing your box shape.

12.Glue the stem of the circular hanger directly across from where it is already glued. This is what it should look like.

13. Apply glue to the top tabs of the larger cookie square base and secure to the inside of the sides.

14. Repeat for the bottom tabs creating a box.

15. Apply glue to the top tabs of the smaller square candle base and secure to the inside of the sides.

16. Repeat for the bottom tabs creating a shallow box.

17.This is what your pieces should look like:)

18.Glue the decorative reindeer cut out to it’s base.

19. Using hot glue, attach a flameless votive candle to the top of the shallow candle base making sure that the switch is accessible through the rectangular cut.

20. Using 17” of ribbon, feed it through the cut slots on one side making the ends meet.

21. You will not want to finish the following steps until you are ready to insert the cookies/treats and deliver.  Place cookie in the bottom box and turn the candle on. Place the candle box on top of the cookie box and the lantern piece on top of all. Wrap the ribbon across the bottom and to the slots on the other side. Secure by placing the ribbon ends through the reindeer decorative piece. Your goodies are ready to go:)

Hunter Hug Gift Card Holder

Hunter Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 5.25” 

This card features character arms that open to release a hidden gift card section. The Hunter has a hunting vest detail on the inside:) This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. ( There is an optional small rectangular piece in case you do not want to use ribbon at the very bottom of your card - this piece is not shown in the picture) I used double sided paper for the card base:)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the Vest pieces into place. Glue the pocket on and then the pocket trim and button. Glue the stocks of the gun onto the gun base. Glue the nose on the mustache piece.

5. Glue the oval face base into place; centering it with the card base and matching up with the top of the card base. Glue the larger trim pieces onto the hat and the mittens. Glue the smaller trim pieces on top of the first layer of trim on each.

6.Glue the hat and face piece into place.

7. Using an adhesive foam square, attach the nose/mustache piece. Glue the mittens on the front of the hand area of the card base.

8.Glue the eyes on and apply glue to the back of the rectangle vest piece.

9.Glue the rectangle piece on the backside.

10. Insert gift card.

11.Glue the gun into place. To ensure proper placement, tuck the mittens into their slots and make sure that the gun butt is flush with the bottom of the card. (Make sure that the mittens are still operational and that the glue does not flow onto them)

12. I finished the card with adhesive dots for the eyes, hat, and on the gun. I also used ribbon at the bottom to trim the card. There is an optional small rectangular cut piece if you prefer to use cardstock :).