Showing posts with label Lattice. Show all posts
Showing posts with label Lattice. Show all posts

Tuesday, April 12, 2016

Wisteria Lattice Basket



Wisteria Lattice Basket-JMRush
Basket size: W 3.5 x D 3.25 x H 2” (H 4.5” with Handle)

This cute basket is perfect for May Day treats, Mother’s Day, Spring celebration, birthday, or Easter goodies. Wisteria Flowers and Lattice basket design features can be used separately. 




1. Cut design pieces. ( I used double sided card stock).
2. Glue the stem pieces to the Wisteria base. Using foam adhesive squares, attach the two large flower pieces together and the two smaller flower pieces together with the larger one on bottom of each set.
3. Fold all score lines and curve the single flower petals and single leaves.
4.  Apply glue to the bottom of the top two tabs. Secure to the    rectangular fence shape just above the tabs.
5. Apply glue to the tabs just below.  Secure to the rectangular fence shape just below the tabs. You now have a box shape.
6. Insert the handle tab through the top slot on the side of the basket starting from the inside and passing the tab through to the outside of the basket. 
7. Tuck this tab into the bottom slot going from the outside of the basket in to the inside of the basket. Repeat for the other handle tab on the other side.
8. This is what your basket should look like:) Use pieces of foam adhesive squares to attach the two largest flower groups to the Wisteria base. Glue the leaves into place. Glue the single flower petals to the small petal group. I used foam adhesive squares to attach the central petal in this layer. 
9. Glue the small flower group to the Wisteria base.
10.-11. Glue the two complete Wisteria flowers to the basket’s handle and down to the sides of the basket. ( They will overlap at the center of the handle)
12. Finish with ribbons and a enamel dot in the center of the handle. Fill with goodies:)

Monday, April 4, 2016

Rose Garden Lattice Basket

Rose Garden Lattice Basket-JMRush
Basket size: W 3.5 x D 3.25 x H 2” (H 4.5” with Handle)

This cute Rose basket is perfect for May Day treats, Mother’s Day, Spring celebration, birthday, or Easter goodies. Roses, lattice basket, and grass design features can be used separately. This design is compatible with both 8X12 and 12X12 mats. 



1. Cut design pieces. ( I used double sided card stock).
2. Fold all score lines.
3.  Apply glue to the bottom of the top two tabs. Secure to the rectangular lattice shape just above the tabs.
4. Apply glue to the tabs just below.  Secure to the rectangular lattice shape just below the tabs. You now have a box shape.
5. Insert the handle tab through the top slot on the side of the basket starting from the inside and passing the tab through to the outside of the basket. 
6. Tuck this tab into the bottom slot going from the outside of the basket in to the inside of the basket. Repeat for the other handle tab on the other side.
7. This is what your basket should look like:)
8. Glue the grass to the sides of the basket centering each grass design and lining it up with the bottom of the basket.
9. Curve your flower petals and leaves as you like.
10. Use pieces of foam adhesive squares to attach the two largest flower petal pieces in each group. Largest on bottom and offsetting the petal placement. 
11.Glue the two smallest flower petal pieces in the center alternating the petals. Place a piece of foam adhesive square in the center of each of the two large combined petals.
12. Place a adhesive jewel in the center of the combined small petals and attach the small petal group to each of the large petal groups.
13. Use a foam adhesive square to attach the roses to the top of the handle and glue the leaves underneath.
14. Fill with goodies:)

Wednesday, March 30, 2016

Lattice Rose Lantern (Flameless)



Lattice Rose Lantern (Flameless)-JMRush
Lantern size: W 3 x D 3 x H 7”



This Flameless Lattice Rose Lantern features cut outs to simulate the look of lattice. This design is compatible with both 8X12 and 12X12 mats.



1.Cut design pieces. ( I used double sided card stock)
2. Fold the score lines of the lantern body. Center the two lantern body pieces. Apply glue to the backside of the left side tab on the right body lantern piece. Attach to the other lantern piece making sure that the bottoms align (joining the two body pieces).
3. Glue the lattice rectangles to the open panels on the combined lantern body, centering each one.
4.-6. Glue the circular hangers together. ( Make sure the stems of this piece remain separate) Glue one of the stems to the inside of the top of the third from the left window panel. (The other stem will be glued inside the lantern later)
7. Apply glue to the top tab and to the side long tab on the very left side. Secure the long side tab to the other side creating a box.
8. This is what it should look like:)
9. Applying glue to one top tab at a time, begin to secure the top tabs to the inside of the next angled triangle.  The other Circular hanger stem will be glued to the inside of the opposite side of the lantern.
10. Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides.
11. Repeat for the bottom tabs creating a shallow box.
12. Glue the grass design to each side of the lantern square base.
13. Curve your flower petals and leaves as you like.
14. Use pieces of foam adhesive squares to attach the three largest flower petal pieces. Largest on bottom and offsetting the petal placement. Glue the smallest flower petal piece and place a enamel dot in the center. 
15. Use a foam adhesive square to attach the rose to the top and glue the leaves underneath.
16. Place the lantern top in it’s base. Finish with by placing a flameless candle inside:)

Wednesday, January 13, 2016

Valentine Lattice Lantern (Flameless)



Valentine Lattice Lantern (Flameless)-JMRush
Lantern size: W 3 x D 3 x H 7”


This Flameless Valentine Lattice Lantern features cut outs and when vellum paper is used, a layered transparent frosted effect is created. This design is compatible with both 8X12 and 12X12 mats. 




1.Cut design pieces. ( This picture shows the small heart detail stacked)
2. Flip the two lantern base pieces over. Center the heart panels to each window in the lantern base face down. Apply glue and secure into place.
3. Glue the vellum rectangles on top of the heart panels, centering each one.
4. Fold all score lines. 
5.Apply glue to the long side tab of the lantern window base and secure to the other lantern window base piece.
6. This is what it should look like:)
7.-9. Glue the circular hangers together. ( Make sure the stems of this piece remain separate) Glue one of the stems to the inside of the top of the third from the left window panel. (The other stem will be glued inside the lantern later)
10.Flip the lantern so the face is up. Glue the open rectangle pieces to each window.
11. Flip the lantern face down again. Apply glue to the top tab and to the side long tab on the very left side.
12. Secure the Long side tab to the other side creating a box.
Applying glue to one top tab at a time, begin to secure the top tabs to the inside of the next angled triangle.  The other Circular hanger stem will be glued to the inside of the opposite side of the lantern.
13. Finish securing all of the top tabs.
14. Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides.
15. Repeat for the bottom tabs creating a shallow box.
16. Glue the small open heart design to the solid heart.
17. Using a foam adhesive square, attach the combined hearts to the heart base.
15. Place the lantern top in it’s base. Finish with a ribbon and place a flameless candle inside:) I used another adhesive square to attach the heart to the top of the lantern.








Thursday, September 24, 2015

Lattice 3D 4X6 Frame

Lattice 3D 4x6 Frame - JMRush 
Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This frame has a intricate cut design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file (excluding your pictures;) This design requires a 12X12 cutting mat.





  1. Cut out design piece.
  2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
  3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later and so that inserting your photo is easy:)
  4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
  5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
  6. Repeat this steps for each of the frame sides.
  7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
  8. Repeat for each tab.