Hip Hip Hooray!Card- JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats and contains a gift card/money pocket.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock any glitter card stock)

2. Flip the card base over as shown. Glue the white square to the center panel and secure until dry.

3. Apply glue to the top panel around the words. Secure the glitter square pretty side down and secure until dry.

4. Fold score lines. Fold side tabs in toward the center. Apply glue to the side tabs on either side of the bottom panel. Fold the bottom panel toward toward the center panel and secure until dry. This will create a pocket.

5. Insert gift card or money.

6. Your card is complete:)

 

Graduation Picture Frame 4X6 2018

Graduation Picture Frame 4X6 2018-JMRush

Frame Dimensions: W 4.5 x H 6.5”

The Graduation Picture Frame 2018 is self standing and can be used horizontally or vertically. This design is compatible with both 8X12 and 12X12 mats and folds flat for mailing.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) Be careful when removing the grad hat piece with the year cut out. It is delicate.
2. Glue the smaller mat to the top of the larger mat. Attach the grad hat with the year cut out to the solid grad hat piece ( I used foam adhesive squares for dimension:)
3. Apply glue to the back of the combined mat piece just along the very top. Secure to the front of the frame base. (Make sure the the score lines are at the bottom of the frame base)
4. Use foam adhesive squares to attach the combined grad hat to the center of the top of the combined frame pieces. ( This frame can also be used horizontally by glue the mat along the horizontal top instead of the vertical as directed above)
5. Insert picture by lifting the mat. The score lines on the frame base can be used to utilize the kick stand:)

Ms. Owl Teacher Glasses Basket

Ms. Owl Teacher Glasses Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 5.50” including handle

This cute owl basket design is a perfect container for school classroom party favors or teacher appreciation gifts. This design can used with or without glasses, and is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) 

2. Fold the box base at the score lines. Glue the two eye circles to the eye base. Glue the apple to the apple base with stem. Glue the smaller beak to the larger one; centering and aligning at the top.

3. Apply glue to the top two tabs on the box base and secure to the owl shape above. Use foam adhesives squares to attach the combined eyes to the owl base.

4. Apply glue to the bottom two tabs on the box base and secure to the round shape below forming a complete box. Use a piece of foam adhesive square to attach the combined beak to the coordinating shape in between the eyes.

5.-6. Apply glue to the circular section of the box base and secure the wings; center and align at the bottom. Glue the two small wings and forehead to the combined owl. Glue the two feet into place on the combined owl.

7. Use a foam adhesive square to attach the combined tail section.

8. Turn the box around so that the bird silhouette is facing you. Glue the combined owl to the front of the box base.

9. Insert the handle into the side slots on the box.  Repeat for the other side. 

10. Add enamel jewels to accentuate the eyes. Use pieces of foam adhesive square to attach the combined apple to the box base.

11. Glue the glasses into place and finish with a ribbon:)

Graduation Hat Pocket Gift Card

Graduation Hat Pocket Gift Card-JMRush

Approximate Size: W 7.25” X H 3.75”

This design has a sliding compartment that is sized to hold American paper currency or most gift cards and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

1. Cut design pieces. I used double sided card stock.
2. Fold the score lines on the two card bases.  (There is a enlarged photo below to assist in folding the card bases. Green lines fold down. Red folds up. The lower card base if turned so that the point is pointing up instead of down.) Glue the thinner word to the thicker word base. Glue the small oval to the larger oval base. Glue the smaller hat pieces to their larger coordinating shapes. ( There is a small tab in the center of the smaller top hat piece that can be used to secure a real tassel or thread if you prefer. Make sure this tab is up and not glued down if you decide to not use the tassel piece provided) Glue the side banner pieces (2) to the coordinating shape on the full banner. Glue the smaller curved banner piece to it’s coordinating larger shape.
3. Apply glue to the side tabs on the lower card base and fold the bottom section to them.
4. Apply glue to the side tabs on the upper card base and secure to the upper rectangular panel.
5. This is what it should look like.
6. Push down on the top of the upper card base and crease the folds.
7. Apply glue to the top section of the upper card base and secure the combined top hat piece to it; aligning at the top of the card.
8. Glue the bottom combined hat piece to the lower card base at the coordinating “v” shape. Glue the combined word to the combined curved banner piece.

9.  Use foam adhesive on the center backside of the combined curved banner and secure to the coordinating shape on the combined full banner piece. (You can glue the side edges down to the combined full banner if you want a more rounded appearance). Using a thin round dowel, wrap the tassel piece around to the backside.

10.   Apply glue to the very top to secure the tassel piece

11.  Apply glue to the center of the combined top hat. Secure the oval shape of the tassel to it. ( You can attach a real tassel to the tab if not using the tassel provided)

12.  Glue the combined small oval piece on top of the oval shape of the tassel.

13.  This is what it should look like:)

14.  Apply glue to the lower section on either side ( where my fingers are pointing) and attach to the lower section.

15.  Insert a gift card or money. The top section will flex.

16.  Insert the upper combined card base into the lower combined card base.

17.  Glue the combined banner to the front of the lower combined card base.

Dog Candy Pocket

Dog Candy Pocket- JMRush 

Approximate size: W 5” X H 6.5

Approximate Pocket size: W 3” X H 4”

The Dog Candy Pocket has a open center section that is perfect for holding snack sized candies for classroom parties, birthday party treats, or for Valentine’s Day. This file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1.Cut design pieces. ( I used double sided card stock)

2. Fold the tabs on the dog pocket piece. Apply glue to the tabs. 

3. Fold forward and secure to the upper shape of the pocket. Glue the dog head with cut outs to it’s matching solid base.

4. Curve the tongue ( this is an optional piece ) as you like:) Use foam adhesive squares to attach the coordinating ear shapes to the combined dog head.

5. (optional) Glue the tongue to the combined dog head; centering it and aligning it at the bottom.

6. Use foam adhesive squares to attach the muzzle piece ( centering around the nose shape) and nose to the combined dog head.

7. Use foam adhesive squares to attach the combined dog head to the coordinating shape on the head/back piece; aligning at the bottom. Use foam adhesive squares to attach the pocket piece to the dog base with legs and a tail; centering and aligning at the straight edge of the bottom.

8. Glue the combined dog head to the combined pocket base piece; aligning along the curved edges. I finished with enamel dots to accentuate the eyes, a ribbon, and inserted snack sized Laffy Taffy in the pocket:)

Skunk Candy Pocket

Skunk Candy Pocket- JMRush 

Approximate size: W 4.5” X H 9.25”

Approximate Pocket size: W 3” X H 4”

The Skunk Candy Pocket has a open center section that is perfect for holding snack sized candies for classroom parties, birthday party treats, or for Valentine’s Day. This file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Fold the tabs on the skunk pocket piece. Apply glue to the tabs. Fold forward and secure to the upper shape of the pocket. Glue the skunk face with cut out eyes to the skunk head solid base. Glue the oval shaped skunk stripe piece to the skunk's back body shape without a head.

3. Glue the smile and cheek dots to the combined skunk head. Use a foam adhesive square to attach the skunk nose. Turn the full skunk silhouette so that the tail is facing down.

4. Attach the pocket to the skunk shape with a tail using foam adhesive squares. Aligning at the base of the skunk tail.

5. Glue the tail to the combined skunk base piece. Apply glue to the combined skunk base pocket piece .

6. Attach the skunk’s back to the pocket.

7. Attach the combined head to the combined skunk base using foam adhesive squares and aligning the edges on each side. I curved the skunk's ears forward a bit. I finished with a ribbon and a enamel dot and inserted a Ghirardelli chocolate square in the pocket:)

Cat Candy Pocket

Cat Candy Pocket- JMRush 

Approximate size: W 4.5” X H 8”

Approximate Pocket size: W 3” X H 4”

The Cat Candy Pocket has a open center section that is perfect for holding snack sized candies for classroom parties, birthday party treats, or for Valentine’s Day. This file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( There is no heart design in this file but is shown in images...oops)

2. Fold the tabs on the cat pocket piece. Apply glue to the tabs. Fold forward and secure to the upper shape of the pocket. Glue the cat head with cut outs to it’s matching solid base.

3. Glue the inner ear (two small triangular shaped) pieces to the coordinating shape on the combined cat head.

4. Attach the pocket to the cat shape with a tail using foam adhesive squares. Aligning at the base of the cat tail.

5. Cut three sections of thread and glue their centers to the top center of the front side of the muzzle piece.

6. Glue the nose on top of the center glue/thread on the muzzle piece.

7. Attach the combined muzzle to the combined cat using foam adhesive squares. Attach the combined head to the combined cat base using foam adhesive squares and aligning the edges on each side.

8. I finished with enamel dots to accentuate the eyes, a ribbon, and inserted snack sized Reese’s pieces in the pocket:)

Bear Hug Candy Pocket

Bear Hug Candy Pocket- JMRush 

Approximate size: W 4.25” X H 5.75”

Approximate Pocket size: W 2.5” X H 3.25”

The Bear Hug Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats.

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Fold the tabs on the bear card base. Apply glue to the tabs. Fold forward and secure to the bear shape of the card base. 

3. Glue the Bear head with cut outs to it’s matching solid base. Glue the two feet with cut outs to their solid bases.

4. Glue the combined bear head to the card base. Using a foam adhesive square, attach the nose to the muzzle piece with a cut out smile.

5. Use foam adhesive squares to attach the combined nose/muzzle piece to the combined bear. Tuck the bear hands into the slots in the center. Apply glue to the bottom corners of the card base and secure the combined feet to each corner.

6. Attach the heart with a foam adhesive square and place a foam adhesive square on the backside of the rounded tail piece.

7. 8. 9. 10. Place the tail on the backside of the card base. I finished with a ribbon, enamel dots to accentuate the eyes, and placed a chocolate square in the pocket:)

Dry Erase and Highlighter Caddy

Dry Erase and Highlighter Caddy-JMRush 

Approximate size: W 5.5” X  H 7.25” X D 3.5”

This caddy is perfect for organizing and keeping up to 20 Dry erase or highlighter markers handy. This design is compatible with 8x12 or 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You may also be interested in:

 Ultra Fine Point Marker Caddy  http://jmrushdesigns.blogspot.com/2016/09/ultra-fine-point-marker-caddy.html 

Fine Point Marker Caddyhttp://jmrushdesigns.blogspot.com/2016/09/fine-point-marker-caddy.html

1.Cut design pieces.

2. Fold the score lines on the two handle bases. Glue the scalloped handle pieces to the front of each of the handle bases; centering around the coordinating shape of the handle.

3. Apply glue to the backside of one of the combined handle base pieces being careful not to apply glue to the bottom section under the score line. Glue the backsides of the two combined handle bases together.

4. Image of the two bottom sections not glued together:)

5. Flip the caddy box base over ( pretty side down). Fold the score lines on the caddy box base. Apply glue to the backside of the two top tabs. Secure to the panel in the center.

6.Repeat for the bottom two tabs forming a box shape. 

7. Apply glue to the bottom sections of the combined handle piece. Center and attach to the inside of the caddy box base.

8. Image of the combined handle piece glued inside the caddy base.

9. Flip one set of the marker box pieces over (pretty side down). Fold the score lines. Apply glue to the backside of the scalloped edge of the smaller marker box piece. Align with the circles and score lines of the larger marker box piece and secure.

10. Apply glue to the backsides of the top center and bottom center tabs. Secure to the rectangle shapes above and below to the left of the tabs.

11. Apply glue to the tabs in the center of the combined marker box and secure to the large rectangle to the right.

12. Apply glue to the small tabs and the long tab. The two small tabs fit inside the box and the long tab is also glued inside the marker box.

13. Image of the tab being secured. Repeat for the other two marker box pieces.

14. Helpful Hint- I used the end of a paintbrush inside of the marker holes to help secure the tabs into place.

15. I finished with a ribbon:)

Pencil Print and Cut

This Print and Cut design is compatible with 8x12 or 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

School Bus Treat Box

School Bus Treat Box-JMRush

Approximate size: W 6.25” X  H 3.5” X D 2”

The School Bus Treat Box has an attached lid and is great for back to school treats or teacher appreciation presents. This design is compatible with 8x12 or 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

Color Guide for Design Pieces-

1.Cut design pieces. ( I used double sided card stock) Glue the largest circles to the matching shapes on the solid truck shapes.

2. Glue the truck shapes with cut outs to the coordinating solid truck shape. Glue the second largest circles to the largest circles that you just attached to the solid truck shape; centering it within the circles.

3. Glue the smaller door frames to the larger ones (2). Glue the third largest circles to the combined circles on the combined truck shape; centering them.

4. Glue the front grill shape with cut outs to it’s solid base. Glue the “School Bus” sign to it’s solid base. Glue the thin cut out rectangular window shapes with rounded corners to the coordinating shapes ( The windshield wiper design and back window). Center and glue the thinner solid rectangular shape to the wider one- creating a combined piece that appears to have yellow in the middle and a black stripe on the top and bottom. Glue the hollow circle shapes to the round taillight shapes.

5. Glue the solid rectangle piece with rounded corners to the backside of the windshield wiper combined piece. Glue the smallest white circles to the combined grill shape in the coordinating shapes.

6. Flip the box bases over ( pretty side down) as shown in the photo. Fold the long tab in the center and apply glue to the backside. Line up the two box base pieces and attach.

7. Fold the tabs on the smallest box base piece and align with the the bottom section to the left of the seam. Apply glue to the top tab and secure into place.

8. Fold the tabs on the upper left of the combined box base. Apply glue to the backside of the tab closest to the center. Attach to the center strip to the right of the tab.

9. Apply glue to the top center tab and secure it to the right side of the box base.

10. Apply glue to the bottom most tabs on the front of the box base. Glue to the inside of the box edges.

11. Repeat for the next set of tabs.

12. Repeat for the next set of tabs. Now the sides of your box are enclosed.

13. Close the top box tab by securing the tab in the coordinating slot on the side of the box base.

14. Glue the combined bus shape to it’s coordinating box base side.

15. Glue the long wheel hub to the coordinating side.

16. Glue the combined door and the school bus combined sign.

17. Glue the other combined bus piece to the other side. (Be careful not to glue the top backside of truck design with a window so as not to glue the box tab closure slot)

18. This is what it should look like.

19. Glue the other long wheel hub to this side.

20. Fold the tab so that the bumper sticks out. Glue the end section to the other side of the truck

 (there is a score line to line up with:)

21. Repeat for the other side. Tuck the end score line underneath the other wheel hub piece.

22. Glue the other combined door to the coordinating shape on the box base. Glue the combined stripe rectangular piece on.

23. Use pieces of foam adhesive squares to attach the smaller wheel hub shapes (2) to the coordinating shape on each side.

24. Glue the solid rectangular pieces to their coordinating shapes on the front and top of the truck box base. Glue the combined windshield wiper piece on.

25. Glue the combined grill piece with headlights to the front of the truck box base.

26. Glue the combined backside piece to the back of the truck. Glue the rectangular shape with rounded corners to the inside of the window.

27. Glue the small taillight circles to the backside of the truck.

28. Your box is complete:)

Female Teacher Card

Female Teacher Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This card is perfect for teacher appreciation. This file is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. 
2. Fold the card at the score lines. Glue the dress to the body. Glue the chalk board ( rectangular piece) to the front of the card.
3. Glue the apple piece to the apple base with a stem. Glue the long thin rectangular chalk board runner pieces on top of the chalkboard rectangular piece. Use pieces of foam adhesive squares toward the top (strap) backside of the bikini top shaped piece and attach to the combined female figure.
4. Glue the combined female figure to the card. Glue the words “ Thank You” to the front of the card.
5. Use foam adhesive squares on the backside of the arm piece at the wrists. Attach the arms to the combined female figure- centering it and aligning it with the bottom. Glue the tops of the arms (backsides) to the combined female figure. Tuck the combined apple into the hands. Use foam adhesive squares to attach it to the bottom layer. Finish with enamel dots as a necklace:)
6. :)

You Rule Card

You Rule Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This card is perfect for teacher appreciation, graduation, or as a thank you. This file is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces. 
2. Fold the card at the score lines. Glue the ruler the ruler solid base and attach to the front of the card at the bottom. Glue the wording on the front of the card- centering it. Glue a strip of ribbon just above the ruler.
3. Glue a bow to the strip of ribbon:)

Apple Treat Box

Apple Treat Box-JMRush

Approximate Box size: W 3” X D 2.5” X H 2.5” (H 5.5” with Handle)

This treat box is perfect for Teacher appreciation. This file is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces.

2. Fold the score lines on the box base. Apply glue to the bottom of the top two tabs. Secure to the apple shape just above the tabs.  Apply glue to the tabs just below.  Secure to the apple shape just below the tabs. You now have a box shape. 

3. Insert the handle tab through the top slot on the side of the box. Repeat for the other side. 

4. Use a foam adhesive square to attach the apple shape to the apple with a stem/leaf piece. Repeat. 

5. Glue the combined apple to each side.

6. Finish with a ribbon and fill with goodies:)