Thursday, December 19, 2019

Gnome Gift Tag Ornament



Gnome Gift Tag Ornament-JMRush
Approximate Card size: H 4.75” X W 3”
This Gnome design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)


  1. Cut design pieces. I used double sided card stock.
  2. Glue the largest Gnome suit piece (black) to the full solid gnome figure base. Glue the small hat brim piece to the hat base. Glue the holly berries to the holly leaf base. 
  3. Glue the small Gnome suit piece to the combined full Gnome figure base; aligning at the bottom center and edges. I curled the edges of the combined holly and glued it to the combined hat piece.Glue the nose to the mustache piece; centering it.
  4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the combined hat and nose/mustache to the combined head.
  5. Use foam adhesive squares to attach the combined gnome head to the gnome body base. 
  6. I used enamel adhesive jewels to accentuate the holly. Finish by adding a ribbon for a hanger.


Wednesday, December 18, 2019

Cardinal Gift Tag Ornament




Cardinal Gift Tag Ornament- JMRush 
Approximate size: W 5.25” X H 3”

This Cardinal Bird design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)



  1. Cut design pieces. I used double sided card stock.
  2. Glue the largest bird silhouette(red) to the gift tag base. Glue the long red wing to the brown wing base. Glue the bird face to the bird (yellow) beak.
  3. Glue the combined face and the feet to the coordinating shapes on the combined bird gift tag.Glue the large (light red) body to the combined bird gift tag. Glue the smaller (light red) feathers to last dark red wing piece.
  4. Using foam adhesive squares, attach the combined little wing to the combined long wing.
  5. Using foam adhesive squares, attach the combined wing to the combined bird gift tag base. Loop a ribbon through the center hole for a hanger and tie the ends together. I used an enamel adhesive jewel to accentuate the eye.
  6. Flip the tag over and glue the white full bird silhouette to the back when using this design as a gift tag:)

Gingerbread Man Gift Tag Ornament


Gingerbread Man Gift Tag Ornament- JMRush 
Approximate Tag size: H 4.25” X W 3.25”

This Gingerbread man design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 


You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  


  1. Cut design pieces. I used double sided card stock.
  2. Flip the gingerbread man base over and glue the white gingerbread man base to it; centering it. Glue the round gingerbread man head with holes to the coordinating solid head base. 
  3. Flip the combined base over. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
  4. Glue the two hand and two foot curvy pieces to the combined base. Glue the combined nose to the combined face.
  5. Use foam adhesive squares to attach the combined head and combined candy pieces to the front of the card base.
  6. I used enamel adhesive jewels to accentuate the eyes and finish with a ribbon:)

Wednesday, December 11, 2019

Joy Santa Gnome Card



Joy Santa Gnome Card- JMRush 
Approximate Card size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  


  1. Cut design pieces. I used double sided card stock.
  2. Glue the largest Gnome suit piece to the full solid gnome figure. Glue to hat base piece to the gnome head base. Glue the holly berries to the holly base. 
  3. Glue the small Gnome suit piece to the combined full Gnome figure; aligning at the bottom center and edges. Glue the hat brim piece to the combined gnome head piece.
  4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the nose/mustache to the combined head and the green wreath to the black wreath base.
  5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. Glue the combined holly to the hat.
  6. Use foam adhesive squares to attach the combined gnome head to the gnome body base. Glue the lettering to the coordinating shapes on the card base.
  7. Use foam adhesive squares to attach the combined gnome to the front of the card. I used adhesive enamel jewels to decorate the wreath:)

Polar Bear Flip Gift Card


Polar Bear Flip Gift Card- JMRush 
Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.
You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 




  1. Cut design pieces. I used double sided card stock.
  2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
  3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
  4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
  5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
  6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
  7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
  8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
  9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
  10. Ta Da!

Tuesday, December 10, 2019

Gingerbread Man Flip Gift Card



Gingerbread Man Flip Gift Card- JMRush 
Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 




  1. Cut design pieces. I used double sided card stock.
  2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
  3. Apply glue to the side tabs on the card base.
  4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
  5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
  6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
  7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Monday, December 9, 2019

Gnome Flip Beard Gift Card




Gnome Flip Beard Gift Card- JMRush 
Approximate Card size: H 6.25” X W 4.25”

This design has a gift card pocket under the Gnome’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  



  1. Cut design pieces. I used double sided card stock.
  2. Fold the card base at the score lines. Glue the largest Gnome suit piece to the middle layer of the card base. Glue the small Gnome suit piece to the black Gnome bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base. Apply glue to the side tabs on the card base.
  3. Attach the side tabs to the middle section. Allow to dry. Glue the square buckle into place. Glue the hat detail to the hat base.
  4. Insert gift card. Glue the combined Gnome suit piece to the coordinating shape on the card front.
  5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:) Use a piece of foam adhesive square to attach the combined holly to the hat.
  6. Find placement of the hat. Use foam adhesive squares to attach the nose and mustache. Apply glue to the top of the card base and attach the combined hat:)
  7. Ta Da!