Robot Treat Egg Holder

Robot Treat Egg Holder -JMR

Approximate size: H 4.75” X W 5.5” X D 2.5”

This easy to construct robot treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the gray rectangle with eye cutouts to the coordinating black robot head base solid shape; centering it. Using foam adhesive squares; attach the smaller silver squares to the larger gray squares.
3. Glue two of the silver C shaped robot hands to the coordinating shape on the box base. Use foam adhesive squares to attach the silver robot head shape with eye and mouth cutouts to the combined robot head.
4. Glue the combined robot head and two of the ears to the box base. Use pieces of foam adhesive squares to attach the heart to the box base and one of the small gray circles to the antenna.
5. Flip the box base over. Fold the score lines inward. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
6. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.

7. This is what it should look like:)
8. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
9. Glue the full silver rectangle, small circle antenna, remaining two ears, and remaining two C shaped robot hands to the back of the box base.

10. Flip robot over and attach the combined square feet to the front of the box base using foam adhesive squares. I added adhesive enamel jewels to enhance the eyes and a kinder egg.

Frankenstein Treat Egg Holder

Frankenstein Treat Egg Holder -JMR

Approximate size: H 5” X W 4.75” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the Frankenstein eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the small green jaw to the coordinating white jaw with teeth; aligning on the bottom and edges.
3. Using foam adhesive squares; attach the combined jaw to the coordinating shape on the full Frankenstein face; aligning at the bottom. Use foam adhesive squares to attach two of the hands to the coordinating shapes on the box base. 
4. Use foam adhesive squares to attach the combined eyes to the combined Frankenstein head. Glue the combined Frankenstein head to the coordinating shape on the box base. Using a piece of foam adhesive square, attach the small part of the tie knot to the tie base.
5. Glue the green back of the head shape and remaining hands to the full Frankenstein figure. Attach the combined tie to the front of the box base.
6. Flip the box base over (pretty side down). Fold the score lines. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.

7. Apply glue to the small horizontal tab. Tuck under Frankenstein figure enclosing the box.

8. Apply glue to the back of the box base and attach the combined full figure.

9. This is what it should look like:)

10. Attach the green oval feet with foam adhesive squares.

Alien Treat Egg Holder

Alien Treat Egg Holder -JMR

Approximate size: H 5” X W 2.5” X D 2.5”

This easy to construct alien treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the alien eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the Green half alien face with cut outs to the white half alien face with cute outs and teeth; centering and aligning at the top.
3. Ignore this image- This image shows the box base and full figure flipped over. Do NOT glue the full figure to the box base at this point. I discovered during assembly that it is easier to glue it onto the back after assembly. This tutorial shows it glued into place. My mistake. 
4. Using foam adhesive squares, attach the full alien head to the cording shape on the front of the box base.
5. Glue the combined eyes and pink inside of the mouth into place.
6. Using pieces of foam adhesive squares, attach the hands, combined half face, and antennas to the coordinating shapes on the box base.
7. This is what it should look like:)
8. Flip the box base over. Fold the score lines inward.

1. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
2. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.
3. Image of tucking the tab.
4. Image of tucking the tab.
5. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
6. This is what it should look like:)

 

Santa Handle Basket

Santa Handle Basket-JMR

Approximate size: W 4.5” x D 3” x H 5.5” (including handle)

Approximate box size: W 2.75” x D 2.25” x H 2.25”

This cute Santa Basket is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the white santa head to the coordinating beige santa head. Glue the beige hands to the coordinating white hands with ruffles.

3. Glue the combined santa head to the coordinating shape on the basket base. Glue the large hat piece to the coordinating shape on the combined basket base.

4. Using foam adhesive squares, attach the ruffle hat brim to the small hat piece and the black shoe heels to the shoe bases.

5. Glue the tiny black eye circles to the coordinating holes on the combined base. Attach the combined small hat piece to the combined base using foam adhesive squares.

6. Attach the eyebrows using pieces of foam adhesive squares. Attach the puff ball to the hat and  the nose to the mustache using foam adhesive squares.

7. I used adhesive jewels to accentuate the eyes.

8. Flip the base over as shown.

9. Apply glue to the two top tabs on the basket base and attach to the rounded section of the basket.

10. Repeat for the lower two tabs; creating a box.

11. This is what it should look like:)

12. Attach the combined hands to the front using foam adhesive squares.

13. Attach the combined shoes to the back using foam adhesive squares. Glue the belt buckle to the center of the handle.

14. Insert the handle to the slot on either side of the basket.

15. I added a ribbon to the handle:)

 

Lion Basket

Lion Basket-JMR Approximate Completed Design size: W 5.25” x D 3” x H 6” (including handle) Approximate Box Dimensions: W 3” X D 2.5” X H 2.5” 

This cute Lion Basket is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

 You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Flip the basket base over as shown and fold score lines on the basket base.  Glue the Lion face with eye holes to the solid lion face. Glue the solid black back paws to the solid yellow paws; centering them.

3. Apply glue to the two top tabs on the basket base and attach to the center box.

4. Repeat for the lower two tabs; creating a box.

5. Your box should look like this.

6. Attach the two mane pieces together with a foam adhesive square. Attach the nose to the muzzle piece and the top of the tail to the tail base with a foam adhesive square.

7. Use foam adhesives squares to attach the combined mane to the center of the lion face on the box base. Glue the paw prints to the combined paw prints. Use foam adhesives squares to attach the combined muzzle to the combined lion head.

8. Use foam adhesive squares to attach the combined lion head to the combined mane on the box base.

9. Turning the box base around, Attach the combined paws and combined tail with foam adhesive squares.

10. Insert the handle into the slots on either side of the box base.

11. -12. I used enamel adhesive jewels to accentuate the eyes and finished with a ribbon:)

Bear Flowers Basket

Bear Flowers Basket-JMR

Approximate size: W 4” x D 3” x H 5.25” (including handle)

This cute Bear Basket is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1 .Cut design pieces. (I used double sided card stock)

2. Flip the basket base over and fold score lines on the basket base. Use foam adhesives squares to attach the bear face to the solid bear face.

3. Use foam adhesives squares to attach the now to the combined bear face. Glue the paw prints to the solid paw print bases. Use foam adhesives squares to attach the smaller front paws to the larger front paws.

4. Apply glue to the two top tabs on the basket base and attach to the center box.

5. Repeat for the lower two tabs; creating a box. 

6. Attach foam adhesive squares to the back of the combined bear head and attach to the coordinating shape on the basket.

7. Use foam adhesives squares to attach the combined front paws to the front of the basket.

8. Flip the basket to the backside. Use foam adhesives squares to attach the combined paws and tail to the backside of the basket.

9. Insert the handle into the slots on either side of the basket base.

10. Curve the flower petals.

11. Glue the smaller petals to the second smallest petals;alternating petals. Glue the second largest petals to the largest petals;alternating petals.

12. Glue the petal sections together;alternating petals. Use adhesive jewels to accent the center of each combined flower.

13. Glue the two smaller flower groupings to the combined bear head.

14. Use foam adhesives squares to attach the combined large flower grouping to the combined bear head:)

Gingerbread Man Gift Tag Ornament

Gingerbread Man Gift Tag Ornament- JMRush 

Approximate Tag size: H 4.25” X W 3.25”

This Gingerbread man design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Flip the gingerbread man base over and glue the white gingerbread man base to it; centering it. Glue the round gingerbread man head with holes to the coordinating solid head base. 
3. Flip the combined base over. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
4. Glue the two hand and two foot curvy pieces to the combined base. Glue the combined nose to the combined face.
5. Use foam adhesive squares to attach the combined head and combined candy pieces to the front of the card base.
6. I used enamel adhesive jewels to accentuate the eyes and finish with a ribbon:)

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Snowman Chocolate Belly Holder

Snowman Chocolate Belly Holder-JMRush 

Approximate size: W 3.5 x D 2.25 x H 4.25”

This easy to construct chocolate holder is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Flip the box base over. 
3. Apply glue to the side tabs and secure the bottom panel; aligning at the edges.
4. Apply glue to the last tab and tuck under the snowman shape;align at the edge.
5. Image of the backside. 
6. Apply glue to the backside of the snowman shape (as shown) and secure the solid snowman to the snowman base; centering it.
7. Flip the combined snowman to the front.
8. Use a glue to attach the hat, nose, arms, and scarf piece to their coordinating shapes on the combined snowman base.
9. This is what it should look like:)
10. Glue the belt buckle to the center of the belt. Glue the heels of the shoes to the shoe bases.
11. Glue the belt so it form a circular shape the size of the chocolate.
12. Place the belt around the chocolate. I used small adhesive jewels to accent the eyes.

Unicorn Candy Pocket

Unicorn Candy Pocket-JMR

Approximate size: W 3.75” X H 7.25”

Approximate Pocket size: W 2.5” X H 3.25”

The Unicorn Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, a gift card, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the tabs on the unicorn base. Apply glue to the tabs. Fold forward and secure to the unicorn shape of the base. Glue the black unicorn face to the large pink unicorn head with a mane; aligning at the ears. Glue the unicorn horn with cutouts to it’s matching solid base.

3. Use foam adhesive squares to attach the tail to the bottom of the unicorn base and the unicorn face with cutouts to the combined unicorn head; aligning at the ears.

4. Using foam adhesive squares, attach the small pink hair piece to the coordinating shape on the combined unicorn head base. Place two small pieces of foam adhesive square to the black horn section.

5. Place a tab of glue on the backside bottom of the combined horn piece and secure to the coordinating shape on the combined unicorn head. The foam adhesive piece you placed on the last step will help to secure it on.

6. Insert Ghirardelli® chocolate square, other snack sized candy, or gift card into the pocket. Tuck the Unicorn’s hands into the slots in the center.

7. Use a foam adhesive square to attach the heart:)

Fox Snack Bag Topper

Fox Snack Bag Topper-JMRush

Approximate size: W 6.25” x H 8”

This snack bag topper features character arms and head that fold over a resealable plastic snack sized zipper bag. This design is perfect for Valentine’s Day or birthday parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. (I used double sided card stock:).

2. Fold the score lines. Glue the Fox face to the solid Fox face base. Glue the white tail portion to the coordinating shape on the Fox base.

3. Glue the Fox smile section to the combined Fox face. Using a foam adhesive square, attach the nose to the combined bear head.

4. Using a foam adhesive square, attach the nose to the combined Fox head.

5. Glue the combined Fox head to the topper base. Glue the heart to the center of the snack bag.

6. Apply hot glue to the inside of the topper base just underneath the score lines, where the arms fold over. (You want to make sure that the arms can still fold down.) 

7. -8.  Center and secure your open resealable plastic bag to the hot glue line. Make sure that only one side of the plastic bag is glued down so that you can still open it. I used a snack sized plastic bag (W 6.5” x H 4.25”) Fill with treats:)