Graduation Picture Frame 4X6 2018

Graduation Picture Frame 4X6 2018-JMRush

Frame Dimensions: W 4.5 x H 6.5”

The Graduation Picture Frame 2018 is self standing and can be used horizontally or vertically. This design is compatible with both 8X12 and 12X12 mats and folds flat for mailing.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) Be careful when removing the grad hat piece with the year cut out. It is delicate.
2. Glue the smaller mat to the top of the larger mat. Attach the grad hat with the year cut out to the solid grad hat piece ( I used foam adhesive squares for dimension:)
3. Apply glue to the back of the combined mat piece just along the very top. Secure to the front of the frame base. (Make sure the the score lines are at the bottom of the frame base)
4. Use foam adhesive squares to attach the combined grad hat to the center of the top of the combined frame pieces. ( This frame can also be used horizontally by glue the mat along the horizontal top instead of the vertical as directed above)
5. Insert picture by lifting the mat. The score lines on the frame base can be used to utilize the kick stand:)

Graduation Picture Frame 4X6 2016

Graduation Picture Frame 4X6 2016-JMRush

Frame Dimensions: W 4.5 x H 6.5”

The Graduation Picture Frame 2016 is self standing and can be used horizontally or vertically. This design is compatible with both 8X12 and 12X12 mats and folds flat for mailing. 

1. Cut design pieces. ( I used double sided card stock)
2. Glue the smaller mat to the top pf the larger mat. Glue the grad hat with the year cut out to the solid grad hat piece.
3. Apply glue to the back of the combined mat piece just along the very top. Secure to the front of the frame base. (Make sure the the score lines are at the bottom of the frame base)
4. Use a foam adhesive square to attach the combined grad hat to the center of the top of the combined frame pieces. ( This frame can also be used horizontally by glue the mat along the horizontal top instead of the vertical as directed above)
5. Insert picture by lifting the mat.
6. The score lines on the frame base can be used to utilize the kick stand:)

Puff Flower 4X6 Mailable Frame

Puff Flower 4X6 Mailable Frame-JMRush

Mailable Flat Frame size: W 4.75” X 6.5”

This self standing frame fits a 4X6 photo and can stand vertical or horizontally. This design is compatible with both 8X12 and 12X12 mats and the stand folds flat so it is perfect for mailing. 

1.Cut design pieces. (I used double sided card stock)

2.Glue the smaller Rectangular mat to the larger one.

3. Separate the kick stand leg from the frame base. (This frame can be used Horizontally or Vertically:)

4. Glue the top of the frame base to the combined mats.

5.-7. Glue the flower shapes together ( largest on bottom to smallest on top)

8. Using foam adhesive squares, attach the center circles to each flower.

9.-10. Using foam adhesive squares, attach the combined flowers to the front of your combined frame.

11. Insert picture.

12. Ta Da:)

Poinsettia 3D 4x6 Photo Frame

Poinsettia 3D 4x6 Photo Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This easy to construct, two piece frame can be used vertically or horizontally and features a fold out stand and a decorative poinsettia. This design is compatible with both 8X12 and 12X12 mats. Poinsettia flower and leaves can also be used separately.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut out design piece.

2. Insert the tabs of the frame base into the frame base slots.

3. 4. Align and center the pieces. On the backside. Apply glue to the inside of the tabs and secure into place.

5. Pre-fold all scored lines on the edges of the frame folding them inward toward the center. Fold all score lines on the flower pieces. For each set of the flowers- fold one in and one out.

6. Line up the points of the Largest flower set. Make sure you have one flower fold down and one up. Glue the center to secure it together.

7. Apply glue to the flower edges.

8. Secure the point pieces together working your way around the flower until all points are glued together. Repeat for the other two flower sets.

9. Attach a foam adhesive square to the center of the two largest flowers.

10. Attache the flower sections together staggering the points. Largest on bottom ascending to the smallest. Shape the petals of the flower as you like.

11. I used 4 small adhesive jewels in the center of the poinsettia . Curve the leaves as you like.

12.  Starting on the top edge of the frame base, apply hot glue to the very edge. 

13.  Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.

14. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.

15.-21. Repeat this steps for each of the frame sides. Be careful to only apply glue to the edge of each side so that the stand leg on the base of the frame will have mobility later and so  inserting your photo is easy:)

22. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.

23. Repeat for each tab.

24.Insert your photo by sliding it into place. The sides of the frame will lift up a bit to ease the photo insertion.

25. Use foam adhesive squares to attach the poinsettia and leaves onto your 3D frame:)

Lattice 3D 4X6 Frame

Lattice 3D 4x6 Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This frame has a intricate cut design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file (excluding your pictures;) This design requires a 12X12 cutting mat.

1. Cut out design piece.
2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later and so that inserting your photo is easy:)
4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
6. Repeat this steps for each of the frame sides.
7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
8. Repeat for each tab.

Pumpkin 3D 4X6 Frame

Pumpkin 3D 4x6 Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This Autumn themed frame has a intricate cut Pumpkin/leaf design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file (excluding your pictures;) This design requires a 12X12 cutting mat and contains a print and cut feature for the pumpkin and leaves. The pumpkin and leaves can also be used separately.

1. Cut out all design pieces.
2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later and so that inserting your photo is easy:)
4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
6. Repeat this steps for each of the frame sides.
7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
8. Repeat for each tab.
9. Place the print and cut Pumpkins and leaves on top of the base frame and glue into place.
10. (I used foam adhesive squares to adhere them into place on the frame to give them dimension. Happy Crafting:)

Fall Leaves 3D 4X6 Frame

Fall Leaves 3D 4x6 Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This Autumn themed frame has a intricate cut leaf design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file ( excluding your pictures;) This design requires a 12X12 cutting mat and contains a print and cut feature for the leaves. The leaves can also be used separately.