Mom Hawaiian Floral Card

Mom Hawaiian Floral Card-JMRush

Approximate Size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock and vellum paper for the circular window piece.
2. Flip the card base over and glue the vellum piece to the coordinating opening on the card. 
3. Glue the open circle piece over the vellum paper; centering it.
4. Flip the card base over. Glue the Mom design piece to the coordinating shape; centering the word Mom with the card base.
5. Glue the large floral base aligning with the coordinating shape on the card base.
6. Glue the green palm leaves in place.
7. Glue the medium floral base into place; aligning with the coordinating shapes on the combined card base.
8. Glue the smaller (2) hibiscus flowers and small leaves (2) to the coordinating shape on the combined base.

1. Glue the smaller pistil bases (2) to the smaller hibiscus flowers.
2. Glue the yellow pistils to the pistil bases.
3. Glue the last floral base to the coordinating shape on the card base.
4. Glue the last Hibiscus flower and larger leaves (2) to the coordinating shapes on the card base.
5. Glue the large pistil base in place.
6. Glue the yellow pistil to the coordinating shape.
7. your card should look like this:)

 

Hip Hip Hooray!Card- JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats and contains a gift card/money pocket.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock any glitter card stock)

2. Flip the card base over as shown. Glue the white square to the center panel and secure until dry.

3. Apply glue to the top panel around the words. Secure the glitter square pretty side down and secure until dry.

4. Fold score lines. Fold side tabs in toward the center. Apply glue to the side tabs on either side of the bottom panel. Fold the bottom panel toward toward the center panel and secure until dry. This will create a pocket.

5. Insert gift card or money.

6. Your card is complete:)

 

Gingerbread Man Gift Tag Ornament

Gingerbread Man Gift Tag Ornament- JMRush 

Approximate Tag size: H 4.25” X W 3.25”

This Gingerbread man design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Flip the gingerbread man base over and glue the white gingerbread man base to it; centering it. Glue the round gingerbread man head with holes to the coordinating solid head base. 
3. Flip the combined base over. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
4. Glue the two hand and two foot curvy pieces to the combined base. Glue the combined nose to the combined face.
5. Use foam adhesive squares to attach the combined head and combined candy pieces to the front of the card base.
6. I used enamel adhesive jewels to accentuate the eyes and finish with a ribbon:)

Joy Santa Gnome Card

Joy Santa Gnome Card- JMRush 

Approximate Card size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Glue the largest Gnome suit piece to the full solid gnome figure. Glue to hat base piece to the gnome head base. Glue the holly berries to the holly base. 
3. Glue the small Gnome suit piece to the combined full Gnome figure; aligning at the bottom center and edges. Glue the hat brim piece to the combined gnome head piece.
4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the nose/mustache to the combined head and the green wreath to the black wreath base.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. Glue the combined holly to the hat.
6. Use foam adhesive squares to attach the combined gnome head to the gnome body base. Glue the lettering to the coordinating shapes on the card base.
7. Use foam adhesive squares to attach the combined gnome to the front of the card. I used adhesive enamel jewels to decorate the wreath:)

Polar Bear Flip Gift Card

Polar Bear Flip Gift Card- JMRush 

Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
10. Ta Da!

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Motorcycle Card

Motorcycle Card-JMR

This design is compatible with both the 8x12 and 12x12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. (I used double sided cardstock for the motorcycle pieces and vellum paper for the circular head lamp piece)
2. Glue the red tank and red wheel hub to the coordinating shapes on the black motorcycle silhouette. Fold card base at the score lines.
3. Glue the dark gray pieces to the coordinating shapes on the motorcycle silhouette.
4. Glue the two round orange lights to the coordinating shapes on the motorcycle silhouette and the silver long bars into place. 
5. Glue the circle vellum piece to the  open circle (light silver) headlamp piece. Use foam adhesive squares to attach the long black tie into place.
6. Turn the combined motorcycle over and glue the combined vellum circle into place. (Vellum side down so that it shows on the pretty side)
7. Use foam adhesive squares to attach the motorcycle into place:)
8. Ta da!

Lamb Peek Pocket Card

 Lamb Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Flip the card base over and fold at score lines. Use foam adhesive squares to attach the hair with cut outs to the coordinating shape. Glue the eyes to the lamb face (with eye cutouts) and glue the hooves to the oval feet; aligning at the bottom.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket. Use foam adhesive squares to attach the combined hair to the lamb face.
4. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape. Use foam adhesive squares to attach the combined feet to the lamb base and the nose to the combined lamb face.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the lamb base to the coordinating shape on the front of the card.
7. Attach the combined lamb head to the lamb base using either foam adhesive squares or a wobble mechanism ( as shown:)

Chick Peek Pocket Card

 Chick Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
4. Image of pocket section.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the chick shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes to the circular chick head shape and attach the beak with a foam adhesive square.
8. Using foam adhesive squares or a wobble mechanism to attach the combined chick head shape to the coordinating shape on the front of the card:)

Bunny Peek Pocket Card

Bunny Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
3. Apply glue to the backside of the fringed grass. 
4. Attach to the solid rectangular shape.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the rabbit shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes, nose, and insides of the ears to the coordinating shapes of the rabbit shape on the front of the combined card base.
8. Using foam adhesive squares, attach the double circle muzzle shape to the coordinating shape on the combined rabbit :)

Motorcycle Light Up Card

Motorcycle Light Up Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file uses an LED light, copper tape, and a battery to produce the lighting of the motorcycle headlamp. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 Coming Soon:)

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

Supplies for this project:

Chibitronics white lights

Chibitronics copper tape

CR2025 Battery

Electronic cutting machine

Printer

Tombow mono liquid glue

Double sided card stock (multiple colors)

vellum paper

Foam adhesive squares

scissors

Loctite Super glue

Silhouette pick me up tool

Youtube Instructional Video Tutorial Link Below:

Ps- There are 3 vellum circles to this file. This video begins with only displaying two.

Need help with the print and cut feature?

 Short tutorial below:)

           

Valentines Bus Card

Valentines Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock.

2. Glue the smaller bus to the larger one. Fold the card base.

3. Glue the floral bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the three hearts; smallest on top:)

4. Glue the four solid circles ( two red and two white) to the inside of the open circles; centering them.

5. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the combined hearts to the center of the combined bus.

6. Use pieces of foam adhesive squares to attach the bottom silver bumper piece and side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. 

7. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it:)

Merry Card

Merry Card-JMR

Approximate Card size: 4.25” x 5.5” 

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used Double sided card stock.

2. Fold the card along score lines. Fold the leaves at the score marks. Glue the small “Merry” font to the larger “Merry” font; centering it.

3.- 5. Apply glue the bottom of the rounded end of the leaves and attach to the merry/leaf base. Glue the large round holly with cut out to the holly base. 

6. Attach the smaller round holly pieces to the holly base with foam adhesive squares.

7. Glue the combined holly to the Merry/leaf combined base. Using pieces of adhesive foam square, attach the combined merry to the coordinating shape on the merry/leaf base.

8. Finish with a ribbon:)