Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Robot Treat Egg Holder

Robot Treat Egg Holder -JMR

Approximate size: H 4.75” X W 5.5” X D 2.5”

This easy to construct robot treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the gray rectangle with eye cutouts to the coordinating black robot head base solid shape; centering it. Using foam adhesive squares; attach the smaller silver squares to the larger gray squares.
3. Glue two of the silver C shaped robot hands to the coordinating shape on the box base. Use foam adhesive squares to attach the silver robot head shape with eye and mouth cutouts to the combined robot head.
4. Glue the combined robot head and two of the ears to the box base. Use pieces of foam adhesive squares to attach the heart to the box base and one of the small gray circles to the antenna.
5. Flip the box base over. Fold the score lines inward. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
6. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.

7. This is what it should look like:)
8. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
9. Glue the full silver rectangle, small circle antenna, remaining two ears, and remaining two C shaped robot hands to the back of the box base.

10. Flip robot over and attach the combined square feet to the front of the box base using foam adhesive squares. I added adhesive enamel jewels to enhance the eyes and a kinder egg.

Alien Treat Egg Holder

Alien Treat Egg Holder -JMR

Approximate size: H 5” X W 2.5” X D 2.5”

This easy to construct alien treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the alien eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the Green half alien face with cut outs to the white half alien face with cute outs and teeth; centering and aligning at the top.
3. Ignore this image- This image shows the box base and full figure flipped over. Do NOT glue the full figure to the box base at this point. I discovered during assembly that it is easier to glue it onto the back after assembly. This tutorial shows it glued into place. My mistake. 
4. Using foam adhesive squares, attach the full alien head to the cording shape on the front of the box base.
5. Glue the combined eyes and pink inside of the mouth into place.
6. Using pieces of foam adhesive squares, attach the hands, combined half face, and antennas to the coordinating shapes on the box base.
7. This is what it should look like:)
8. Flip the box base over. Fold the score lines inward.

1. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
2. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.
3. Image of tucking the tab.
4. Image of tucking the tab.
5. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
6. This is what it should look like:)

 

Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.

 

Mom Hawaiian Floral Card

Mom Hawaiian Floral Card-JMRush

Approximate Size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock and vellum paper for the circular window piece.
2. Flip the card base over and glue the vellum piece to the coordinating opening on the card. 
3. Glue the open circle piece over the vellum paper; centering it.
4. Flip the card base over. Glue the Mom design piece to the coordinating shape; centering the word Mom with the card base.
5. Glue the large floral base aligning with the coordinating shape on the card base.
6. Glue the green palm leaves in place.
7. Glue the medium floral base into place; aligning with the coordinating shapes on the combined card base.
8. Glue the smaller (2) hibiscus flowers and small leaves (2) to the coordinating shape on the combined base.

1. Glue the smaller pistil bases (2) to the smaller hibiscus flowers.
2. Glue the yellow pistils to the pistil bases.
3. Glue the last floral base to the coordinating shape on the card base.
4. Glue the last Hibiscus flower and larger leaves (2) to the coordinating shapes on the card base.
5. Glue the large pistil base in place.
6. Glue the yellow pistil to the coordinating shape.
7. your card should look like this:)

 

Black Cat Open Mouth Treat Box

Black Cat Open Mouth Treat Box-JMRush

Approximate Size: W 5” x D 1.25”x H 5.5”

Approximate Box size: W 2.5” x D 1 x H 4” 

This box opens by lifting the character’s head to to expose the opening to the treat box. This simple to construct design would be perfect to hold your goodies for Halloween or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the box and Mouth base at the score lines.

3. Glue the pink mouth piece (with holes) to the coordinating shape on the mouth base;aligning at the inner oval cut out shape.

4. Use pieces of foam adhesive squares to attach the teeth shapes to the coordinating shapes on the combined mouth base.

5.  Glue the two tiny oval white pieces to the coordinating shapes on the eyes. This is what it should look like:)

6. Flip the mouth base top over, like so. Glue the Cat head to the coordinating shape; aligning at the top of the ears.

7. I used an orange marker on the edges of the cat eyes. Glue the cat eyes into place.

8. Place the Cat nose on the cat face to find placement and then remove.

9. Cut thread ( approximately three strands of 4inches).

10. Attach the threads with glue to the area you picked to place the Cat nose. Allow to dry.

11. Using a foam adhesive square, place the Cat nose on top of the threads.

12. I used adhesive jewels to accent the eyes.

13. Apply glue to the small vertical side tab at the left side of the bottom of the box base.

14. Secure the small vertical side tab to the 1 inch (width) rectangles just above. 

15. Apply glue to the very left vertical tab, the horizontal tab, and the side tab on the bottom right and attach the side and bottom of the base…wrapping it crating a box.

16. This is what it should look like:)

17. Tuck the tab into the slot on the top.

18. Flip the box base over and apply glue to the area just outside the oval cut out.

 19. Attach the combined Cat head; centering it around the cut out oval shape and allow to dry.

20. I finished by adding a ribbon and filling with fun sized candies.

Winter Gnome Hug Gift Card Holder

Winter Gnome Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.5” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock)

2. Fold the card along score lines. Glue the black belt into place right above the first line of horizontal score lines and center it.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold square belt buckle to the center of the belt.

4.Glue the coordinating hat to the hat shape on the white head/beard piece.

5.  Insert gift card. Glue the combined head piece to the card base; aligning the beard along the edges of the top the card base.

6. Glue the hat trim piece to the combined face. Curl the green holly leaves as you like. 

7. Using foam adhesive squares attach the mustache to the combined beard/Head piece. 

8. Using a piece of foam adhesive square, attach the nose to the mustache. Glue the little red holly to the coordinating shape on the holly leaves.

9.Flip the card over. Glue the other red hat to the coordinating shape. Glue the hands into place.

10. Glue the white trim pieces just above the hands on each side. 

11. I finished with enamel jewels to accentuate the holly and a ribbon:)

( I used markers to color the enamel jewels the color I wanted:)

12.  Use a piece of foam adhesive square to attach the combined holly to the hat. 

 

Winter Squirrel Hug Gift Card Holder

Winter Squirrel Hug Gift Card Holder

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

Approximate Card size: 4” x 6.25” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. (I used double sided cardstock for the card base)

2. Fold the card along score lines. Glue the face piece with holes to the coordinating solid face shape (black). Glue the white mitten edges to the outer straight edge of the mittens.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Insert gift card. 

5. Glue the beige face (with cutouts)to the combined face; aligning so that the cutouts align with the cutouts on the combined face. Glue the hat to the combined face; aligning at the top of the face.

6. Glue the hat trim piece to the combined face and attach the nose with a piece of foam adhesive square.

7. Using foam adhesive squares attach the combined face to the gift card holder base. Separate the fringe on the two pieces of scarf.

8. Glue the large scarf base just under the chin of the combined face on the card base.

9. Glue the medium sized scarf piece to the coordinating shape on the lower scarf.

10.Using a foam adhesive square, attach the smallest scarf piece to the coordinating shape on the combined scarf.

11. Flip the card base over. Glue the back of the hat to the card base; aligning at the top and sides. Glue the combined mittens into place.

12. Using foam adhesive squares, attach the hat pom pom and the tail to the backside.

13. Flip the card over. Tuck the hands into the slots on the front. 

14. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Lion Basket

Lion Basket-JMR Approximate Completed Design size: W 5.25” x D 3” x H 6” (including handle) Approximate Box Dimensions: W 3” X D 2.5” X H 2.5” 

This cute Lion Basket is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

 You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Flip the basket base over as shown and fold score lines on the basket base.  Glue the Lion face with eye holes to the solid lion face. Glue the solid black back paws to the solid yellow paws; centering them.

3. Apply glue to the two top tabs on the basket base and attach to the center box.

4. Repeat for the lower two tabs; creating a box.

5. Your box should look like this.

6. Attach the two mane pieces together with a foam adhesive square. Attach the nose to the muzzle piece and the top of the tail to the tail base with a foam adhesive square.

7. Use foam adhesives squares to attach the combined mane to the center of the lion face on the box base. Glue the paw prints to the combined paw prints. Use foam adhesives squares to attach the combined muzzle to the combined lion head.

8. Use foam adhesive squares to attach the combined lion head to the combined mane on the box base.

9. Turning the box base around, Attach the combined paws and combined tail with foam adhesive squares.

10. Insert the handle into the slots on either side of the box base.

11. -12. I used enamel adhesive jewels to accentuate the eyes and finished with a ribbon:)