Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.

 

Santa Handle Basket

Santa Handle Basket-JMR

Approximate size: W 4.5” x D 3” x H 5.5” (including handle)

Approximate box size: W 2.75” x D 2.25” x H 2.25”

This cute Santa Basket is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the white santa head to the coordinating beige santa head. Glue the beige hands to the coordinating white hands with ruffles.

3. Glue the combined santa head to the coordinating shape on the basket base. Glue the large hat piece to the coordinating shape on the combined basket base.

4. Using foam adhesive squares, attach the ruffle hat brim to the small hat piece and the black shoe heels to the shoe bases.

5. Glue the tiny black eye circles to the coordinating holes on the combined base. Attach the combined small hat piece to the combined base using foam adhesive squares.

6. Attach the eyebrows using pieces of foam adhesive squares. Attach the puff ball to the hat and  the nose to the mustache using foam adhesive squares.

7. I used adhesive jewels to accentuate the eyes.

8. Flip the base over as shown.

9. Apply glue to the two top tabs on the basket base and attach to the rounded section of the basket.

10. Repeat for the lower two tabs; creating a box.

11. This is what it should look like:)

12. Attach the combined hands to the front using foam adhesive squares.

13. Attach the combined shoes to the back using foam adhesive squares. Glue the belt buckle to the center of the handle.

14. Insert the handle to the slot on either side of the basket.

15. I added a ribbon to the handle:)

 

Lion Basket

Lion Basket-JMR Approximate Completed Design size: W 5.25” x D 3” x H 6” (including handle) Approximate Box Dimensions: W 3” X D 2.5” X H 2.5” 

This cute Lion Basket is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

 You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Flip the basket base over as shown and fold score lines on the basket base.  Glue the Lion face with eye holes to the solid lion face. Glue the solid black back paws to the solid yellow paws; centering them.

3. Apply glue to the two top tabs on the basket base and attach to the center box.

4. Repeat for the lower two tabs; creating a box.

5. Your box should look like this.

6. Attach the two mane pieces together with a foam adhesive square. Attach the nose to the muzzle piece and the top of the tail to the tail base with a foam adhesive square.

7. Use foam adhesives squares to attach the combined mane to the center of the lion face on the box base. Glue the paw prints to the combined paw prints. Use foam adhesives squares to attach the combined muzzle to the combined lion head.

8. Use foam adhesive squares to attach the combined lion head to the combined mane on the box base.

9. Turning the box base around, Attach the combined paws and combined tail with foam adhesive squares.

10. Insert the handle into the slots on either side of the box base.

11. -12. I used enamel adhesive jewels to accentuate the eyes and finished with a ribbon:)

Bear Flowers Basket

Bear Flowers Basket-JMR

Approximate size: W 4” x D 3” x H 5.25” (including handle)

This cute Bear Basket is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1 .Cut design pieces. (I used double sided card stock)

2. Flip the basket base over and fold score lines on the basket base. Use foam adhesives squares to attach the bear face to the solid bear face.

3. Use foam adhesives squares to attach the now to the combined bear face. Glue the paw prints to the solid paw print bases. Use foam adhesives squares to attach the smaller front paws to the larger front paws.

4. Apply glue to the two top tabs on the basket base and attach to the center box.

5. Repeat for the lower two tabs; creating a box. 

6. Attach foam adhesive squares to the back of the combined bear head and attach to the coordinating shape on the basket.

7. Use foam adhesives squares to attach the combined front paws to the front of the basket.

8. Flip the basket to the backside. Use foam adhesives squares to attach the combined paws and tail to the backside of the basket.

9. Insert the handle into the slots on either side of the basket base.

10. Curve the flower petals.

11. Glue the smaller petals to the second smallest petals;alternating petals. Glue the second largest petals to the largest petals;alternating petals.

12. Glue the petal sections together;alternating petals. Use adhesive jewels to accent the center of each combined flower.

13. Glue the two smaller flower groupings to the combined bear head.

14. Use foam adhesives squares to attach the combined large flower grouping to the combined bear head:)

Rainbow Heart Basket

Rainbow Heart Basket-JMR

This cute Rainbow Basket is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the colored rectangles to the rainbow base as shown. Fold score lines on the basket base.

3. Apply glue to the two top tabs on the basket base and attach to the center box.

4. Repeat for the lower two tabs; creating a box. 

5. Insert the combined rainbow into the slots on either side of the basket base.

6. Using foam adhesive squares, attach the largest heart to one side; aligning at the center of the basket base.

7. Using foam adhesive squares, attach two of the small hearts to either side of the large heart; aligning with the rainbow base.

8. Using foam adhesive squares, attach the middle sized heart. Repeat for the other side:)

German Shepherd Basket

German Shepherd Basket-JMRush

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 6.5” X D 2.5” including handle

This cute German Shepherd Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the Circular Medallion piece to the matching shape on the solid large face base. 

3.Glue the collar to the corresponding shape on the solid large face base ( I used black but included this piece in case you wanted a different colored collar:). 

4.Glue the face piece with open eyes/mouth to the combined face base.

5. Glue the narrow face piece to the combined face.

6.Glue the eyebrow face piece to the combined face.

7.Glue the white teeth to the combined face; aligning with the teeth below.

8. Curve the tongue piece and glue the top section to the combined face as shown (optional piece)

9. Glue the black nose/jaw piece. (Be sure to lift the tongue above the lower jaw section of this piece).

10. Attach the muzzle section with glue or foam adhesive squares.

11. Glue the nose on.

12. I used adhesive jewels to accentuate the eyes.

13. Glue the chest and bottom hair sections to the upper and lower sections of the basket base as shown. glue the smaller paws to the larger ones;centering them.

14. Glue the paws with cutouts to the combined paws.

15. Flip the basket base over and fold the score lines as shown.

16. Apply glue to the two top tabs and secure to the rounded section above.

17. Apply glue to the two bottom tabs and secure to the dog shape section below creating a box.

18. This is what it should look like:)

19. Using foam adhesive squares, attach the combined dog face to the corresponding shape of the combined basket; aligning at the side edges.

20. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

21. Insert the handle to the slot on either side of the basket.

22. I finished with a ribbon.

23. I used a thin marker to darken the edges of the muzzle piece as the white of the teeth were showing on the edges. This may not be necessary if creating a lighter colored german shepherd:)

White Long Hair Cat Handle Basket

White Long Hair Cat Handle Basket- JMRush 

Approximate Box size: H 2.25” X W 3” X D 2.25”

Approximate Design size: W 4.5” X H 5.5” including handle

This cute basket design is a perfect container for treats for your favorite feline, a small gift for your veterinarian, or a party favor. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. ( I used double sided card stock and glitter card stock of the eyes) (There are two pink noses in this file that is not shown in the tutorial and I adjusted the tail to be larger)
2. Glue the face piece with openings and a chin to the coordinating black solid cat face. I used a marker to color the outside edges of both large blue eyes. Glue them to the openings in the combined cat face. Glue the smaller solid paws and feet to the larger solid feet and paws.
3. Glue the fury bottom piece to the coordinating shape on the lower section of the basket base. Glue the other fury chest/head piece to the coordinating shape on the upper section of the basket base.
4. Glue the combined cat face to the cat face/chest piece. Glue the inner ears to the coordinating shape on the combined cat face. Using foam adhesive squares, attach the smaller tail to the coordinating shape on the larger tail. Glue the small oval white pieces to the cording shapes on the cat’s eyes.
5. Attach the smallest cat head (with cut outs) to the combined cat face using foam adhesive squares. Glue the nose into place.
6. Glue the combined cat to the coordinating shape on the basket. Use foam adhesive squares to attach the front paws to the top section of the basket and the back feet and tail to the bottom section.
7. I used enamel dots to accentuate the eyes.
8. Flip the combined basket over. Fold the basket base at the score lines.
9. Apply glue to the top two tabs on the basket base and secure to the Cat shape above.
10. Apply glue to the bottom two tabs on the basket base and secure to the rounded shape above creating a box.
11. Image of box completed.
12. Insert the handle on either side of the basket.
13. I added a ribbon.
14. Use three small lengths of thread and apply hot glue to one of the groups of ends. Attach the nose. Repeat for the other side:)
15. Image of the whiskers glued.
16. Hot glue the second pink nose on top of the whiskers:)

Black Cat Handle Basket

Black Cat Handle Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4.5” X H 5.5” including handle

This cute basket design is a perfect container for treats for your favorite feline, a small gift for your veterinarian, or a Halloween party favor. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. ( I used double sided card stock and glitter card stock of the eyes) 
2. Glue the fury bottom piece to the coordinating shape on the lower section of the basket base. Glue the other fury chest/head piece to the coordinating shape on the upper section of the basket base. I used a marker to color the outside edges of both large yellow eyes.
3. Glue the yellow eyes to the coordinating shape on the combined basket. Glue the smaller solid paws and feet to the larger solid feet and paws.
4. Attach the cat head ( black with cut outs) to the combined basket using foam adhesive squares.
5. Use a small piece of foam adhesive square to attach the nose. ( Hint- I use a black sharpie to color the edges of the white foam adhesive square so it’s not so noticeable:) Use foam adhesive squares to attach the front paws to the top section of the basket and the back feet and tail to the bottom section.
6. Flip the combined basket over. Fold the basket base at the score lines.
7. Apply glue to the top two tabs on the basket base and secure to the rounded shape above.
8. Apply glue to the bottom two tabs on the basket base and secure to the head shape above creating a box.
9. Insert the handle on either side of the basket.
10. Use three small lengths of thread and apply hot glue to one of the groups of ends. Attach underneath the nose. Repeat for the other side:)
11. I used enamel dots to accentuate the eyes and added a ribbon:)

Yellow Cat Handle Basket

Yellow Cat Handle Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 3.75” X H 5.5” including handle

This cute basket design is a perfect container for treats for your favorite feline or a small gift for your veterinarian. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1. Cut design pieces. ( I used double sided card stock) 
2. Glue the fury bottom piece to the coordinating shape on the lower section of the basket base. Glue the other fury chest piece to the coordinating shape on the upper section of the basket base. Glue the cat head shape with cut outs to the solid black cat head shape. Glue the smaller solid paws and feet to the larger solid feet and paws.
3. Glue the small rounded muzzle pieces to the muzzle base ( that has a coordinating shape plus a long vertical line). Glue the small triangular face markings to either side of the combined cat head. Glue the inner ear pieces to the combined cat head. Glue the collar and collar tag to the combined cat head. Glue the feet pieces that  have cutouts to the combined feet.
4. Glue the combined muzzle piece to the combined cat head. Use a small piece of foam adhesive square to attach the nose.
5. Use foam adhesive squares to attach the combined head to the coordinating shape on the basket base. use foam adhesive squares to attach the front paws to the basket.
6. Flip the combined basket over. Fold the basket base at the score lines. Apply glue to the top two tabs on the basket base and secure to the rounded shape above.
7. Apply glue to the bottom two tabs on the basket base and secure to the head shape above creating a box.
8. Use foam adhesive squares to attach the feet and the tail to the back of the basket.
9. Insert the handle on either side of the basket.
10. I used enamel dots to accentuate the eyes and added a ribbon.
11. Use three small lengths of thread and apply hot glue to one of the groups of ends. Attach underneath the nose. Repeat for the other side:)