Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.

 

Bulldog Pup Hug Gift Card Holder

Bulldog Pup Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided cardstock for the card base) There is a small tail not shown in this tutorial that can be attached to the backside of the gift card if desired:)

2. Fold the card along score lines. Glue the face piece with holes to the coordinating solid face shape (black). Glue the small chin (gray) to the coordinating shape on the solid combined face shape. Glue the small black circle eyes to the slightly larger brown circle eyes; aligning the holes.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Attach the muzzle and ear pieces to the combined solid face with foam adhesive squares. Glue the combined eyes to the larger white solid eyes.

5. Glue the combined eyes into place and attach the nose with a piece of foam adhesive square.

6. Glue the small eyebrow lines to the combined face.

7. Using foam adhesive squares attach the combined face to the gift card holder base.

8. The gift card can be inserted into the pocket of the card base and the hands tuck into the slots on the front. Finish with ribbon:) 

German Shepherd Basket

German Shepherd Basket-JMRush

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 6.5” X D 2.5” including handle

This cute German Shepherd Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the Circular Medallion piece to the matching shape on the solid large face base. 

3.Glue the collar to the corresponding shape on the solid large face base ( I used black but included this piece in case you wanted a different colored collar:). 

4.Glue the face piece with open eyes/mouth to the combined face base.

5. Glue the narrow face piece to the combined face.

6.Glue the eyebrow face piece to the combined face.

7.Glue the white teeth to the combined face; aligning with the teeth below.

8. Curve the tongue piece and glue the top section to the combined face as shown (optional piece)

9. Glue the black nose/jaw piece. (Be sure to lift the tongue above the lower jaw section of this piece).

10. Attach the muzzle section with glue or foam adhesive squares.

11. Glue the nose on.

12. I used adhesive jewels to accentuate the eyes.

13. Glue the chest and bottom hair sections to the upper and lower sections of the basket base as shown. glue the smaller paws to the larger ones;centering them.

14. Glue the paws with cutouts to the combined paws.

15. Flip the basket base over and fold the score lines as shown.

16. Apply glue to the two top tabs and secure to the rounded section above.

17. Apply glue to the two bottom tabs and secure to the dog shape section below creating a box.

18. This is what it should look like:)

19. Using foam adhesive squares, attach the combined dog face to the corresponding shape of the combined basket; aligning at the side edges.

20. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

21. Insert the handle to the slot on either side of the basket.

22. I finished with a ribbon.

23. I used a thin marker to darken the edges of the muzzle piece as the white of the teeth were showing on the edges. This may not be necessary if creating a lighter colored german shepherd:)

Labrador Double Sticky Note Holder

Labrador Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

4. This is what the backside will look like:)

5. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

6. Insert the second sticky note stack into the backside pocket.

7. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using foam adhesive squares, attach the lab head piece with eye holes to the solid dog base.

8. Curve the small dog tongue as you like. Using foam adhesive squares, attach the black nose to the muzzle piece and the ears to the coordinating shapes on the combined dog. Glue the tongue by sliding it underneath the open section of the combined dog. 

9.Use a piece of foam adhesive square to attach the nose to the combined muzzle. I glued the top tips of the ears down to the combined dog base and used adhesive jewels to accent the eyes.

10. Insert a pen and finish with a ribbon:)

Schnauzer Double Sticky Note Holder

Schnauzer Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown (pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Fold the bottom score line back. Fold the side tab score lines toward the back.

4. I flipped the base over on this image so that you can see the folds on the bottom section. Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

5. This is what the backside will look like:)

6. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

7. Insert the second sticky note stack into the backside pocket.

8. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Glue the red collar piece to the solid dog base.

9. Glue the small round dog tag to the combined dog base at it’s coordinating spot;centering it. Glue the dog face with eye cutouts to the combined dog base;centering it.

10. Curve the small dog tongue as you like. Using foam adhesive squares, attach the small white muzzle to the larger gray muzzle;centering it. Glue the tongue under the white muzzle by sliding it underneath. Use a piece of foam adhesive square to attach the nose to the combined muzzle.

11. Use pieces of foam adhesive squares to attach the combined muzzle to the combined dog base and the ears to their coordinating shapes on the combined dog base. Glue the eyebrow to the combined dog; aligning the edges with the coordinating shapes on the combined dog base. 

12. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Pug Dog Basket

Pug Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 3.75” including handle

This cute Pug Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock. (The dog basket base will be slightly different then what is shown at the beginning of this tutorial- adjustments were made:)
2. Flip the basket base head side down. Fold the basket base at the score lines. Glue the light colored round eye pieces (2) to the back of the black dog eyes/face piece with cutouts.  Glue the black paw prints to the back of the brown paw prints with cut outs; centering them. Glue the small black nose to the gray muzzle piece; aligning the nostril holes.
3. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the solid brown paw print pieces to the back of the combined paw prints.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box.
5. Use a foam adhesive square to attach the ears to the coordinating shapes on the solid large dog face shape. Glue the muzzle and chin piece to the combined black eye/face piece. Use foam adhesive squares to attach the combined dog face to the solid large dog face shape. Apply glue to the tops of the eyebrows and secure down to the first layer. Apply glue to the top tips of the ears and secure to the first layer: this is just to add dimension.
6. Use foam adhesive squares to attach the combined dog face to the front of the basket base; aligning at the top edges. Use a foam adhesive square to attach the front feet.
7. I placed a bow under the dog’s chin.
8. Turn the basket to the backside and attach the tail piece with a foam adhesive square; centering it. Use foam adhesive squares to attach the combined paws into place:)
9. Insert the handle piece into the slots on each side of the combined basket. 
10. Ta da:)

Labrador Retriever Dog Basket

Labrador Retriever Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4” including handle

This cute Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Flip the basket base as shown. Fold the basket base at the score lines. Glue the black paw prints to the slightly larger paw prints; centering them. Glue the face piece with eye cut outs to the larger face piece. Attach the nose to the muzzle piece with a foam adhesive square.
3. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the light colored paw print pieces with cut outs to the combined paw prints. Using foam adhesive squares; attach the combined nose/ small muzzle piece to the combined dog face. Curve the dog tongue as you like.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. Glue the tongue into place (optional). 
5. Glue one of the two fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the combined head and front paws to the front of the basket base.
6. On the backside: Glue the last fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the tail and back combined paws to the back of the basket.
7. Insert the handle piece into the slots on each side of the combined basket.
8. I used adhesive enamel dots to accentuate the eyes and collar and finished with a ribbon:)

Westie Dog Basket

Westie Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4.5” including handle

This cute Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the black paw prints to the slightly larger paw prints; centering them. Glue the face piece with eyes and ear cut outs to the larger face piece. Glue the two matching chest/bottom piece so that the straight edge aligns with the score lines in the center square of the basket base; one above and one below the center square.
3. Flip the basket base as shown. Fold the basket base at the score lines. Glue the light colored paw print pieces with cut outs to the combined paw prints. Using foam adhesive squares; attach the nose to the small muzzle piece and secure the larger muzzle piece to the combined dog face.
4. Using foam adhesive squares; attach the combined nose/small muzzle to the coordinating shape of the combined dog face.
5. Apply glue to the top two tabs and secure to the rounded backside piece just above.
6. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. Glue the combined dog face to the basket base; aligning with the coordinating shapes and at the top. Use foam adhesive squares to attach the two front paws.
7. Use a foam adhesive square to attach the tail and combined paws to the backside section.
8. Insert the handle piece into the slots on each side of the combined basket.
9. I used adhesive enamel dots to accentuate the eyes and finished with a ribbon:)

Schnauzer Dog Basket

Schnauzer Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4” including handle

This cute Schnauzer Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the red collar and yellow circle tag to the coordinating shapes on the black dog silhouette. Glue one of the two light gray fur pieces to the front of the basket base; centering it and aligning at the score line on the full dog silhouette shape. Glue the black paw prints to the slightly larger gray paw prints; centering them. Glue the light gray muzzle piece to the gray dog face silhouette with eye cut outs; aligning the edges.
3. Flip the basket base as shown. Fold the basket base at the score lines. Glue the combined gray face piece with eye cut outs to the combined black dog silhouette piece; aligning at the top and edges. Glue the white paw print pieces with cut outs to the combined paw prints.
4. Apply glue to the top two tabs and secure to the rounded backside piece just above.
5. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. 
6. Use foam adhesive squares to attach the combined dog face to the coordinating shape on the basket base.
   
7. Use foam adhesive squares to attach the small muzzle piece to the combined face. Use foam adhesive squares to attach the front two paws to the front of the basket base.
8. Use small pieces of foam adhesive squares to attach the eyebrows. Glue the nose into place on the combined face.
9. Curve the tongue as you like. Apply glue to the top and secure just underneath the small muzzle piece (optional). I used adhesive jewels to accentuate the eyes.
10. Turn the basket to the back side. Glue the second fur piece to the center of the dog backside; center and align at the bottom.
11. Attach the tail and combined back paws to the dog backside using foam adhesive squares.
12. Insert the handle piece into the slots on each side of the combined basket. 
13. I finished with a ribbon:)

Pomeranian Dog Basket

Pomeranian Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 3.75” including handle

This cute Pomeranian Dog Basket is a perfect gift container for dog lovers or for dog treats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Fold the basket base at the score lines. Glue the light colored face/chest piece t to the front dog silhouette; aligning at the side edge detail on either side. Glue the black paw prints to the slightly larger brown paw prints; centering them. Glue the face piece with eye,nose, and mouth cut outs to the smaller black eye, nose, mouth piece; aligning at the bottom and centering the eyes.
3. Flip the basket base head down. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the light colored paw print pieces with cut outs to the combined paw prints. Use foam adhesive squares to attach the small muzzle piece and the nose into place on the combined face.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. Attach the small tail piece to the larger one using foam adhesive squares; aligning at the top and sides. Apply foam adhesive squares to the back of the combined face over the cutout areas and secure to the front of the combined dog silhouette.
5. Glue the collar into place on the front of the combined dog silhouette. Use a foam adhesive square to attach the combined tail to the backside section.
6. Glue the combined dog silhouette to the front of the basket base; aligning edges. Curve the top notch and the ears forward. ( the top of the design does not align. This is designed to give dimension to the dog) Glue the inside of the ears to the coordinating shapes on the front of the combined basket. Use a foam adhesive square to attach the front feet.
7. Insert the handle piece into the slots on each side of the combined basket. 
8. Turn the basket to the backside and glue the combined backside piece into place; centering and aligning at the bottom. Use foam adhesive squares to attach the combined paws into place:)
9. I used adhesive enamel dots to accentuate the eyes and collar and finished with a ribbon:)