Lamb Peek Pocket Card

 Lamb Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Flip the card base over and fold at score lines. Use foam adhesive squares to attach the hair with cut outs to the coordinating shape. Glue the eyes to the lamb face (with eye cutouts) and glue the hooves to the oval feet; aligning at the bottom.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket. Use foam adhesive squares to attach the combined hair to the lamb face.
4. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape. Use foam adhesive squares to attach the combined feet to the lamb base and the nose to the combined lamb face.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the lamb base to the coordinating shape on the front of the card.
7. Attach the combined lamb head to the lamb base using either foam adhesive squares or a wobble mechanism ( as shown:)

Chick Peek Pocket Card

 Chick Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
4. Image of pocket section.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the chick shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes to the circular chick head shape and attach the beak with a foam adhesive square.
8. Using foam adhesive squares or a wobble mechanism to attach the combined chick head shape to the coordinating shape on the front of the card:)

Bunny Peek Pocket Card

Bunny Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
3. Apply glue to the backside of the fringed grass. 
4. Attach to the solid rectangular shape.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the rabbit shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes, nose, and insides of the ears to the coordinating shapes of the rabbit shape on the front of the combined card base.
8. Using foam adhesive squares, attach the double circle muzzle shape to the coordinating shape on the combined rabbit :)

Unicorn Candy Pocket

Unicorn Candy Pocket-JMR

Approximate size: W 3.75” X H 7.25”

Approximate Pocket size: W 2.5” X H 3.25”

The Unicorn Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, a gift card, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the tabs on the unicorn base. Apply glue to the tabs. Fold forward and secure to the unicorn shape of the base. Glue the black unicorn face to the large pink unicorn head with a mane; aligning at the ears. Glue the unicorn horn with cutouts to it’s matching solid base.

3. Use foam adhesive squares to attach the tail to the bottom of the unicorn base and the unicorn face with cutouts to the combined unicorn head; aligning at the ears.

4. Using foam adhesive squares, attach the small pink hair piece to the coordinating shape on the combined unicorn head base. Place two small pieces of foam adhesive square to the black horn section.

5. Place a tab of glue on the backside bottom of the combined horn piece and secure to the coordinating shape on the combined unicorn head. The foam adhesive piece you placed on the last step will help to secure it on.

6. Insert Ghirardelli® chocolate square, other snack sized candy, or gift card into the pocket. Tuck the Unicorn’s hands into the slots in the center.

7. Use a foam adhesive square to attach the heart:)

Foxy Hug Candy Pocket

Foxy Hug Candy Pocket- JMRush 

Approximate size: W 3.75” X H 6.25”

Approximate Pocket size: W 2.5” X H 3.25”

The Fox Hug Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the tabs on the Fox base. Apply glue to the tabs. Fold forward and secure to the Fox shape of the base. Glue the Fox face to the solid Fox face base. Glue the white tail portion to the coordinating tail shape.

3. Glue the Fox smile section to the combined Fox face.

4. Using a foam adhesive square, attach the nose to the combined fox head. Glue the combine fox head to the coordinating shape on the base.

5. Insert Ghirardelli® chocolate square or other snack sized candy.

6. Tuck the fox’s hands into the slots in the center.

7. Tuck the fox’s hands into the slots in the center. Glue the combined tail into place. Use a foam adhesive square to attach the heart:)

Happy Birthday Flower Gift Card Pocket

Happy Birthday Flower Gift Card Pocket- JMRush 

Approximate Card size: W 5.50” X H 4.25”

This design has an inside pocket that fits most gift cards is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (I used double sided card stock on the flower petals)

2. Fold the card base at the score lines. Glue the smaller text to the to the larger one;centering it. Curve the flower petals as you like.

3. Apply glue to the two small tabs on the card base and secure to the panel above.

4. Glue the centers of the two smaller flowers together; alternating petals and with the smallest flower on top. Glue the centers of the two larger flowers together; alternating petals and with the smallest flower on top.

5.  Insert gift card. Glue the centers of the two flower grouping together; alternating petals and with the smaller grouping on top.

6. Attach with the words to the front of the card base with small pieces of foam adhesive squares. Glue the flower into place and finish with a small adhesive jewel in the center of the flower:)

Rose Pocket Gift Car

Rose Pocket Gift Card-JMRush

Approximate Size: W 7.25” X H 3.75”

This design has a sliding compartment that is sized to hold American paper currency or most gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the score lines on the two card bases.  (There is a enlarged photo below to assist in folding the card bases. Green lines fold down. Red folds up. The lower card base if turned so that the point is pointing up instead of down.) Glue the detailed flower to it’s coordinating shape solid base. Curve the leaves as you like.
3. Apply glue to the side tabs on the lower card base and fold the top section to them.
4. Apply glue to the side tabs on the upper card base and secure to the upper rectangular panel.
5. Apply glue to the lower section on either side ( where my fingers are pointing) and attach to the lower section. 
6. Apply glue to the top section of the upper card base and secure the triangular piece to it; aligning at the top of the card. Glue the center point of the leaves together.
7. Use a foam adhesive square to attach the combined leaves to the center of the top combined card base.
8. Insert cash or a gift card. Attach the combined flower with a foam adhesive square. Insert the top card base into the lower card base:)

Graduation Hat Pocket Gift Card

Graduation Hat Pocket Gift Card-JMRush

Approximate Size: W 7.25” X H 3.75”

This design has a sliding compartment that is sized to hold American paper currency or most gift cards and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

1. Cut design pieces. I used double sided card stock.
2. Fold the score lines on the two card bases.  (There is a enlarged photo below to assist in folding the card bases. Green lines fold down. Red folds up. The lower card base if turned so that the point is pointing up instead of down.) Glue the thinner word to the thicker word base. Glue the small oval to the larger oval base. Glue the smaller hat pieces to their larger coordinating shapes. ( There is a small tab in the center of the smaller top hat piece that can be used to secure a real tassel or thread if you prefer. Make sure this tab is up and not glued down if you decide to not use the tassel piece provided) Glue the side banner pieces (2) to the coordinating shape on the full banner. Glue the smaller curved banner piece to it’s coordinating larger shape.
3. Apply glue to the side tabs on the lower card base and fold the bottom section to them.
4. Apply glue to the side tabs on the upper card base and secure to the upper rectangular panel.
5. This is what it should look like.
6. Push down on the top of the upper card base and crease the folds.
7. Apply glue to the top section of the upper card base and secure the combined top hat piece to it; aligning at the top of the card.
8. Glue the bottom combined hat piece to the lower card base at the coordinating “v” shape. Glue the combined word to the combined curved banner piece.

9.  Use foam adhesive on the center backside of the combined curved banner and secure to the coordinating shape on the combined full banner piece. (You can glue the side edges down to the combined full banner if you want a more rounded appearance). Using a thin round dowel, wrap the tassel piece around to the backside.

10.   Apply glue to the very top to secure the tassel piece

11.  Apply glue to the center of the combined top hat. Secure the oval shape of the tassel to it. ( You can attach a real tassel to the tab if not using the tassel provided)

12.  Glue the combined small oval piece on top of the oval shape of the tassel.

13.  This is what it should look like:)

14.  Apply glue to the lower section on either side ( where my fingers are pointing) and attach to the lower section.

15.  Insert a gift card or money. The top section will flex.

16.  Insert the upper combined card base into the lower combined card base.

17.  Glue the combined banner to the front of the lower combined card base.

Rabbit Candy Pocket

Rabbit Candy Pocket- JMRush 

Approximate size: W 5” X H 7.5

Approximate Pocket size: W 3” X H 4”

The Rabbit Candy Pocket has a open center section that is perfect for holding snack sized candies for classroom parties, birthday party treats, or for Easter. This file can also hold a standard sized gift card and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock)

2. Glue the rabbit head with cut outs to it’s matching solid base. Fold the tabs on the Rabbit pocket piece. Apply glue to the tabs. 

3. Fold forward and secure to the upper shape of the pocket.  Glue the inner ear pieces to the coordinating shape on the combined rabbit head.

4. Use foam adhesive squares to attach the pocket piece to the rabbit base with legs; aligning at the bottom and matching up the curves of the shapes.

5. Apply glue to the top section of the combined rabbit body. Center and secure the top of the rabbit; aligning to the coordinating shape of the rabbit’s body.

6. Cut three sections of thread and glue their centers to the combined rabbit head’s nose.

7. Use a foam adhesive square to attach the nose to the combined rabbit’s head nose; covering the thread’s middle sections.

8. Attach the combined head to the combined rabbit base using foam adhesive squares and aligning the edges on each side. I finished with enamel dots to accentuate the eyes, a ribbon, and inserted a gift card and candy carrots in the pocket:)

Bunny Hug Candy Pocket

Bunny Hug Candy Pocket- JMRush 

Approximate size: W 4.25” X H 7”

Approximate Pocket size: W 2.5” X H 3.25”

The Bunny Hug Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Fold the tabs on the bunny card base. Apply glue to the tabs. Fold forward and secure to the bunny shape of the card base. 

3. Glue the Bunny head with cut outs to it’s matching solid base. Glue the slightly smaller oval feet to the larger oval feet.

4. Glue the feet with cut outs to their coordinating combined oval feet. Glue the inside of the ears to the coordinating shape on the combined head.

5. Attach the combined bunny head to the card base; using a foam adhesive squares.  

6. Tuck the bunny hands into the slots in the center. Attach foam adhesive squares to the bottom corners of the card base and secure the combined feet to each corner.

7.-8. Attach the heart with a foam adhesive square and place a foam adhesive square on the backside of the rounded tail piece and secure to the bunny’s backside. I finished with a ribbon, enamel dots to accentuate the eyes, and placed a Andes mint chocolate squares in the pocket:)

Dog Candy Pocket

Dog Candy Pocket- JMRush 

Approximate size: W 5” X H 6.5

Approximate Pocket size: W 3” X H 4”

The Dog Candy Pocket has a open center section that is perfect for holding snack sized candies for classroom parties, birthday party treats, or for Valentine’s Day. This file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1.Cut design pieces. ( I used double sided card stock)

2. Fold the tabs on the dog pocket piece. Apply glue to the tabs. 

3. Fold forward and secure to the upper shape of the pocket. Glue the dog head with cut outs to it’s matching solid base.

4. Curve the tongue ( this is an optional piece ) as you like:) Use foam adhesive squares to attach the coordinating ear shapes to the combined dog head.

5. (optional) Glue the tongue to the combined dog head; centering it and aligning it at the bottom.

6. Use foam adhesive squares to attach the muzzle piece ( centering around the nose shape) and nose to the combined dog head.

7. Use foam adhesive squares to attach the combined dog head to the coordinating shape on the head/back piece; aligning at the bottom. Use foam adhesive squares to attach the pocket piece to the dog base with legs and a tail; centering and aligning at the straight edge of the bottom.

8. Glue the combined dog head to the combined pocket base piece; aligning along the curved edges. I finished with enamel dots to accentuate the eyes, a ribbon, and inserted snack sized Laffy Taffy in the pocket:)

Penguin Hug Candy Pocket

Penguin Hug Candy Pocket- JMRush 

Approximate size: W 4.75” X H 6.5”

Approximate Pocket size: W 2.5” X H 3.25”

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used doubled sided card stock for the base.)

2. Fold the score lines on the pocket base. Glue the Penguin silhouette with eye and beak cut outs to the coordinating shape on the pocket base; aligning at the top.

3. Glue the hat into place; aligning at the top. Attach the puff ball and beak with a foam adhesive square.

4.-5. Apply glue to the side tabs on the pocket base. Fold forward and secure to the penguin shape of the pocket base.

6. Apply glue to the front of the combined pocket base on the top rectangular piece. Secure the bottom section of penguin to the glue on the rectangle; aligning at the top edge of the rectangle and centering it.

7.-8.Make sure that the cut lines on the oval shaped piece are open. ( I used a small dowel rod to lift up the center in between the two slots.)  Apply glue to the backside edges of this piece and secure to the front of the combined pocket base; aligning at the top edge and centering it. (Make sure the slots are not glued down)

9. Tuck the hands into the slots. Attach the heart with a foam adhesive square in the center between the hands. I finished by adding enamel dots to accentuate the eyes and placed a chocolate square in the pocket:)

Polar Bear Hug Candy Pocket

Polar Bear Hug Candy Pocket- JMRush 

Approximate size: W 4.25” X H 7”

Approximate Pocket size: W 2.5” X H 3.25”

The Polar Bear Hug Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the tabs on the bear pocket base. Apply glue to the tabs. Fold forward and secure to the bear shape of the pocket base. Glue the two paws and two feet without cutouts to their coordinating solid bases.

Glue the bear head with cut out eyes and ears to it’s matching solid base.

3. Glue the hat shape piece to the backside of the combined head. Use a foam adhesive square to attach the nose to the oval muzzle piece. 

4. Use a foam adhesive square to attach the puff ball to the coordinating shape on the hat piece. Place a foam adhesive square at the center of the backside of the hat trim piece. Place it in the center of the the combined bear head following the contour of the bear head. Glue the backside of th pointy ends of the hat trim piece to the combined bear head.

5. Use a foam adhesive square to attach the combined muzzle to the combined bear head.

6. Attach the combined bear head to the coordinating shape the pocket base with foam adhesive squares. Apply glue to the backside of the rectangular scarf piece. 

7. Secure the scarf piece to the combined pocket base over the combined bear head and aligning with the edges of the pocket base. Tuck the bear hands into the slots in the center. Use foam adhesive squares to attach the combined feet to each corner. Attach the heart with a foam adhesive square in the center between the hands.

8. I finished by adding enamel dots to accentuate the eyes and placed a chocolate square in the pocket:)