Love Birds Nest Cupcake Toppers

 Love Birds Nest Cupcake Toppers-JMRush

Approximate size Birds: H 3" X W 2.25”

Approximate size Birdcage: H 2.50" X W 1.50”

Approximate size Egg: H 2.50"  X W 1.75”

Approximate size Egg Nest: H 1.50"  X W 2.50”

Approximate size Flower Group: H 2.25"  X W 2.25”

Approximate size Single Flower: H 2.25"  X W 2.25”

These Print and Cut Cupcake Toppers have a backing that is sized for a toothpick to be inserted in the back and are compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Print the colored design and then cut the design. Cut the single colored base pieces.
2. Insert toothpicks into the single colored base pieces as shown.
3. Apply glue to the backside of one the base piece. Attach the coordinating shape aligning at the edges until secure.
4. Repeat for the remain pieces.
5. Image of the backside of a completed cupcake topper.
6. Finish with ribbon if you like:)

Birdcage Card

Birdcage Card-JMR

Approximate size: W 3” X H 5 3/8”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the card at the score lines. Use a foam adhesive squares to attach the birdcage with out outs to the front of the card base. Curve the flower petals and leaves as you like.

3. Apply glue to the backside of one of the flower shapes around the center hole. Attach to the center of one of the brown circles.

4. Apply glue to the backside of the matching flower shape and attach to the combined flower petal; alternating petal pattern.

5. Repeat for the other flower sets.

6. Glue the two smaller combined flowers to the front of the combined card base on either side.

7. Use a foam adhesive square to attach the larger combined flower in the center and slightly higher than the other two flowers. Apply glue to the backside bottom of the leaves and attach them underneath the flowers. Finish with a ribbon:)

Love Bird Sticker Sheet

Love Bird Sticker Sheet-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Also see coordinating Love Birds Baby shower
Invitation Set, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)

Lovebird Birdcage

Lovebird Birdcage-JMRush

Approximate size: W 4.50” X D 4.50” X H 7.5”

This five sided birdcage file contains a hanging lovebird perch and two lovebirds with heart cutout wings. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Line up the three birdcage panels (pretty side up). Apply glue to the long vertical side tab on the center birdcage panel and on the long vertical side tab on the single birdcage panel.
3. Glue each long vertical side tab to the the birdcage panel to the left. Tabs go underneath and mining up the straight edge at the bottom. 
4. Fold the score lines after the side tabs have dried.
5. Glue the two small circular hanger to each side of the large circular hanger base that has the perch and birds on it. 
6. Make sure the stems of these piece remain separate.
7.  Glue the lovebirds to the coordinating shapes on each side of the combined circular hanger base.
8. Flip the lantern base (pretty side down). Glue one of the stems of the combined circular hanger to the top of the third from the left birdcage panel. (The other stem will be glued inside the lantern later).
9. Apply glue to the bottom of the last long side tab on the right of the birdcage panels and secure to the other birdcage panel. This creates a closed pentagon shape.
10.  This is what it should look like.
11. Applying glue to one top tab at a time, begin to secure the top tabs to the inside of the next angled triangle. 
12. Picture of glueing the last triangle.
13.  This is what it should look like.
14.  Glue the other circular hanger tab to the top inside of the birdcage.
15. Picture of the circular hanger tabs glued.
16.  Fold the score line on the birdcage base.
17. Apply glue to the small tabs and secure to the insides of the rectangle to the left.
18.  This is what it will look like.
19.  Place the lantern top in it’s base.
20.  Finish with a ribbon.