Dahlia Flower Tea Light

Dahlia Flower Tea Light (Flameless)-JMRush

Approximate Dimensions: W 4” x D 4” X H 2”

This design is compatible with both 8X12 and 12X12 mats and is used with a flameless battery operated tea light candle. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1. Cut design pieces. (I used double sided card stock paper) I used a darker red color card stock for the 4 largest petal layers.
2. Curve the flower petals. Fold the tabs on the flower base.
3. Tuck the end tab into the slot creating a circular tube shape. Secure with a small dab of glue. Glue the 6 flower petal sections together; Largest on bottom to smallest on top and alternating petals. I did this by applying glue to the backside around the circumference of each flower layer.
5. Place the narrow circular ring pieces over the tube shape you just created.
6. Apply glue to the outside of one of the rows of tabs and secure to the narrow ring.
7. Apply glue to the tops of the ring and tabs.
8. Secure the thicker circular ring to the top.

9. Place a flameless votive candle inside the tube. Apply glue to the outside of the tabs and secure to the narrow ring.(repeating the steps above)

10. Apply glue to the tops of the ring and tabs. Secure the thicker circular ring to the top.

11. Fold the tabs of one of the two large flower petal piece down. Fold the other large flower’s tabs up.

12. Apply glue to the outside of the tabs on the downward tabs and combine with the other large center combined flower petal securing each of the tabs together.

13. Apply glue to the bottom center of the combined large flower piece and attach to the lantern base piece.

14. Apply glue to the center backside of the combined flower petal grouping and attach to the center of the combined lantern, alternating the petals. Apply light pressure until dry:)

Foxy Hug Candy Pocket

Foxy Hug Candy Pocket- JMRush 

Approximate size: W 3.75” X H 6.25”

Approximate Pocket size: W 2.5” X H 3.25”

The Fox Hug Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the tabs on the Fox base. Apply glue to the tabs. Fold forward and secure to the Fox shape of the base. Glue the Fox face to the solid Fox face base. Glue the white tail portion to the coordinating tail shape.

3. Glue the Fox smile section to the combined Fox face.

4. Using a foam adhesive square, attach the nose to the combined fox head. Glue the combine fox head to the coordinating shape on the base.

5. Insert Ghirardelli® chocolate square or other snack sized candy.

6. Tuck the fox’s hands into the slots in the center.

7. Tuck the fox’s hands into the slots in the center. Glue the combined tail into place. Use a foam adhesive square to attach the heart:)

Fox Snack Bag Topper

Fox Snack Bag Topper-JMRush

Approximate size: W 6.25” x H 8”

This snack bag topper features character arms and head that fold over a resealable plastic snack sized zipper bag. This design is perfect for Valentine’s Day or birthday parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. (I used double sided card stock:).

2. Fold the score lines. Glue the Fox face to the solid Fox face base. Glue the white tail portion to the coordinating shape on the Fox base.

3. Glue the Fox smile section to the combined Fox face. Using a foam adhesive square, attach the nose to the combined bear head.

4. Using a foam adhesive square, attach the nose to the combined Fox head.

5. Glue the combined Fox head to the topper base. Glue the heart to the center of the snack bag.

6. Apply hot glue to the inside of the topper base just underneath the score lines, where the arms fold over. (You want to make sure that the arms can still fold down.) 

7. -8.  Center and secure your open resealable plastic bag to the hot glue line. Make sure that only one side of the plastic bag is glued down so that you can still open it. I used a snack sized plastic bag (W 6.5” x H 4.25”) Fill with treats:)

Bear Snack Bag Topper

Bear Snack Bag Topper-JMRush

Approximate size: W 7” x H 6.25”

This snack bag topper features character arms and head that fold over a resealable plastic snack sized zipper bag. This design is perfect for Valentine’s Day or birthday parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock:).

2. Fold the score lines. Glue the bear face to the solid bear face base. 

3. Using a foam adhesive square, attach the nose to the combined bear head.

4. Glue the bear combined head to the topper base. Glue the heart to the center of the snack bag.

5. Apply hot glue to the inside of the topper base just underneath the score lines, where the arms fold over. (You want to make sure that the arms can still fold down.) 

6.  Center and secure your open resealable plastic bag to the hot glue line. Make sure that only one side of the plastic bag is glued down so that you can still open it. I used a snack sized plastic bag (W 6.5” x H 4.25”) Fill with treats:)

Flamingo Love Card

Flamingo Love Card-JMRush

Card size: H 4.25" X W 5.5”

This design has a peek through heart cut out between the Flamingos heads and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces.
2. Fold the card base at the score lines. Glue the pink Flamingo silhouettes to the full black Flamingo silhouette.
3. Use foam adhesive squares to attach the Flamingo wings to each Flamingo. Glue the combined Flamingo to the front center of the card base; aligning with the heart cutout:)

Bee Mine Handle Bag

Bee Mine Handle Bag-JMRush

Approximate Dimensions: W 5" X  H 4” X D 1.25”

This design can be filled with your favorite goodies for Valentine’s Day or for Birthdays and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com Coming Soon!

1.Cut design pieces. I used double sided card stock.

2. Pre-Fold all score lines. Glue the full white round circle to the back of the two eyes.

3. Apply glue to the tabs on the second section. Secure to the third section from the top. 

4. Apply glue to the tabs of the third section. Secure to the first section, creating a box.

5. Apply glue to the wings of section four. Secure to the inside of the wings of section five.

6. Glue the black stripes to the front of the box base. First stripe aligns with the bottom of the box. The second stripe aligns with at the bottom of the tab slot. Use foam adhesive squares to attach the small black circles to the antennas. Fold the wings at the score lines.

7. This image shows how the closure tab tucks into the base of the box.

8. Tuck the tabs of the handle into the slots on the top of the box base.

9. Use foam adhesive squares to attach the eyes to the front of the box and glue the mouth into place. Glue a ribbon to the center of the handle.

10. Glue the wings to the center top section of the back of the box:)

Heart Hanging Tea Light Lantern

Heart Hanging Tea Light Lantern-JMR

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com Coming Soon.

For a tutorial, please see: https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

Kiss Mint Box

Kiss Mint Box- JMRush 

Approximate size: W 1.75” X D 5/8” X H 3”

This file is designed to hold a standard Tic Tac™ container and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces.
2. Flip the box base over. Fold the card base at the score lines. Glue the bottom of the bottom tab and the lower two side tabs. Secure the panels to the right to the tabs.
3. Apply glue to the side tab and secure underneath the top panel.
4. Insert standard size Tic Tac™ box. This tutorial shows a mini Tic Tac™ box.
5. Insert the top flap into the slot on the box base.
6. Flip the box base over. Attach the lips to the box side without the flap/slot with foam adhesive squares.
7. I finished by hot glueing a ribbon and a jingle bell to the top:)