Mom Hawaiian Floral Card

Mom Hawaiian Floral Card-JMRush

Approximate Size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock and vellum paper for the circular window piece.
2. Flip the card base over and glue the vellum piece to the coordinating opening on the card. 
3. Glue the open circle piece over the vellum paper; centering it.
4. Flip the card base over. Glue the Mom design piece to the coordinating shape; centering the word Mom with the card base.
5. Glue the large floral base aligning with the coordinating shape on the card base.
6. Glue the green palm leaves in place.
7. Glue the medium floral base into place; aligning with the coordinating shapes on the combined card base.
8. Glue the smaller (2) hibiscus flowers and small leaves (2) to the coordinating shape on the combined base.

1. Glue the smaller pistil bases (2) to the smaller hibiscus flowers.
2. Glue the yellow pistils to the pistil bases.
3. Glue the last floral base to the coordinating shape on the card base.
4. Glue the last Hibiscus flower and larger leaves (2) to the coordinating shapes on the card base.
5. Glue the large pistil base in place.
6. Glue the yellow pistil to the coordinating shape.
7. your card should look like this:)

 

Labrador Retriever Dog Basket

Labrador Retriever Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4” including handle

This cute Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Flip the basket base as shown. Fold the basket base at the score lines. Glue the black paw prints to the slightly larger paw prints; centering them. Glue the face piece with eye cut outs to the larger face piece. Attach the nose to the muzzle piece with a foam adhesive square.
3. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the light colored paw print pieces with cut outs to the combined paw prints. Using foam adhesive squares; attach the combined nose/ small muzzle piece to the combined dog face. Curve the dog tongue as you like.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. Glue the tongue into place (optional). 
5. Glue one of the two fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the combined head and front paws to the front of the basket base.
6. On the backside: Glue the last fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the tail and back combined paws to the back of the basket.
7. Insert the handle piece into the slots on each side of the combined basket.
8. I used adhesive enamel dots to accentuate the eyes and collar and finished with a ribbon:)

Mom Flower Card

Mom Flower Card-JMRush

Approximate size: H 5.5” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. I used double sided card stock.
2. Fold the card base at the score lines and curve pieces as you like.
3. Apply glue to the backside center of the second largest group of flowers and attach to the center of the largest flower group above them; centering them and alternating the petals. Glue the backside center of the smallest flower group to the center of the third largest flower group; centering and alternating petals. Glue the half circle of leaves to the edge of the solid circle piece.
4. Apply glue to the backside center of the smaller combined flower sections and attach it to the center of the largest combined flower sections; alternating petals. Glue the combined leaf/circle piece to the full circle leaf piece; centering the circles.
5. Glue the combined flowers to the combined circle. Glue the word “mom” to the center of the combined circle.
6. Use a foam adhesive square to attach the combined circle piece to the front go the card base. I used enamel dots to accentuate the center of the flowers:)

Peony Flower

Peony Flower-JMRush

Approximate size: H 1.50” X W 3” X D 3.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Curve pieces as you like.
3. Apply glue to the backside center of the middle row of flowers and attach to the center of the slightly larger flowers to the left; centering them and alternating the petals. Glue the backside center of the smaller stamen section to the center of the larger one. Apply glue to the backside center of the smaller 4 petal flower section and attach to the larger 4 petal section; centering and alternating petals.
4. Apply glue to the backside center of the second to the largest combined flower section and attach it to the center of the largest combined flower section; alternating petals. Apply glue to the back center of the combined stamen and attach to the combined 4 petal section.
5. Apply glue to the back center of the combined 4 petal/stamen piece and attach to the center of the smaller combined flower grouping.
6. Apply glue to the back center of the combined 4 petal/stamen flower groping and attach to the center of the larger combined flower grouping; centering and alternating petals.
7. Use a foam adhesive square to attach the leaves.
8. Adjust the flower petals as you like:)

Crawling Baby Girl Bottom Card

Crawling Baby Girl Bottom Card- JMRush 

Approximate Card size: W 5.50” X H 4.25”

This cute ruffled baby bottom card can be used for baby shower invites, pregnancy/birth announcements, or for welcoming a new baby. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. ( I used double sided card stock) 

2. Fold the card base at the score lines. Glue the smaller feet to the larger feet bases; aligning on the top (heel) and big toe side of each foot. Glue the largest diaper piece to the coordinating shape of the full bottom piece; centering it ( make sure the little bump on the outside edges of the diaper piece is on the lower half) Fold the diaper ruffle pieces (3) at the score lines (first score line should be up, next one down etc…

3. Apply glue from the top to the middle of the elongated ovals on either end of the middle sized ruffle piece. Line up the largest ruffle piece just above the middle ruffle so there is one elongated oval hanging over the edge on either side. Attach the largest ruffle over the glue you just applied on the middle ruffle and secure.

4. Repeat for the the smallest ruffle -attaching the combined ruffle piece on top and creating a staggered pattern.

5. This is what it should look like.

6. Apply glue to the outside half of the top elongated oval.

7. Attach to the combined bottom piece at the top as shown, making sure the half elongated oval is within the diaper portion of the combined bottom piece. Allow glue to dry and then repeat for the other side.

8. Larger image of the angle of the attached half elongated oval of the combined ruffle piece. The tip is at the corner where the diaper and bottom piece meet.

9. This is what it should look like:)

10. Apply glue to the backside of the last diaper piece (scalloped bottom). Place it over the combined bottom/ruffle piece and align it at the top and center it. Make sure the sides align with the corner tip where the diaper and the ruffle piece meet. I applied pressure to the top edge until dry.

11. Glue the combined bottom piece to the front of the card base; aligning at the bottom.

12. Apply a foam adhesive square to the back heel section of each of the combined feet. Apply glue to the toe section of the backside of each of the combined feet. Attach each foot to the combined card base; aligning with the toe shapes of the card base.

13. Finish with a  ribbon:)

Art Deco Rose Card

Art Deco Rose Card-JMRush

Card size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock).

2. Fold the card at the score line. Apply glue to the backside of the geometric design and attach it to the front of the card base. Glue the black rose design to the red rose design with a open center. Glue the rose with a solid center to the solid rose base.

3.  Glue the two rose sections together aligning the patterns.

4.  Glue the leaf detail to it’s coordinating solid leaf base.

5. Curve the leaves as you like.

6. Use foam adhesive squares to attach the combined leaves and combined rose to the front of the card. Finish by adding adhesive jewels to each corner:)

Rose Pocket Gift Car

Rose Pocket Gift Card-JMRush

Approximate Size: W 7.25” X H 3.75”

This design has a sliding compartment that is sized to hold American paper currency or most gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the score lines on the two card bases.  (There is a enlarged photo below to assist in folding the card bases. Green lines fold down. Red folds up. The lower card base if turned so that the point is pointing up instead of down.) Glue the detailed flower to it’s coordinating shape solid base. Curve the leaves as you like.
3. Apply glue to the side tabs on the lower card base and fold the top section to them.
4. Apply glue to the side tabs on the upper card base and secure to the upper rectangular panel.
5. Apply glue to the lower section on either side ( where my fingers are pointing) and attach to the lower section. 
6. Apply glue to the top section of the upper card base and secure the triangular piece to it; aligning at the top of the card. Glue the center point of the leaves together.
7. Use a foam adhesive square to attach the combined leaves to the center of the top combined card base.
8. Insert cash or a gift card. Attach the combined flower with a foam adhesive square. Insert the top card base into the lower card base:)

Mom Tulips Card

Mom Tulips Card-JMRush

Approximate Size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (There are actually four “mom” script words in this file. You will only need three. The thinnest script is very delicate so I included one that is a bit thicker for the top layer:) - ( I also changed the color of the thinnest script to a darker blue paper so it shows up better)
2. Fold the card base. Glue the larger flower petal pieces to the coordinating shapes on the flower grouping pieces (2).  Glue the two largest “mom” scripts together.
3. Use pieces of foam adhesive squares to attach the middle single petals to the combined flower groupings. Glue the last “mom” script to the combined script.
4. Curve the leaves of the flower groupings as you like. Use a foam adhesive squares to attach the two flower grouping together.  Glue the front panel to the front of the card base. 
5. Place the combined flower grouping and the script to the front of the card to find placement.
6. I used foam adhesive squares on the top back section of the combined flower grouping and glue at the bottom. Attach to the front of the card base.
7. Glue the script to the front of the card base. I pressed on the bottom section of the script until it fully dried:)

Iris Tea Light (Flameless)

Iris Tea Light (Flameless)-JMRush

Approximate Dimensions: W 5” x D 5” X H 3.75”

This design is compatible with both 8X12 and 12X12 mats and when vellum paper is used, an opaque lantern effect is created. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (I used double sided card stock and vellum paper)
2. Match up the petal outline shapes with the coordinating vellum shape. Glue the coordinating vellum piece to the front of the outline flower. ( You can also cut out another outline flower piece if you would like each side of the vellum flower to have the outline detail:)
3. Fold the tabs of the tea light base ( long narrow strip with tabs). Tuck the end tab into the slot creating a circular tube shape. Apply a small dab of glue on the tab to hold in place. Apply a small dab of glue on the tab to hold in place.    
4. Place the two narrow circular ring pieces over the tube shape you just created. One toward the top and one toward the bottom.
5. Apply glue to the outside of one of the rows of tabs and secure to the narrow ring.
6. Image of step completed.
7. Repeat for the other set of tabs and circular ring. Image of step completed.
8. Apply glue to the tops of the ring and tabs on one side. Secure the thicker circular ring to the top.
9. Image of this step completed.
10. Flip the combined tube over. Place a flameless votive candle inside the tube. Apply glue to the tops of the ring and tabs. Secure the thicker circular ring to the top.
11. Curve the combined flower and leaves as you like. (I curved two of the leaves up and two down. I curved one set of the flower petals down and flipped the other set on it’s backside and then curved the petals up toward the center.)
12. Apply glue to the backside of the leaves at the points where they make contact with the tea light base and attach to the tea light base.
13. Apply glue to the bottom of the flower petals curved downward and secure to the tea light base.
14. Apply glue to the bottom of the flower petals curved upward and secure to the tea light base:)

1. 
   

Unicorn Hug Gift Card Holder

Unicorn Hug Gift Card Holder - JMRush

Approximate Size: W 4.25” x H 6.5”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Easter, Valentine’s Day, or for any occasion. This design is compatible with both 8X12 and 12X12 mats and fits most gift cards.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the Card Base at the score lines. Glue the Unicorn head with ear, eye, and nose cut outs to it’s coordinating solid base. Glue the unicorn horn with cut outs to it’s coordinating solid base. Glue the eyes with eyelashes to the circles with small circle cut outs; aligning at the small circle. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Curl the eyelashes on the combined eyes as you like:) Glue the combined eyes to the coordinating shapes on the combined Unicorn head; aligning the small circles.

5. Curl the hair and tail pieces as you like. Glue the small hair piece to the combined unicorn head. 

6. Use a foam adhesive square to attach the combined unicorn horn to the combined unicorn head; aligning at the top of the horn. Use foam adhesive squares to attach the combined Unicorn head to the coordinating shape on the card base.

7. Glue the hooves to the hoover shapes on the card base. Use foam adhesive squares to attach the large hair piece to the back of the card base.

8. Insert gift card.

9. Fold the gift card section upward and tuck the hooves into the slots on the front of the gift card section (card base).

10. Attach the tail to the back of the card base with a foam adhesive square.

11. Finish with a ribbon:)

Wisteria Gift Tag Card

Wisteria Gift Tag Card-JMRush

Approximate Card Size: H 4.75” x W 2.75”

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold the card at the score lines. Glue the large wisteria flower/leaf piece to the front of the gift tag.

3. Glue the stem/leaf piece to the coordination shape on the combined gift tag; centering it. Curve the single flower petals and single leaves.

4. Using foam adhesive squares, attach the largest flower shape to the coordinating shape on the combined gift tag. Glue the leaves into place.

5. Glue the two remaining large flower pieces together ( smaller of the two on top) Glue the center of the two upper curved single flower petals to the top of the last remaining flower section. 

6. Repeat for the two side petals; overlapping slightly.  Attach the combined large flower section to the front of the tag base using foam adhesive squares. 

7. I used foam adhesive squares to attach the final petal to the center of the top layer.

8. Use foam adhesive squares to attach the last combined flower layer to the top of the tag. Finish with a ribbon and a enamel dot:)

Tulip Gift Tag Card

Tulip Gift Tag Card-JMRush

Approximate Card Size: H 3” x W 2.75”

This design can be used as an alternative to a bow on a present or gift bag and is compatible with both 8X12 and 12X12 mats. 

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock) 

2. Fold the card base at the score lines. Curve the flower petals and leaf design.

3. Glue the Longest side of the long double petal to the center front of the largest petal grouping.  Fold the gift tag base at the score lines.

4. Glue the Last petal grouping to the center top of the bottom petal of the combined flower petals. Open your card and glue the scalloped piece on the bottom section of the card; centering it. ( Optional piece for writing in case you have a double sided colored card base:)

5. I used foam adhesive squares to attach the lower section of the flower petals to the upper section.

6. Center and glue the leaves to the front of the gift tag base.

7. Use foam adhesive squares to attach the combined tulip to the front of the gift tag base. I looped a ribbon through the top opening of the card to finish:)

Lily Gift Tag Card

 Lily Gift Tag Card-JMRush

Approximate Size with Lily W 3.75” x H 3.75”

Approximate Card Size: H 3” x W 2.75”

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

Written tutorial coming soon:)

1.Cut design pieces. (I used double sided card stock)

2.-3.-4. Curve the leaf pieces as you like. Place the flower petal section with a smaller center underneath the flower petal section with a circular shape. Center and tuck the top layer of petals under the bottom petals to join the flower sections.

5. Curve the Flower stamen combined piece so that all of the oval sections are on top. Curve the flower petals as you like.

6. Glue the stamen section to the center of the combined flower petals.

7. ( Optional piece for writing in case you have a double sided colored card base:)-Open your card and glue the scalloped piece on the bottom section of the card; centering it.

8. Glue the leaves into place on the front of the card.

9. Glue the combined lily to the front of the card.

10. I looped a ribbon through the top opening of the card to finish:)