Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Stitched Bird Hanging Decoration

Stitched Bird Hanging Decoration-JMRush

Approximate size: H4.50” X W6.75”

This cute hanging decoration is an easy to assemble project and coordinates with the love bird nest collection. This file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1. Cut the design pieces.
2. Use fishing line, twine, or ribbon to loop through the top holes of the bird shape with two holes in it. Tie the string at the top.
3. Apply glue to the backside of string bird piece (Both birds should be facing the same direction). Attach the coordinating shape aligning at the edges until secure.
4. Image of the backside.
5. I used an adhesive enamel dot to accentuate the eye.
6. Finish with ribbon if you like:)

Stitched Bird Baby Advice Book

Stitched Bird Baby Advice Book-JMRush

Approximate size: H 4.50” X W 6.75”

This cute baby advice book includes a front and back book cover and bird shaped newborn advice cards that coordinate with the love bird nest baby shower collection. The book covers can be joined with small book rings or ribbon. This file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1. Cut the design pieces. (You will need to cut the (beige) bird design with two holes multiple times as they are the advice cards.)
2. Glue the Bird design with stitch marks to the top of the coordinating solid bird silhouette;centering it. Glue the stitched wing to it’s coordinating solid wing base; centering it. Glue one of the bird advice cards (two holes) to the backside of the other solid bird;centering it.
3. Apply glue to the backside of the combined wing just on the rounded side. Apply an adhesive square to the other side and attach to the combined stitched bird; aligning at the feather tips. 
4. You can insert the book rings, ribbon, or twine into the back combined cover.
5. Use one of the bird advice cards and glue the backside of the combined stitched bird to it; centering it. Place the remaining bird advice cards on the book rings.
6. This is what it should look like:)
7. I finished by placing an adhesive dot for the eye and a ribbon.
8. The book rings can easily be opened to pass out the advice cards and reinserted once the cards are collected:)

Love Birds Nest Cupcake Toppers

 Love Birds Nest Cupcake Toppers-JMRush

Approximate size Birds: H 3" X W 2.25”

Approximate size Birdcage: H 2.50" X W 1.50”

Approximate size Egg: H 2.50"  X W 1.75”

Approximate size Egg Nest: H 1.50"  X W 2.50”

Approximate size Flower Group: H 2.25"  X W 2.25”

Approximate size Single Flower: H 2.25"  X W 2.25”

These Print and Cut Cupcake Toppers have a backing that is sized for a toothpick to be inserted in the back and are compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Print the colored design and then cut the design. Cut the single colored base pieces.
2. Insert toothpicks into the single colored base pieces as shown.
3. Apply glue to the backside of one the base piece. Attach the coordinating shape aligning at the edges until secure.
4. Repeat for the remain pieces.
5. Image of the backside of a completed cupcake topper.
6. Finish with ribbon if you like:)

Bird House Treat Box

Bird House Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top and is apart of the Love Bird baby shower collection. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold the bird house base at the score lines. Curve the flowers and leaves as you like.

3. Connect the two wing tabs on the bottom.

4.Fold in the small bottom tab.

5. Apply glue to the side tab and connect the side panel.

6. This is what it should look like:)

7. Apply glue to the bottom tabs and secure the last bottom panel; aligning the sides.

8. This is what it will look like:)

9. Push in the two top handle panels.

10. This is what it will look like:)

11. Apply glue to the backside of one of the flower shapes around the center hole. Attach to the center of one of the brown circles.

12. Apply glue to the backside of the matching flower shape and attach to the combined flower petal; alternating petal pattern.

13. Repeat for the other flower sets. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces.

14.-15. Attach the roof top pieces to the top of wither side; aligning with the coordinating edge of the bird house base. Attach the two smaller combined flowers to the front of the combined bird house base with foam adhesive squares. ( The images are out of order…sorry:)

16.-17-18. Use two foam adhesive squares ( on top of one another) to attach the larger combined flower in the center and slightly higher than the other two flowers. Apply glue to the backside bottom of the leaves and attach them underneath the flowers. The top opens and shuts easily so that you can fill with treats. Finish with a ribbon:)

Also see coordinating Love Birds Baby shower

Invitation, Book plate request cards, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)

Birdcage Card

Birdcage Card-JMR

Approximate size: W 3” X H 5 3/8”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the card at the score lines. Use a foam adhesive squares to attach the birdcage with out outs to the front of the card base. Curve the flower petals and leaves as you like.

3. Apply glue to the backside of one of the flower shapes around the center hole. Attach to the center of one of the brown circles.

4. Apply glue to the backside of the matching flower shape and attach to the combined flower petal; alternating petal pattern.

5. Repeat for the other flower sets.

6. Glue the two smaller combined flowers to the front of the combined card base on either side.

7. Use a foam adhesive square to attach the larger combined flower in the center and slightly higher than the other two flowers. Apply glue to the backside bottom of the leaves and attach them underneath the flowers. Finish with a ribbon:)

Love Bird Sticker Sheet

Love Bird Sticker Sheet-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Also see coordinating Love Birds Baby shower
Invitation Set, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)

Love Bird Girl

Love Bird Girl-JMR

Love Bird Boy-JMR

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Also see coordinating Love Birds Baby shower
Invitation Set, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)

1.Cut design pieces. ( I used double sided card stock)

2. Glue the wings to the bird shape with eye cut outs. Use a small piece of foam adhesive square to attach the beak.

3. Use a foam adhesive square to attach the combined bird image to the bird base. Glue the limb piece to the top of the combined piece.

4. Glue the bird’s feet on:)

Love Bird Egg Baby Shower Invitation Set

Love Bird Egg Baby Shower Invitation Set-JMR

This cute Love bird print and cut invitation set is perfect for baby showers. The set contains an Invitation (W 4” x H 5.5”), a storybook request card (W 4.25” x H 2.25”), and matching bookplate (W 4.25” x H 2.25”). This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Love Bird Egg Card

Love Bird Egg Card-JMR

Approximate size: W 4.25 x H 4.5”

This cute tri-panel love bird card opens from each side and is perfect for baby showers or for pregnancy announcements. This design is compatible with both 8X12 and 12X12 mats.

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Glue the heart shape to the center of the card base;centering it. Line up the girl and boy birds. Glue the tree libs to each bird making sure the limbs line up. Use foam adhesive squares to attach the wings to each bird.

3. Use a foam adhesive square to attach the egg; centering it. Attach the boy beak to the boy bird using a piece of foam adhesive square and glue the feet to each bird on top of the limbs.

4. Use a tiny piece of adhesive square to attach the small oval beak piece to the large beak base for the girl bird. Fold the score lines of the card base.

5. Glue the girl bird beak into place.

6. Use foam adhesive squares to attach the girl bird to the card base. 

7. Use foam adhesive squares to attach the boy bird to the card base.

8. I finished with a ribbon:)

Crawling Baby Girl Bottom Card

Crawling Baby Girl Bottom Card- JMRush 

Approximate Card size: W 5.50” X H 4.25”

This cute ruffled baby bottom card can be used for baby shower invites, pregnancy/birth announcements, or for welcoming a new baby. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. ( I used double sided card stock) 

2. Fold the card base at the score lines. Glue the smaller feet to the larger feet bases; aligning on the top (heel) and big toe side of each foot. Glue the largest diaper piece to the coordinating shape of the full bottom piece; centering it ( make sure the little bump on the outside edges of the diaper piece is on the lower half) Fold the diaper ruffle pieces (3) at the score lines (first score line should be up, next one down etc…

3. Apply glue from the top to the middle of the elongated ovals on either end of the middle sized ruffle piece. Line up the largest ruffle piece just above the middle ruffle so there is one elongated oval hanging over the edge on either side. Attach the largest ruffle over the glue you just applied on the middle ruffle and secure.

4. Repeat for the the smallest ruffle -attaching the combined ruffle piece on top and creating a staggered pattern.

5. This is what it should look like.

6. Apply glue to the outside half of the top elongated oval.

7. Attach to the combined bottom piece at the top as shown, making sure the half elongated oval is within the diaper portion of the combined bottom piece. Allow glue to dry and then repeat for the other side.

8. Larger image of the angle of the attached half elongated oval of the combined ruffle piece. The tip is at the corner where the diaper and bottom piece meet.

9. This is what it should look like:)

10. Apply glue to the backside of the last diaper piece (scalloped bottom). Place it over the combined bottom/ruffle piece and align it at the top and center it. Make sure the sides align with the corner tip where the diaper and the ruffle piece meet. I applied pressure to the top edge until dry.

11. Glue the combined bottom piece to the front of the card base; aligning at the bottom.

12. Apply a foam adhesive square to the back heel section of each of the combined feet. Apply glue to the toe section of the backside of each of the combined feet. Attach each foot to the combined card base; aligning with the toe shapes of the card base.

13. Finish with a  ribbon:)

Crawling Baby Boy Pacifier Basket

Crawling Baby Boy Pacifier Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 5” including handle

This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

Crawling Baby Boy Curly Hair Pacifier Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 5” including handle

This cute baby basket design is a perfect container for baby shower party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) (Some design pieces will differ from this tutorial as it is used for the multiple design files).

2. Fold the box base at the score lines. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the smaller pacifier base to the larger one ; centering it.  Glue the smaller pacifier ring to the larger one; centering it.

3. Glue the larger diaper to the coordinating shape on the box base. Glue the combined skin colored faces to the combined black/white face.

4. Glue the oval shape to the combined pacifier base (widest section horizontal). Apply glue to the top two tabs on the box base and secure to the shape above. Glue the eye, eyebrows, and hair into place on the combined face.

5. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box. Use a small piece of foam adhesive square to attach the small pacifier oval to the combined pacifier ring(widest section horizontal).

6. Attach the combined pacifier ring to the combined pacifier base with a small pieces of foam adhesive square. Glue the smaller diaper piece to the back outside of the box base; aligning at the top center.

7. Insert the handle into the side slots on the box.  Repeat for the other side. Use a foam adhesive square to attach the combined pacifier to the combined face. 

8. Use a foam adhesive square to attach the combined feet to the back of the box base.

9.-10. Use a foam adhesive square to attach the combined hands and face to the front of the box base. Finish with ribbons:)