Motorcycle Card

Motorcycle Card-JMR

This design is compatible with both the 8x12 and 12x12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. (I used double sided cardstock for the motorcycle pieces and vellum paper for the circular head lamp piece)
2. Glue the red tank and red wheel hub to the coordinating shapes on the black motorcycle silhouette. Fold card base at the score lines.
3. Glue the dark gray pieces to the coordinating shapes on the motorcycle silhouette.
4. Glue the two round orange lights to the coordinating shapes on the motorcycle silhouette and the silver long bars into place. 
5. Glue the circle vellum piece to the  open circle (light silver) headlamp piece. Use foam adhesive squares to attach the long black tie into place.
6. Turn the combined motorcycle over and glue the combined vellum circle into place. (Vellum side down so that it shows on the pretty side)
7. Use foam adhesive squares to attach the motorcycle into place:)
8. Ta da!

You are the Bomb Pop

You are the Bomb Pop-JMR

Card size: H 5.5” X W 4.25”

This print and cut design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Labrador Retriever Dog Basket

Labrador Retriever Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4” including handle

This cute Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Flip the basket base as shown. Fold the basket base at the score lines. Glue the black paw prints to the slightly larger paw prints; centering them. Glue the face piece with eye cut outs to the larger face piece. Attach the nose to the muzzle piece with a foam adhesive square.
3. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the light colored paw print pieces with cut outs to the combined paw prints. Using foam adhesive squares; attach the combined nose/ small muzzle piece to the combined dog face. Curve the dog tongue as you like.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. Glue the tongue into place (optional). 
5. Glue one of the two fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the combined head and front paws to the front of the basket base.
6. On the backside: Glue the last fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the tail and back combined paws to the back of the basket.
7. Insert the handle piece into the slots on each side of the combined basket.
8. I used adhesive enamel dots to accentuate the eyes and collar and finished with a ribbon:)

Deer Track Ornament Gift Tag

Deer (Reindeer) Track Ornament Gift Tag- JMRush 

Approximate Tag size: H 4” X W 2.5”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Use foam adhesive squares to attach the animal track piece to the ornament base (lager piece with circular hanger); centering it.
3. Glue the smaller piece with a circular hanger to the backside of the combined piece; centering it. (This piece is optional and is meant for a writing space if design is used for a gift tag) Finish with a ribbon and a enamel dot:)

Goose Ornament Gift Tag

Goose Ornament Gift Tag- JMRush 

Approximate size: W 5.5” X H 3”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Glue the goose silhouette with eye and beak cut outs to the goose silhouette with a circle eye cut out.

3.Glue the headless breast /wing piece to the combined goose.

4. Glue the small cheek, breast, and tail markings to the combined goose.

5. Use foam adhesive squares to attach the wing to the combined goose.

6. Flip the Goose base (with circular hanger) over ( pretty side down). Center and glue the solid goose silhouette to the base. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament) Flip this combined piece back over ( pretty side up).

7. Attach the combined goose to the front of the combined goose base with pieces foam adhesive squares. Do not peel the backing off of the adhesive on the head portion of the goose yet.

8.-9. I used a fine tipped marker to make a mark through the eye hole from the top section to the back. I placed a small enamel dot for the eye on the bottom section. I removed the backing from the adhesive on the goose head and secured the head to the base.

Corgi Hug Gift Card Holder

Corgi Hug Gift Card Holder-JMRush

Approximate Card size: W 4” X H 5.75”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Father’s/Mother’s Day, a thank you for your groomer, or for any occasion. This design is compatible with both 8X12 and 12X12 mats and fits most gift cards.
You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the card base)

2. Fold the card along score lines. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the largest dog head with circle eyes to the solid dog head base.

5. Glue the second largest dog head to the combined dog head.

6. Glue the third largest dog head to the combined dog head.

7. Glue the circle medallion to the coordinating shape on the collar of the combined dog head and glue the inner ears into place. Glue the tongue to the backside of the muzzle piece- careful that it does not show through the nose holes:)

8. Glue the combined muzzle piece to the combined dog head. Glue the nose into place.

9. Use foam adhesive squares to attach the combined dog head to the front of the card base. Insert gift card.

10. The hands tuck into the slots on the front. I popped the dog’s collar to the front of the gift card section.

11. Use a foam adhesive square to attach the heart in the center of the hands. Finish with ribbon and enamel dots to accentuate the eyes:)

Welsh Corgi Card

Welsh Corgi Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces. ( I used double sided card stock for the card base:)
2. Fold the card base. Glue the smallest dog silhouette to the second largest dog silhouette.
3. Glue the collar and ear to the combined dog silhouette.
4. Use foam adhesive squares to attach the combined dog to the largest dog silhouette.
5. Use foam adhesive squares to attach the combined dog silhouette to the front of the card base.
6. Use adhesive enamel dots for the nose and eye. I attached them to the largest dog silhouette layer under the two top layers. Finish with a jewel on the collar.

Bichon Frise Hug Gift Card Holder

Bichon Frise Hug Gift Card Holder-JMRush

Approximate Card size: W 4” X H 5.50”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Father’s/Mother’s Day, a thank you for your groomer, or for any occasion. This design is compatible with both 8X12 and 12X12 mats and fits most gift cards.
You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the card base) (There is a heart design piece missing from this tutorial)

2. Fold the card along score lines. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the dog head with circle eyes to the solid dog head base.

5. Glue the dog head with oblong eyes to the combined dog head.

6. Use foam adhesive squares to attach the muzzle piece to the combined dog head.

7. Glue the backside of each ear at the top and at the bottom and attach to the combined dog head.

8. Use foam adhesive squares to attach the oval forehead piece to the combined dog head.

9. Use foam adhesive squares to attach the combined dog head to the card base.

10. Insert gift card.

11. I used enamel dots to accentuate the eyes.

12. The hands tuck into the slots on the front. Use a foam adhesive square to attach the heart in the center of the hands. Finish with ribbon:)

Trout Card

Trout Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.
You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card base. Glue the second largest fish (with cut outs) to the solid fish base.

3.Glue the third largest piece to the combined fish.

4. Glue the long piece with a mouth to the combined fish.

5. Glue the last belly piece to the combined fish.

6. Glue the jaw and fins into place.

7. Attach the combined fish to the front of the card base by using foam adhesive squares. Finish with a small enamel dot for the eye:)

Canada Goose Card

Canada Goose Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.
You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( There is a tiny circle eye in this file if you choose to use it. I used a small enamel dot for the eye)

2. Glue the second largest goose silhouette to the largest goose silhouette.

3.Glue the third largest piece to the combined goose.

4. Use foam adhesive squares to attach the wing to the combined goose.

5. Fold the card base. Glue the cheek, breast, and tail markings to the combined goose.

6. Glue the combined goose to the front of the card base. Glue the tiny circular eye inside the coordinating shape on the combined goose-if you choose or use a small enamel dot for the eye:)

Father’s Day Beer Mug Card

Father’s Day Beer Mug Card-JMRush

Approximate size: W 5.25 x H 4.25”

The Father’s day beer mug card features front cover word art that states “Happy Father’s day” and is bordered by

Beer mug side panels. The card opens to a blank back page ( like a regular card ) and fits in a regular envelope. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces.

2. Fold the top rectangle behind.

3. Fold the side panels in toward the center of the card base. 

4. Glue the beer mug shapes with long oval cut outs to the coordinating solid shape.

5. Glue two of the combined beer shapes to the beer mug shapes with a small bump in the handle.

6. Glue the side panel pieces to the coordinating shapes on the card base.

7. Glue the larger beer foam bubble shapes to the combined beer pieces.

8. Glue the T-shirt with word art to it’s coordinating solid shaped base.

9. Glue the combined T-shirt to the Body piece with arms.

10. Glue the body piece to the front of the card base centering it.

11. Glue two (of the four) hand shapes to either side of the inside panels.     Straight edge to the crease line of the card and toward the top of the beer mug handle.

12. Glue the Beer mugs pieces that have a handle with a small bump to the coordination shape on the inside panels.

13. Glue the small thumbs on the inside of the panels. The thumb nail will fit over the small bump of the beer mug handle.

14. Using pieces of foam adhesive squares, attach the small beer foam bubble shapes to the beer mugs on the inside panels.

15. Using pieces of foam adhesive squares, attach the knuckle shapes to the inside panels.

16. Glue the other two hand shapes to the outside of the card and attach the last two small foam bubble shapes to the front of the card using pieces of foam adhesive squares:)

Pomeranian Hug Gift Card Holder

Pomeranian Hug Gift Card Holder-JMRush

Approximate Card size: W 4” X H 5.75”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Mother's/Father's Day, a thank you for your groomer, or for any occasion. This design is compatible with both 8X12 and 12X12 mats. Fits most gift cards. 

1.Cut design pieces. (I used double sided card stock for the card base) ( I changed the color of the largest dog head piece- I ended up  using the same color as the card base.)

2. Fold the card along score lines. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the large dog head to the solid dog head base. Glue the two smaller dog heads together- with the smaller one on top.

5. Glue the face to the top of the combined smaller dog head. Use foam adhesive squares to attach the two sets of combined heads together.

6. Glue the nose to the top of the muzzle piece. Use pieces of foam adhesive squares to attach the muzzle to the combined dog head. glue the small eyes into place (optional- I use adhesive jewels at the end of this tutorial:) Glue the narrow hair strip into place on the dog’s forehead.

7.-8.-9.Use foam adhesive squares to attach the combined dog head to the card base. Only attach the very top of the backside of the dog head. The head needs to be able to flex in order for the gift card section to fold under as seen in photo #9. Insert gift card.

10.-11. The hands tuck into the slots on the front. Use a foam adhesive square to attach the heart in the center of the hands. Finish with ribbon and add adhesive jewels for the eyes:)

Weenie Dog Floppy Ears Card

Weenie Dog Floppy Ears Card-JMRush

Approximate Card size: H 4.5” X W 4.75”

This design is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces. ( I used double sided card stock for the dog)
2. Fold the score lines on the dog ears. Glue the round small medallion into place at the coordinating shape on the dog head solid base. Glue the collar piece on the solid head base and then the dog head with folded ears.
3. Glue the long piece with nose and mouth cut outs to the piece with cut out eyes, nose, and mouth. Glue the nose to the muzzle piece. 
4. Glue the combined piece with eye holes to the combined dog head with folded ears. Glue the small round eyes into place.
5. Use a foam adhesive square to attach the muzzle to the combined dog head with folded ears.
6. Glue the ears to the coordinating shape on the combined dog head piece with folder ears.
7. Fold the card base. Use foam adhesive squares to attach the combined dog to the front of the card base.
8. Use adhesive enamel dots to accent the dog’s eyes:)

Floppy Ears Labrador Retriever Card

Floppy Ears Labrador Retriever Card-JMRush

Approximate Card size: W 5.25” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

 

1. Cut design pieces. ( I used double sided card stock for the dog)
2. Fold the score lines on the card base and on the dog face with ears. Glue the dog face with ears to the dog face base.
3. Glue the tongue to the back of the muzzle ( I curved the tongue slightly for dimension.— Make sure to check the length that you have sticking out). Use a foam adhesive square to attach the nose to the muzzle. Glue the ears to the coordinating shape on the dog face combined piece. ( I used a slightly lighter color of card stock for the muzzle and ear pieces).
4. Use foam adhesive squares to attach the muzzle to the combined dog and the combined dog to the front of the card base.
5. Use adhesive enamel dots to accent the dog’s eyes and for studs on the dog’s collar:)

Boxer Dog Card

Boxer Dog Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. 
2. Fold the card base. Glue the smallest dog silhouette to the solid largest dog silhouette.
3. Glue the smaller face with a eye hole to the larger face with an eye hole (You only need to use the bottom face piece if you wish for your dog to have a white mark on his face:) Glue the neck marking and socks on the silhouette with a ear hole( if you wish to use them) and glue the collar on. Glue the socks on the combined silhouette ( if you wish to use them). Use foam adhesive squares to attach the last dog silhouette to the top of the combined dog silhouette. Glue the collar on. 
4. Use foam adhesive squares to attach the dog silhouette with a ear hole to the combined dog silhouettes. On the top dog silhouette- glue the tip of the nose down. Glue the combined silhouette to the card base.
5. Use a adhesive dot for the nose and jewels to decorate the collar.

Labrador Retriever Card

Labrador Retriever Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. ( I used double sided card stock for the card base)
2. Fold the card base. Glue the largest dog silhouette (solid) to the coordinating shape on the front of the card base.
3. Glue the smallest dog silhouette to the largest dog silhouette on the front of the card base. 
4. Use foam adhesive squares to attach the last dog silhouette to the top of the combined dog silhouette. Glue the collar on. Use a foam adhesive square to attach the ear. Use a adhesive enamel dot for the nose:) 

Scottish Terrier Card

Scottish Terrier Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces. ( I changed the color of the collar to match the inside color of the card)
2. Fold the card base. Glue the largest dog silhouette (solid) to the coordinating shape on the front of the card base.
3. Glue the smallest dog silhouette to the largest dog silhouette on the front of the card base. 
4. Use foam adhesive squares to attach the dog silhouette with one ear to the top of the combined dog silhouette. Glue the collar on.
5. Use a adhesive enamel dot for the nose:) 

Weenie Dog Card

Weenie Dog Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.
You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the card base. Glue the largest dog silhouette to the coordinating shape on the front of the card base. Use foam adhesive squares to attach the dog silhouette with a smile on top of the dog silhouette without the smile.
3. Glue the small ear to the top of the larger ear. Glue the collar to the combined dog silhouette.
4. Use a foam adhesive square to attach the combined ear to the combined dog silhouette. Glue the combined dog silhouette to the large dog silhouette on the front of the card base. 
5. Use adhesive dots for the nose and eye:)

Fish Love Story - Card

Fish Love Story - JMRush

Card size: 4.25 X 5.5

The Fish Love Story card is the perfect card for your fishing enthusiast. This cut file needs to be used with a 12 X 12 mat and contains a cute accordion style fold out.