Labrador Double Sticky Note Holder

Labrador Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

4. This is what the backside will look like:)

5. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

6. Insert the second sticky note stack into the backside pocket.

7. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using foam adhesive squares, attach the lab head piece with eye holes to the solid dog base.

8. Curve the small dog tongue as you like. Using foam adhesive squares, attach the black nose to the muzzle piece and the ears to the coordinating shapes on the combined dog. Glue the tongue by sliding it underneath the open section of the combined dog. 

9.Use a piece of foam adhesive square to attach the nose to the combined muzzle. I glued the top tips of the ears down to the combined dog base and used adhesive jewels to accent the eyes.

10. Insert a pen and finish with a ribbon:)

Labrador Retriever Dog Basket

Labrador Retriever Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 4” including handle

This cute Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Flip the basket base as shown. Fold the basket base at the score lines. Glue the black paw prints to the slightly larger paw prints; centering them. Glue the face piece with eye cut outs to the larger face piece. Attach the nose to the muzzle piece with a foam adhesive square.
3. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the light colored paw print pieces with cut outs to the combined paw prints. Using foam adhesive squares; attach the combined nose/ small muzzle piece to the combined dog face. Curve the dog tongue as you like.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box. Glue the tongue into place (optional). 
5. Glue one of the two fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the combined head and front paws to the front of the basket base.
6. On the backside: Glue the last fur detail pieces to the front center of the basket base; aligning at the bottom. Use foam adhesive squares to attach the tail and back combined paws to the back of the basket.
7. Insert the handle piece into the slots on each side of the combined basket.
8. I used adhesive enamel dots to accentuate the eyes and collar and finished with a ribbon:)

Floppy Ears Labrador Retriever Card

Floppy Ears Labrador Retriever Card-JMRush

Approximate Card size: W 5.25” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

 

1. Cut design pieces. ( I used double sided card stock for the dog)
2. Fold the score lines on the card base and on the dog face with ears. Glue the dog face with ears to the dog face base.
3. Glue the tongue to the back of the muzzle ( I curved the tongue slightly for dimension.— Make sure to check the length that you have sticking out). Use a foam adhesive square to attach the nose to the muzzle. Glue the ears to the coordinating shape on the dog face combined piece. ( I used a slightly lighter color of card stock for the muzzle and ear pieces).
4. Use foam adhesive squares to attach the muzzle to the combined dog and the combined dog to the front of the card base.
5. Use adhesive enamel dots to accent the dog’s eyes and for studs on the dog’s collar:)

Labrador Retriever Card

Labrador Retriever Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. ( I used double sided card stock for the card base)
2. Fold the card base. Glue the largest dog silhouette (solid) to the coordinating shape on the front of the card base.
3. Glue the smallest dog silhouette to the largest dog silhouette on the front of the card base. 
4. Use foam adhesive squares to attach the last dog silhouette to the top of the combined dog silhouette. Glue the collar on. Use a foam adhesive square to attach the ear. Use a adhesive enamel dot for the nose:) 

Labrador Retriever Card

Labrador Retriever Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats and can be cut on different colored cardstock to create a Yellow, Chocolate, or Black Lab.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces (The card base is not shown). Apply glue to top of the tongue piece and glue to the backside of face piece ( head shape with cut outs). The tongue will be centered to the top of the mouth cut out.

2. Glue the head piece to the head base. Glue the ears into place. Using a foam adhesive square, attach the nose to the muzzle.

3. Using a foam adhesive square, attach the muzzle to the head and the complete Lab head to the card base. Finish with enamel dots to enhance the eyes and for decoration around his collar:)

Labrador Retriever Hug Gift Card Holder

Labrador Retriever Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 5.75” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats and can be cut on different colored cardstock to create a Yellow, Chocolate, or Black Lab.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided cardstock for the card base)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Apply glue to top of the tongue piece and glue to the backside of face piece ( head shape with cut outs). The tongue will be centered to the top of the mouth cut out.

5.Glue the head piece to the head base. Glue the ears into place. Using a foam adhesive square, attach the nose to the muzzle.

6. Using a foam adhesive square, attach the muzzle to the head.

7. Using a foam adhesive square, attach the head to the card base.

8. The gift card can be inserted into the pocket of the card base and the hands tuck into the slots on the front.

9. Finish with ribbon and I used enamel dots to enhance the eyes:)