Unicorn Hug Gift Card Holder

Unicorn Hug Gift Card Holder - JMRush

Approximate Size: W 4.25” x H 6.5”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Easter, Valentine’s Day, or for any occasion. This design is compatible with both 8X12 and 12X12 mats and fits most gift cards.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the Card Base at the score lines. Glue the Unicorn head with ear, eye, and nose cut outs to it’s coordinating solid base. Glue the unicorn horn with cut outs to it’s coordinating solid base. Glue the eyes with eyelashes to the circles with small circle cut outs; aligning at the small circle. 

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Curl the eyelashes on the combined eyes as you like:) Glue the combined eyes to the coordinating shapes on the combined Unicorn head; aligning the small circles.

5. Curl the hair and tail pieces as you like. Glue the small hair piece to the combined unicorn head. 

6. Use a foam adhesive square to attach the combined unicorn horn to the combined unicorn head; aligning at the top of the horn. Use foam adhesive squares to attach the combined Unicorn head to the coordinating shape on the card base.

7. Glue the hooves to the hoover shapes on the card base. Use foam adhesive squares to attach the large hair piece to the back of the card base.

8. Insert gift card.

9. Fold the gift card section upward and tuck the hooves into the slots on the front of the gift card section (card base).

10. Attach the tail to the back of the card base with a foam adhesive square.

11. Finish with a ribbon:)

Mermaid Hug Gift Card Holder

Mermaid Hug Gift Card Holder-JMRush

Approximate Card size: W 6.25” X H 8.5”

This design features character arms that open to a hidden gift card pocket. This design is perfect for giving gift cards for Birthdays, Easter, Valentine’s Day, or for any occasion. This design is compatible with both 8X12 and 12X12 mats and fits most gift cards.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock)

2. Fold the card along score lines. Glue the mermaid face with eye and mouth cut outs to the larger mermaid head; centering and aligning at the bottom. Glue the eyes to the eyes with eyelashes; centering around the circular cut outs.. Shape the smaller flower with a center cutout and glue the center to the larger flower shape; centering and aligning the irregular petal shapes. Glue the larger bikini top to the inside of the card base. Glue one of the double hump mermaid tail tops to the inside of the card. Glue one of the small circle belly buttons to the inside of the card.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Curve the eyelashes as you like.

4. Glue the combined eyes to the combined mermaid head; centering around the eye out outs. Glue the small hair piece to the combined head; aligning at the top of the top face layer ( leaving a band of white (hair band). Insert gift card into the pocket. Use a foam adhesive square to attach the tail end to the coordinating shape on the large tail section.

5. Fold the gift card section upward and glue the small bikini top, last double hump mermaid tail top, and small circle belly button to this section. The double hump mermaid tail top will aligning just slightly under the folded gift card section. Use a piece of foam adhesive square to attach the combined flower to the combined head.

6. Using foam adhesive squares, attach the combined head to the coordinating shape on the card base and to attach the combined tail section to the backside of the card base. 

7. Use foam adhesive squares to attach the large hair piece to the backside of the combined card base; centering and allowing a small section to show above the hair band section. I used a small enamel dot to accentuate the center of the flower. The hands tuck into the slots on the heart piece to close:)

Unicorn Centerpiece Card Keeper

Unicorn Centerpiece Card Keeper- JMRush 

Approximate Box Size: W 2.25” X D 5.75” X H 5.5” 

Height including Unicorn Figure: W 5.5” X D 7.5” X H 10”

The Unicorn Centerpiece has an open box area that can be used to hold classroom Valentine’s or Birthday cards as it doubles as a centerpiece:) This file could also be used as a small gift bag and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock) ( I added to this file during the shooting of this tutorial. You will have two additional rectangles (see image 2), the box base pieces are larger, and there will be two large hair pieces:) I have also grouped the cut file in color sections. You can ungroup as you like:)

2. Two additional rectangles.

3. Glue the Unicorn head with ear, eye, and nose cut outs to it’s coordinating solid base. Glue the unicorn horn with cut outs to it’s coordinating solid base. Glue the thin hooves to the coordinating larger hoove pieces; aligning at the bottom. Glue the eyes with eyelashes to the circles with small circle cut outs; aligning at the small circle and curling as you like. Fold the two tail pieces at the score lines.

4. Glue the combined eyes to the coordinating shapes on the combined unicorn head. Glue the hair to the combined unicorn head; centering it. Glue the combined hooves to the front of the full unicorn silhouette and unicorn backside at the coordinating shapes. Apply glue to one side of the scored tail section and secure the other scored tail section aligning the edges.

5. Use foam adhesive squares to attach the oval muzzle piece with nose holes to the coordinating shape on the combined unicorn; aligning the nose holes. Use foam adhesive squares to attach the combined unicorn horn to the combined unicorn head; aligning at the top of the horn.

6. Use foam adhesive squares down the seam line of the combined scored tail section and attach to the coordinating solid tail base.

7. Use Foam adhesive squares to attach the combined unicorn head to one of the large hair pieces; aligning at the bottom center. Flip the full unicorn silhouette and backside over and glue the remaining combined hooves to the coordinating shapes; aligning at the bottom and edges. Flip both silhouettes back over.

8. Use foam adhesive squares to attach the combined head to the full unicorn silhouette; aligning at the unicorn horn and centering. Glue the second large hair piece to the backside of this combined piece to the coordinating shape. Use foam adhesive squares to attach the combined tail to the backside silhouette section; centering horizontal and vertically. Apply glue to the very right edge of the largest box base piece. ( Your box base will be larger than what is shown:) Align the center tab of the smaller box base piece and place it on top of the glue area; aligning at the score line. Allow to dry.

9. Like this:)

10. Fold the tabs at the score lines of the combined box base.

11. Apply glue to backsides of the top and bottom vertical tabs. Secure to the rectangular shape in the middle of the combined box base.

12. Apply glue to the backsides of the top and bottom horizontal tabs and secure to the inside of the box.

13. It should look like this:)

14. Two gray rectangles. Apply glue to the backside of each and secure to the narrow sides of the box base; aligning at the bottom (open are of the box is up)

15. Repeating for the other narrow side.

16. Apply glue to the entire white section of the narrow section of the box base and along the very edges of the gray rectangle.  Attach the combined backside/tail unicorn silhouette; centering it and aligning the hooves with the bottom edge of the box base. Allow to dry.

17. Repeat for the other narrow side of the box base. 

18. Attach the combined full unicorn silhouette; centering it and aligning the hooves with the bottom edge of the box base. Allow to dry.

19. I finished with ribbons and an enamel jewel in the center:)

Unicorn Card

Unicorn Card-JMRush

Approximate Size: W 4.25” x H 4.25”

This simple to construct card would be perfect for birthday party invitations or used as a gift tag and fits in a standard A2 envelope. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the Unicorn head with ear, eye, and nose cut outs to it’s coordinating solid base. Glue the unicorn horn with cut outs to it’s coordinating solid base. Glue the eyes with eyelashes to the circles with small circle cut outs; aligning at the small circle. Curl the eyelashes as you like:) Fold the card at the score lines and glue the solid head without a horn shape piece to the inside of the card base.

3. Glue the hair to the combined unicorn head; centering it. Use foam adhesive squares to attach the oval muzzle piece with nose holes to the coordinating shape on the combined unicorn; aligning the nose holes.

4. Use a foam adhesive square to attach the combined unicorn horn to the combined unicorn head; aligning at the top of the horn. Fold the card and apply glue to the top side.

5. Attach the combined unicorn head. I finished with a ribbon and a enamel jewel.

Unicorn Open Mouth Treat Box

Unicorn Open Mouth Treat Box-JMRush

Approximate Size: W 5.75” x D 1.25”x H 6”

Approximate Box size: W 2.5” x D 1 x H 4” 

This box opens by lifting the character’s head to to expose the opening to the treat box. This simple to construct design would be perfect to hold your goodies for Valentine’s Day or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the Unicorn head with ear, eye, and nose cut outs to it’s coordinating solid base. Glue the unicorn horn with cut outs to it’s coordinating solid base. Glue the oval (ish) piece with tooth cut outs to the bottom section of the long mouth base; aligning at the center cut out oval. Glue the eyes with eyelashes to the circles with small circle cut outs; aligning at the small circle. Curl eyelashes as you like.

3. Glue the hair to the combined unicorn head; centering it. Use foam adhesive squares to attach the oval muzzle piece with nose holes to the coordinating shape on the combined unicorn; aligning the nose holes.

4. Use a foam adhesive square to attach the combined unicorn horn to the combined unicorn head; aligning at the top of the horn.

5.  Fold the score line on the long mouth base. Apply glue to the backside of the combined unicorn head. Attach to the top of the long mouth base piece; aligning at the bottom and edges. 

6. This is what it should look like:) Flip the box base over, like so.

7. Fold the score lines on the box base. Use foam adhesive squares to attach the teeth to their coordinating shapes on the inside of the Combined unicorn head/long mouth piece.

8. Apply glue to the two small vertical side tabs at the bottom of the box base.

9. Secure the two small vertical side tabs to the 1 inch (width) rectangles just above them. 

10. Apply glue to the very left corner of the horizontal tab just below the two side tabs that you just glued. ( My finger is pointing to the section in the photo:) Secure this corner to the vertical tab to the left.

11. Apply glue to the topside of the vertical and horizontal panel. Secure the final panel creating a complete box.

12. Secure the tab on the box base by tucking the tab on the inside of the box and feeding it through the slot. Apply glue to the underside of the tab and secure to the box.

13. Apply glue to the tab side of the box base. Flip the box base over and secure it to the large hair/mane piece; centering the box.

14. Glue the bottom of the combined long mouth piece to the top of the combined box base; aligning the oval cut outs in the middle.

15. I finished with ribbons, a enamel jewel, and filled her with Hersey kisses:)