Polar Bear Flip Gift Card

Polar Bear Flip Gift Card- JMRush 

Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
10. Ta Da!

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Gnome Flip Beard Gift Card

Gnome Flip Beard Gift Card- JMRush 

Approximate Card size: H 6.25” X W 4.25”

This design has a gift card pocket under the Gnome’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest Gnome suit piece to the middle layer of the card base. Glue the small Gnome suit piece to the black Gnome bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base. Apply glue to the side tabs on the card base.
3. Attach the side tabs to the middle section. Allow to dry. Glue the square buckle into place. Glue the hat detail to the hat base.
4. Insert gift card. Glue the combined Gnome suit piece to the coordinating shape on the card front.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:) Use a piece of foam adhesive square to attach the combined holly to the hat.
6. Find placement of the hat. Use foam adhesive squares to attach the nose and mustache. Apply glue to the top of the card base and attach the combined hat:)
7. Ta Da!

2018 Mint Box

2018 Mint Box- JMRush 

Approximate size: W 1.75” X D 5/8” X H 3”

This file is designed to hold a standard Tic Tac™ container and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the backside of the bottom tab and the lower two side tabs. Secure the panels to the left to the tabs.
3. Apply glue to the backside of the long side tab on the right and secure it underneath the top panel.
4. Insert standard size Tic Tac™ box. This tutorial shows a mini Tic Tac™ box.
5. Insert the top flap into the slot on the box base.
6. Flip the box base over. Apply glue to the backside of the 2018 piece and center on the box side without the flap/slot.
7. I finished by hot glueing a ribbon and a jingle bell to the top:)

Elf Flip Top Gift Card Holder

Elf Flip Top Gift Card Holder- JMRush 

Approximate Card size: H 5.75” X W 4.5”

This design has a gift card pocket under the Elf’s Head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest green elf suit piece to the middle layer of the card base. Glue the small green elf suit piece to the black elf bottom piece; aligning at the bottom center and edges. Glue the square buckle into place. Glue the face piece to the face base.
3. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
4. Insert gift card. Glue the hair, teeth, and collar piece to the combined face piece. Glue the hat band and feather to the hat. Glue the combined elf suit piece to the coordinating shape on the card front.
5. Glue the combined elf face to the top front of the card base. Use small pieces of foam adhesive squares to attach the nose.
6. Flip the card base over and apply glue to the top section being careful not to apply glue to the gift card tab section. Glue the hat into place.
7. I used small adhesive dots to accentuate the eyes:)

Santa Flip Beard Gift Card Holder

Santa Flip Beard Gift Card Holder- JMRush 

Approximate Card size: H 4.75” X W 4.5”

This design has a gift card pocket under Santa’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest red santa suit piece to the middle layer of the card base. Glue the small red santa suit piece to the black santa bottom piece; aligning at the bottom center and edges. Glue the square buckle into place. Glue the small face piece and mustache to the face base. ( There are small eye holes in the base to align the eyes).
3. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
4. Insert gift card.
5. Glue the combined santa suit piece to the coordinating shape on the card front.
6. Glue the combined Santa face to the top front of the card base; aligning at the small eye holes. Glue the hat into place.
7. Use small pieces of foam adhesive squares to attach the nose and puff ball. 
8. I used small adhesive dots to accentuate the eyes:)