Gnome Gift Tag Ornament

Gnome Gift Tag Ornament-JMRush

Approximate Card size: H 4.75” X W 3”

This Gnome design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. I used double sided card stock.
2. Glue the largest Gnome suit piece (black) to the full solid gnome figure base. Glue the small hat brim piece to the hat base. Glue the holly berries to the holly leaf base. 
3. Glue the small Gnome suit piece to the combined full Gnome figure base; aligning at the bottom center and edges. I curled the edges of the combined holly and glued it to the combined hat piece.Glue the nose to the mustache piece; centering it.
4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the combined hat and nose/mustache to the combined head.
5. Use foam adhesive squares to attach the combined gnome head to the gnome body base. 
6. I used enamel adhesive jewels to accentuate the holly. Finish by adding a ribbon for a hanger.

Cardinal Gift Tag Ornament

Cardinal Gift Tag Ornament- JMRush 

Approximate size: W 5.25” X H 3”

This Cardinal Bird design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. I used double sided card stock.
2. Glue the largest bird silhouette(red) to the gift tag base. Glue the long red wing to the brown wing base. Glue the bird face to the bird (yellow) beak.
3. Glue the combined face and the feet to the coordinating shapes on the combined bird gift tag.Glue the large (light red) body to the combined bird gift tag. Glue the smaller (light red) feathers to last dark red wing piece.
4. Using foam adhesive squares, attach the combined little wing to the combined long wing.
5. Using foam adhesive squares, attach the combined wing to the combined bird gift tag base. Loop a ribbon through the center hole for a hanger and tie the ends together. I used an enamel adhesive jewel to accentuate the eye.
6. Flip the tag over and glue the white full bird silhouette to the back when using this design as a gift tag:)

Gingerbread Man Gift Tag Ornament

Gingerbread Man Gift Tag Ornament- JMRush 

Approximate Tag size: H 4.25” X W 3.25”

This Gingerbread man design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Flip the gingerbread man base over and glue the white gingerbread man base to it; centering it. Glue the round gingerbread man head with holes to the coordinating solid head base. 
3. Flip the combined base over. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
4. Glue the two hand and two foot curvy pieces to the combined base. Glue the combined nose to the combined face.
5. Use foam adhesive squares to attach the combined head and combined candy pieces to the front of the card base.
6. I used enamel adhesive jewels to accentuate the eyes and finish with a ribbon:)

Joy Santa Gnome Card

Joy Santa Gnome Card- JMRush 

Approximate Card size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Glue the largest Gnome suit piece to the full solid gnome figure. Glue to hat base piece to the gnome head base. Glue the holly berries to the holly base. 
3. Glue the small Gnome suit piece to the combined full Gnome figure; aligning at the bottom center and edges. Glue the hat brim piece to the combined gnome head piece.
4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the nose/mustache to the combined head and the green wreath to the black wreath base.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. Glue the combined holly to the hat.
6. Use foam adhesive squares to attach the combined gnome head to the gnome body base. Glue the lettering to the coordinating shapes on the card base.
7. Use foam adhesive squares to attach the combined gnome to the front of the card. I used adhesive enamel jewels to decorate the wreath:)

Polar Bear Flip Gift Card

Polar Bear Flip Gift Card- JMRush 

Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
10. Ta Da!

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Gnome Flip Beard Gift Card

Gnome Flip Beard Gift Card- JMRush 

Approximate Card size: H 6.25” X W 4.25”

This design has a gift card pocket under the Gnome’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest Gnome suit piece to the middle layer of the card base. Glue the small Gnome suit piece to the black Gnome bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base. Apply glue to the side tabs on the card base.
3. Attach the side tabs to the middle section. Allow to dry. Glue the square buckle into place. Glue the hat detail to the hat base.
4. Insert gift card. Glue the combined Gnome suit piece to the coordinating shape on the card front.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:) Use a piece of foam adhesive square to attach the combined holly to the hat.
6. Find placement of the hat. Use foam adhesive squares to attach the nose and mustache. Apply glue to the top of the card base and attach the combined hat:)
7. Ta Da!

Santa Chocolate Belly Holder

Santa Chocolate Belly Holder-JMRush 

Approximate size: W 4.5 x D 2.25 x H 4.25”

This easy to construct chocolate holder is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock. (There is a solid santa piece in this file that is not shown in this image tutorial. It is used as a backing. Sorry. I forgot to cut this piece)
2. Flip the box base over. 
3. Apply glue to the side tabs and secure the bottom panel; aligning at the edges.
4. Apply glue to the last tab and tuck under the snowman shape;align at the edge.
5. Image of the backside. Apply glue to the backside of the santa shape (not shown in image) and secure the solid santa to the santa base; centering it.
6. Flip the combined santa to the front. Glue the belt buckle to the center of the belt. Glue the belt so it forms a circular shape the size of the chocolate. Place the belt around the chocolate.
7. Use a glue to attach the hat, face, hat brim pieces to the santa head. Use pieces of foam adhesive squares to attach the heels of the shoes to their shoe bases.
8. Glue the hands and cuffs to the santa box base. Glue the tiny eyes to the combined santa head. Glue the tiny nose to the upper center of the mustache piece. Use a piece of foam adhesive squares to attach the combined mustache to the combined head.
9. Glue the combined head to the combined santa base. Use foam adhesive squares to attach the feet to the box base:)

Snowman Chocolate Belly Holder

Snowman Chocolate Belly Holder-JMRush 

Approximate size: W 3.5 x D 2.25 x H 4.25”

This easy to construct chocolate holder is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Flip the box base over. 
3. Apply glue to the side tabs and secure the bottom panel; aligning at the edges.
4. Apply glue to the last tab and tuck under the snowman shape;align at the edge.
5. Image of the backside. 
6. Apply glue to the backside of the snowman shape (as shown) and secure the solid snowman to the snowman base; centering it.
7. Flip the combined snowman to the front.
8. Use a glue to attach the hat, nose, arms, and scarf piece to their coordinating shapes on the combined snowman base.
9. This is what it should look like:)
10. Glue the belt buckle to the center of the belt. Glue the heels of the shoes to the shoe bases.
11. Glue the belt so it form a circular shape the size of the chocolate.
12. Place the belt around the chocolate. I used small adhesive jewels to accent the eyes.

White Long Hair Cat Handle Basket

White Long Hair Cat Handle Basket- JMRush 

Approximate Box size: H 2.25” X W 3” X D 2.25”

Approximate Design size: W 4.5” X H 5.5” including handle

This cute basket design is a perfect container for treats for your favorite feline, a small gift for your veterinarian, or a party favor. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. ( I used double sided card stock and glitter card stock of the eyes) (There are two pink noses in this file that is not shown in the tutorial and I adjusted the tail to be larger)
2. Glue the face piece with openings and a chin to the coordinating black solid cat face. I used a marker to color the outside edges of both large blue eyes. Glue them to the openings in the combined cat face. Glue the smaller solid paws and feet to the larger solid feet and paws.
3. Glue the fury bottom piece to the coordinating shape on the lower section of the basket base. Glue the other fury chest/head piece to the coordinating shape on the upper section of the basket base.
4. Glue the combined cat face to the cat face/chest piece. Glue the inner ears to the coordinating shape on the combined cat face. Using foam adhesive squares, attach the smaller tail to the coordinating shape on the larger tail. Glue the small oval white pieces to the cording shapes on the cat’s eyes.
5. Attach the smallest cat head (with cut outs) to the combined cat face using foam adhesive squares. Glue the nose into place.
6. Glue the combined cat to the coordinating shape on the basket. Use foam adhesive squares to attach the front paws to the top section of the basket and the back feet and tail to the bottom section.
7. I used enamel dots to accentuate the eyes.
8. Flip the combined basket over. Fold the basket base at the score lines.
9. Apply glue to the top two tabs on the basket base and secure to the Cat shape above.
10. Apply glue to the bottom two tabs on the basket base and secure to the rounded shape above creating a box.
11. Image of box completed.
12. Insert the handle on either side of the basket.
13. I added a ribbon.
14. Use three small lengths of thread and apply hot glue to one of the groups of ends. Attach the nose. Repeat for the other side:)
15. Image of the whiskers glued.
16. Hot glue the second pink nose on top of the whiskers:)

Black Cat Handle Basket

Black Cat Handle Basket- JMRush 

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4.5” X H 5.5” including handle

This cute basket design is a perfect container for treats for your favorite feline, a small gift for your veterinarian, or a Halloween party favor. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. ( I used double sided card stock and glitter card stock of the eyes) 
2. Glue the fury bottom piece to the coordinating shape on the lower section of the basket base. Glue the other fury chest/head piece to the coordinating shape on the upper section of the basket base. I used a marker to color the outside edges of both large yellow eyes.
3. Glue the yellow eyes to the coordinating shape on the combined basket. Glue the smaller solid paws and feet to the larger solid feet and paws.
4. Attach the cat head ( black with cut outs) to the combined basket using foam adhesive squares.
5. Use a small piece of foam adhesive square to attach the nose. ( Hint- I use a black sharpie to color the edges of the white foam adhesive square so it’s not so noticeable:) Use foam adhesive squares to attach the front paws to the top section of the basket and the back feet and tail to the bottom section.
6. Flip the combined basket over. Fold the basket base at the score lines.
7. Apply glue to the top two tabs on the basket base and secure to the rounded shape above.
8. Apply glue to the bottom two tabs on the basket base and secure to the head shape above creating a box.
9. Insert the handle on either side of the basket.
10. Use three small lengths of thread and apply hot glue to one of the groups of ends. Attach underneath the nose. Repeat for the other side:)
11. I used enamel dots to accentuate the eyes and added a ribbon:)