Christmas Lightbulb Window Picture Frame

Christmas Lightbulb Window Picture Frame - JMRush  Frame Dimensions: W5” x H 6.25”

This Christmas themed frame features a fold out stand and is sized for four “exchange” or “mini” sized (1.75 x 2.5”) pictures. Black thread is needed for the wire look of this design. 

1. Cut design pieces.
2. Separate the kickstand.
3. Apply glue to the front of the kickstand piece. Center and attach the solid frame piece making sure that the kickstand does not get glued down.
4. Apply glue down the center line going across the backside of the window piece. Apply glue to the very center line going up and down the backside of the window piece. ( Your glue should be in a cross shape). Make sure that the edges on the left and right do not get glued down so that you can insert photos:). Glue the very top and very bottom of the backside horizontally. Center and secure to the front of the combined frame pieces.
5. You can insert photos on either side:)
6. Using foam adhesive squares, center and attach the window box piece to the front bottom of the frame. Using foam squares again, attach the window box trim piece.
7. Glue the lightbulbs to their solid bases.
8. Glue the small plug in detail to the lightbulbs.
9. Layout the lightbulbs as you like.
10. Using black sewing thread, weave around the lightbulbs as you glue them into place. ( I changed the color of the frame..sorry. The beige frame was just not working for me;)

Christmas Light Bulb 3D Gift Tag

Christmas Light Bulb 3D Gift Tag-JMRush

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines.

3.Apply glue to the front of the plain solid light bulb design piece. Glue it to the back of your Gift Tag base. (This piece is included in case you use double sided paper and need a plain surface to write on:)

4. Apply glue to the right hand backside of one of your folded light bulbs.

5. Attach the left backside of the next folded light bulbs.

6. Repeat until all folded light bulbs are combined.

7. Apply glue to the backside of the combined 3D light bulb section and glue to the base. Glue the screw design piece into place.

8. Finish with a ribbon and adhesive jewels:)

Christmas Light Bulbs Card

Christmas Light Bulbs Card-JMRush

Card size: 5” x 3”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut out all design pieces.
2. Fold all score lines.
3. Apply glue to the edges of the inside of the cut outs on the top..making sure that your glue does not show through the front.
4. Secure the top panel that has a cut outs. 
5. Apply glue to the bottom inside gift card section. Secure the bottom panel that has cut outs on.
6. Apply glue to the top section.
7. Secure the full top panel to the base and apply glue to the bottom section.
8. Secure the full bottom section on and apply glue to the very outside edges of the gift card section. ( If your glue gets too far inward, your gift card section will not work properly).
9. Secure to the card base.
10. Glue the light bulb screw ends on each light bulb. This file contains two different designs for this part. There are solid ends if you prefer to use those:)
11. Repeat on the front. Finish with a ribbon.
12. Ta Da! Your card is done:)