Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Robot Double Sticky Note Holder

Robot Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock. ( I substituted colors on the small antenna circle from grey to silver. Grey is shown in this tutorial and silver on the finished product image)

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Top view.

4.- 5. This is what the backside will look like:) Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side. Glue the silver head piece with cutouts to the coordinating solid head shape. Glue the two smaller square foot pieces to their coordinating larger square foot pieces; centering them. Glue the two hand pieces to the coordinating shapes on the robot base; centering them.

6. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using pieces of foam adhesive squares, attach the combined feet, the combined head, and the small antenna circle to the coordinating shapes on the robot base. Using a foam adhesive square, attach the heart to the center of the combined robot.

7. Attach the combined robot to the front of the sticky note holder with foam adhesive squares; centering it. 

8. Insert the back of a sticky note stack inside the slot provided. Insert the second sticky note stack into the backside pocket.

9. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Labrador Double Sticky Note Holder

Labrador Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

4. This is what the backside will look like:)

5. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

6. Insert the second sticky note stack into the backside pocket.

7. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using foam adhesive squares, attach the lab head piece with eye holes to the solid dog base.

8. Curve the small dog tongue as you like. Using foam adhesive squares, attach the black nose to the muzzle piece and the ears to the coordinating shapes on the combined dog. Glue the tongue by sliding it underneath the open section of the combined dog. 

9.Use a piece of foam adhesive square to attach the nose to the combined muzzle. I glued the top tips of the ears down to the combined dog base and used adhesive jewels to accent the eyes.

10. Insert a pen and finish with a ribbon:)

Valentines Bus Card

Valentines Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock.

2. Glue the smaller bus to the larger one. Fold the card base.

3. Glue the floral bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the three hearts; smallest on top:)

4. Glue the four solid circles ( two red and two white) to the inside of the open circles; centering them.

5. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the combined hearts to the center of the combined bus.

6. Use pieces of foam adhesive squares to attach the bottom silver bumper piece and side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. 

7. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it:)