Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Winter Birdhouse Card

Winter Birdhouse Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (Be careful not to scrap the little circles that are grouped with two of the groupings:)

2. Fold the card base at the score lines. Glue the pinecone cut out pieces to their coordinating pinecone solid bases.  Glue the small circle to the larger one; centering it. Flip the smaller birdhouse group (with cut outs) over ( pretty side down).  Attach pieces of foam adhesive squares to it and to the triangular roof shaped birdhouse top.

3. Flip the smaller birdhouse back over and attach it to the larger one; centering it. Flip the smaller triangular roof piece back over and attach it to the larger one; aligning at the top and the outside edges. Flip this combined triangular roof piece over ( pretty side down) and attach foam adhesive squares. Flip the combined circle piece over and attach a piece of foam adhesive square to it.

4. Flip the combined triangular roof piece over and attach it to the combined base piece. Flip the combined birdhouse piece over and attach it to the combined base. Flip the combined circle piece over and attach it to the front of the combined birdhouse. Curve the pine needles and combined pinecones as you like. Glue two of the pine needle sets to the top of the combined birdhouse. Flip the combined pinecones over (pretty side down) and attach a foam adhesive square to each one. 

5. Flip the combined pinecones back over and attach to the combined birdhouse.
6. Glue the other two sets of pine needles to the combined birdhouse. I finished with a ribbon and enamel dots. Glue the birdhouse to the front of the card base:)

Winter Birdhouse Ornament Gift Tag

Winter Birdhouse Ornament Gift Tag- JMRush 

Approximate size: W 4.5” X H 5.75”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (Be careful not to scrap the little circles that are grouped with two of the groupings:)

2. Flip the Base piece (with a circular hanger) over ( pretty side down). Center and glue the solid birdhouse shape to the base. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament) Flip this combined piece back over ( pretty side up).  Glue the pinecone cut out pieces to their coordinating pinecone solid bases.  Glue the small circle to the larger one; centering it. Flip the smaller birdhouse group (with cut outs) over ( pretty side down).  Attach pieces of foam adhesive squares to it and to the triangular roof shaped birdhouse top.

3. Flip the smaller birdhouse back over and attach it to the larger one; centering it. Flip the smaller triangular roof piece back over and attach it to the larger one; aligning at the top and the outside edges. Flip this combined triangular roof piece over ( pretty side down) and attach foam adhesive squares. Flip the combined circle piece over and attach a piece of foam adhesive square to it.

4. Flip the combined triangular roof piece over and attach it to the combined base piece. Flip the combined birdhouse piece over and attach it to the combined base. Flip the combined circle piece over and attach it to the front of the combined birdhouse. Curve the pine needles and combined pinecones as you like. Glue two of the pine needle sets to the top of the combined birdhouse. Flip the combined pinecones over (pretty side down) and attach a foam adhesive square to each one. 

5. Flip the combined pinecones back over and attach to the combined birdhouse.

6. Glue the other two sets of pine needles to the combined birdhouse. I finished with a ribbon and enamel dots:)