Vampire Treat Egg Holder

Vampire Treat Egg Holder -JMR

Approximate size: H 5” X W 4.5” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the vampire face to the coordinating shape on the box base. Glue two of the four curve hands to the front of the full vampire shape as shown.
3. Glue the eyes and collar into place on the box base.
4. Use pieces of foam adhesive squares to attach the red bow tie and the tiny little oval nose. I used adhesive jewels to accentuate the eyes.
5. Flip the box base over. Fold the score lines inward. Flip the full silhouette over and glue the ear/neck section and two remaining hands in place.
6. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry. Use pieces of foam adhesive squares to attach the cape collar on the vampire silhouette piece.

7. Apply glue to the small horizontal tab. Tuck under the vampire figure enclosing the box.

8. Apply glue to the backside of the vampire box base and attach the solid full body shape aligning at the edges.

9. This is what it should look like:)

10. Flip the box over to the front and attach the oval red shoes with foam adhesive squares.

Frankenstein Treat Egg Holder

Frankenstein Treat Egg Holder -JMR

Approximate size: H 5” X W 4.75” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the Frankenstein eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the small green jaw to the coordinating white jaw with teeth; aligning on the bottom and edges.
3. Using foam adhesive squares; attach the combined jaw to the coordinating shape on the full Frankenstein face; aligning at the bottom. Use foam adhesive squares to attach two of the hands to the coordinating shapes on the box base. 
4. Use foam adhesive squares to attach the combined eyes to the combined Frankenstein head. Glue the combined Frankenstein head to the coordinating shape on the box base. Using a piece of foam adhesive square, attach the small part of the tie knot to the tie base.
5. Glue the green back of the head shape and remaining hands to the full Frankenstein figure. Attach the combined tie to the front of the box base.
6. Flip the box base over (pretty side down). Fold the score lines. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.

7. Apply glue to the small horizontal tab. Tuck under Frankenstein figure enclosing the box.

8. Apply glue to the back of the box base and attach the combined full figure.

9. This is what it should look like:)

10. Attach the green oval feet with foam adhesive squares.

Werewolf Treat Egg Holder

Werewolf Treat Egg Holder -JMR

Approximate size: H 5” X W 6.25” X D 2.5”

This easy to construct Werewolf treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock. (You will have two of the orange t-shirt shapes.
2. Glue the werewolf eyes with cutouts to the coordinating base solid eye shape; centering it. Flip the box base over and fold score lines.
3. Glue the combined eyes to the back of the Werewolf face shape so the the combined eyes show through.
4. Using pieces of foam adhesive squares, attach the top of the werewolf face to the full solid werewolf face shape.  Use glue to attach the mouth section.
5. Using pieces of foam adhesive squares, attach the nose to the cording shape on the werewolf face. 
6. Glue the tiny white teeth (2) to the coordinating shape on the combined werewolf head.

7.  Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.

 8. Apply glue to the small horizontal tab. Tuck under the werewolf figure enclosing the box.

9. Flip the box base over. Fold the score lines inward.

10. Apply glue to the backside of the werewolf figure and attach the solid full body shape aligning at the edges. 

11. Flip the box base over. Glue one of the orange t-shirt shapes to the front; aligning at the side edges.

12. Using foam adhesive squares, attach the combined werewolf face to the coordinating shape on the front of the box base. 

13. Using pieces of foam adhesive squares, attach the feet and ears to the coordinating shapes on the box base.

14. I used adhesive jewels to accentuate the eyes.

15. Flip box base over. Apply glue to the back of the last orange t-shirt and attach to the back of the box base.

16. Using foam adhesive squares, attach the tail to the back of the box base.

17. This is what it should look like:)

 

Alien Treat Egg Holder

Alien Treat Egg Holder -JMR

Approximate size: H 5” X W 2.5” X D 2.5”

This easy to construct alien treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the alien eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the Green half alien face with cut outs to the white half alien face with cute outs and teeth; centering and aligning at the top.
3. Ignore this image- This image shows the box base and full figure flipped over. Do NOT glue the full figure to the box base at this point. I discovered during assembly that it is easier to glue it onto the back after assembly. This tutorial shows it glued into place. My mistake. 
4. Using foam adhesive squares, attach the full alien head to the cording shape on the front of the box base.
5. Glue the combined eyes and pink inside of the mouth into place.
6. Using pieces of foam adhesive squares, attach the hands, combined half face, and antennas to the coordinating shapes on the box base.
7. This is what it should look like:)
8. Flip the box base over. Fold the score lines inward.

1. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
2. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.
3. Image of tucking the tab.
4. Image of tucking the tab.
5. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
6. This is what it should look like:)

 

Campfire Smores

This file comes with the design shown. The design can be sized to fit your needs and is compatible with the 8x12 and 12x12 mats. Perfect for creating cards, layouts, shirts, totes, wood signs, wall art, vinyl, and more!

 

Camping Sticker Sheet 1

 Camping Sticker Sheet 1-JMRush

These camping themed designs are sized for a 8.5 X 11 print and cut sheet.  They can be used on a sticker sheet or standard letter size card stock, as a collection or individually. Great for planners, cards, scrapbooking, or any of your crafting projects.

Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.