Santa Handle Basket

Santa Handle Basket-JMR

Approximate size: W 4.5” x D 3” x H 5.5” (including handle)

Approximate box size: W 2.75” x D 2.25” x H 2.25”

This cute Santa Basket is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the white santa head to the coordinating beige santa head. Glue the beige hands to the coordinating white hands with ruffles.

3. Glue the combined santa head to the coordinating shape on the basket base. Glue the large hat piece to the coordinating shape on the combined basket base.

4. Using foam adhesive squares, attach the ruffle hat brim to the small hat piece and the black shoe heels to the shoe bases.

5. Glue the tiny black eye circles to the coordinating holes on the combined base. Attach the combined small hat piece to the combined base using foam adhesive squares.

6. Attach the eyebrows using pieces of foam adhesive squares. Attach the puff ball to the hat and  the nose to the mustache using foam adhesive squares.

7. I used adhesive jewels to accentuate the eyes.

8. Flip the base over as shown.

9. Apply glue to the two top tabs on the basket base and attach to the rounded section of the basket.

10. Repeat for the lower two tabs; creating a box.

11. This is what it should look like:)

12. Attach the combined hands to the front using foam adhesive squares.

13. Attach the combined shoes to the back using foam adhesive squares. Glue the belt buckle to the center of the handle.

14. Insert the handle to the slot on either side of the basket.

15. I added a ribbon to the handle:)

 

Hanging Tea Light Lantern

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com

Reindeer Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6347

Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6181

Gnome Hanging Tea Light Lantern

Scroll down for more construction instructions

Wreath Hanging Tea Light Lantern

Snowflake Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6694

Snowman Hanging Tea Light Lantern

Cricut grouping measurement: W 11.4111

Star David Tea Light Lantern
Cricut grouping measurement: W 9.8722

Nativity Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.5556

Pinecone Hanging Tea Light Lantern

Cricut grouping measurement: W 11.5514

Poinsettia Hanging Tea Light Lantern
Cricut grouping measurement: W 11.4111

Santa Belt Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6444

Star Hanging Tea Light Lantern
Cricut grouping measurement: W 11.3833

Christmas Tree Hanging Tea Light Lantern

Cricut grouping measurement: W 11.6639

Hanging Tea Light Lantern (Flameless)-JMRush

Lantern size: W 2.5 x D 2.5 x H 5”
Cricut grouping measurement: W 11.6181

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

 You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1.Cut design pieces. ( I used double sided card stock and vellum paper) This tutorial is being used for multiple design files. Yours may vary from tutorial images.

2. Fold all score lines. 

3. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

4. Glue the vellum paper to the window panels; centering around each of the cut out sections.

5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

6. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

7. This is what it should look like:)

8.-10. Repeat for the rest of the top tabs until fully enclosed.

11. Image of the last two tabs being secured.

12. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

13. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 

14. Repeat for the two top tabs creating a shallow box.

15. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

16.  Tuck the end tab into the slot creating a circular tube shape.

17. Secure until dry.

18. Place the narrow circular ring piece and square piece over the tube shape you just created.

19. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

20. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

21. This is what it should look like:)

22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

23. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. I finished this lantern with a ribbon:)

Bottom Image:)

Gnome Hanging Tea Light Lantern

1. Follow the above directions for the lantern base. (You will only have one set of the gnome decor in this file.) 

2. Using pieces of foam adhesive squares, attach the mustache to the top of the window; centering it ( make sure you chose the side that the circle hanger faces). Glue the belt buckle to the center of the lantern base. Curl the holly as you like.

3. Glue the nose to the mustache. Glue the red holly to the holly leaves.

4.  Using pieces of foam adhesive squares, attach the brim of the hat just above the nose/mustache.

5. Using enamel jewels, decorate the holly. I finished with a small pom pom glued to the top just under the circular hanger:)

Santa Belt file additions:)

Penguin Sweater Hug Gift Card Holder

Penguin Sweater Hug Gift Card Holder

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock) ( There are two additional earmuff pieces included in this file that are not shown in this tutorial until the end.)

2. Glue one of the sweater chest pieces to the coordinating shape on the base. Glue the sweater sleeves on either side on the coordinating shapes.

3. Glue the penguin face (with cut outs) and the ear muff base to the coordinating shapes on the base.

4. Using foam adhesive squares, attach the beak and the sweater collar to the combined base.

5. Using foam adhesive squares, attach the earmuffs to the coordinating shapes on the combined base.

6. Fold the card along score lines.

7. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

8. Insert gift card.

9. Fold the gift card section up. Glue (only the edges) the rectangle to the coordinating bottom section making sure that the score lines align and that the score lines are not glued down.

10. Flip the card over. Glue the other sweater chest piece to the coordinating shape and glue the remaining sleeve pieces to the each side.

11. Using foam adhesive squares, attach the remaining ear muff pieces and the remaining collar piece.

12. Flip the combined card base over and Tuck the hands into the slots.

13. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Reindeer Earmuffs Hug Gift Card Holder

Reindeer Earmuffs Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1.Cut design pieces. (I used double sided card stock)

2. Fold the card along score lines. Glue the head with cut outs to the solid antler/head shape; aligning at the top of the head. Glue the earmuff base to the coordinating shape on the card base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold bells to the red collar piece.

4. Insert gift card. Glue the black eyes to the coordinating shapes on the combined head. Glue the tiny white accent piece to the nose.

5.  Using foam adhesive squares, attach the earmuff to the earmuff base and the combined head to the collar piece;aligning at the top of the head . Using a foam adhesive square,attach the combined nose to the combined head.

6. Using foam adhesive squares, attach the combined head/collar piece to the card base; aligning at the top of the head.

7. Glue the hooves to the outside of the arms at the coordinating shapes.

8. Fold the gift card section up. Tuck the hands into the slots. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Winter Gnome Hug Gift Card Holder

Winter Gnome Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.5” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock)

2. Fold the card along score lines. Glue the black belt into place right above the first line of horizontal score lines and center it.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold square belt buckle to the center of the belt.

4.Glue the coordinating hat to the hat shape on the white head/beard piece.

5.  Insert gift card. Glue the combined head piece to the card base; aligning the beard along the edges of the top the card base.

6. Glue the hat trim piece to the combined face. Curl the green holly leaves as you like. 

7. Using foam adhesive squares attach the mustache to the combined beard/Head piece. 

8. Using a piece of foam adhesive square, attach the nose to the mustache. Glue the little red holly to the coordinating shape on the holly leaves.

9.Flip the card over. Glue the other red hat to the coordinating shape. Glue the hands into place.

10. Glue the white trim pieces just above the hands on each side. 

11. I finished with enamel jewels to accentuate the holly and a ribbon:)

( I used markers to color the enamel jewels the color I wanted:)

12.  Use a piece of foam adhesive square to attach the combined holly to the hat. 

 

Winter Squirrel Hug Gift Card Holder

Winter Squirrel Hug Gift Card Holder

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

Approximate Card size: 4” x 6.25” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. (I used double sided cardstock for the card base)

2. Fold the card along score lines. Glue the face piece with holes to the coordinating solid face shape (black). Glue the white mitten edges to the outer straight edge of the mittens.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Insert gift card. 

5. Glue the beige face (with cutouts)to the combined face; aligning so that the cutouts align with the cutouts on the combined face. Glue the hat to the combined face; aligning at the top of the face.

6. Glue the hat trim piece to the combined face and attach the nose with a piece of foam adhesive square.

7. Using foam adhesive squares attach the combined face to the gift card holder base. Separate the fringe on the two pieces of scarf.

8. Glue the large scarf base just under the chin of the combined face on the card base.

9. Glue the medium sized scarf piece to the coordinating shape on the lower scarf.

10.Using a foam adhesive square, attach the smallest scarf piece to the coordinating shape on the combined scarf.

11. Flip the card base over. Glue the back of the hat to the card base; aligning at the top and sides. Glue the combined mittens into place.

12. Using foam adhesive squares, attach the hat pom pom and the tail to the backside.

13. Flip the card over. Tuck the hands into the slots on the front. 

14. I finished with enamel jewels to accentuate the eyes and a ribbon:)