Rainbow Heart Basket

Rainbow Heart Basket-JMR

This cute Rainbow Basket is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the colored rectangles to the rainbow base as shown. Fold score lines on the basket base.

3. Apply glue to the two top tabs on the basket base and attach to the center box.

4. Repeat for the lower two tabs; creating a box. 

5. Insert the combined rainbow into the slots on either side of the basket base.

6. Using foam adhesive squares, attach the largest heart to one side; aligning at the center of the basket base.

7. Using foam adhesive squares, attach two of the small hearts to either side of the large heart; aligning with the rainbow base.

8. Using foam adhesive squares, attach the middle sized heart. Repeat for the other side:)

Rainbow Heart Clouds

Rainbow Heart Clouds-JMR

This cute Rainbow is a sizable and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the colored curves to the rainbow base.

3. Using foam adhesive squares, attach the largest hearts to either side aligning with the rainbow base.

4. Using foam adhesive squares, attach two of the small hearts to either side of the large heart; aligning with the rainbow base.

5. Using foam adhesive squares, attach the middle sized heart to the center aligning with the rainbow base:)

Heart Pattern Wrap Box

Heart Pattern Wrap Box-JMR

Box size: W 3.5 x D 3.5 x H 1”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1. Cut Design. I used double sided cardstock.
2. Fold at score lines.
3. Apply glue to the top tabs and attach to the top panel and secure.
4. Repeat for the bottom tabs; creating a box. Repeat for the other box.
5. This is what it should look like:)
6. Apply glue to the top of the two edge hearts on the wrap piece.
7. Align the other side of the wrap; aligning the hearts.
8. This is what it should look like:)
9. Place the shallow box(lid) over top the deeper one (bottom box). Slide the wrap over the box.

Heart Pattern Hanging Tea Light Lantern

Heart Pattern Hanging Tea Light Lantern-JMR

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper and borrowed the picture tutorial from a past lantern project.)

2. Flip the two love lantern window pieces over. Glue the vellum paper to the window panels; centering around each of the cut out sections.

3. Fold all score lines.

4. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

6. This is what it should look like:)

7. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

8. Repeat for the rest of the top tabs until fully enclosed.

9.You can use a long utensil to help secure the tabs from the inside of the lantern.

10. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

11. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 

12. Repeat for the two top tabs creating a shallow box.

13. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

14.  Tuck the end tab into the slot creating a circular tube shape. Secure until dry.

15. Place the narrow circular ring piece and square piece over the tube shape you just created.

16. Apply glue to the outside of the tabs on the round side and secure downward to the round piece.

17. Apply glue to the top.

18. Secure the large ring to the top;centering it.

19. Insert flameless votive candle from the bottom.Flip this piece over so the Square side is up. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

20. Apply glue to the bottom and insert into the shallow square lantern base.

22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

23. Bottom view.

24. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. 

25. I finished this lantern with a ribbon:)

Robot Double Sticky Note Holder

Robot Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock. ( I substituted colors on the small antenna circle from grey to silver. Grey is shown in this tutorial and silver on the finished product image)

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Top view.

4.- 5. This is what the backside will look like:) Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side. Glue the silver head piece with cutouts to the coordinating solid head shape. Glue the two smaller square foot pieces to their coordinating larger square foot pieces; centering them. Glue the two hand pieces to the coordinating shapes on the robot base; centering them.

6. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using pieces of foam adhesive squares, attach the combined feet, the combined head, and the small antenna circle to the coordinating shapes on the robot base. Using a foam adhesive square, attach the heart to the center of the combined robot.

7. Attach the combined robot to the front of the sticky note holder with foam adhesive squares; centering it. 

8. Insert the back of a sticky note stack inside the slot provided. Insert the second sticky note stack into the backside pocket.

9. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Cupid Basket

Cupid Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 5” including handle - W. 8.5 including arrow

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock) 

2. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid white face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the larger diaper to the coordinating shape on the box base.

3. Fold the arrow feather pieces (2) at the score lines. Apply glue to one side of one feather and attach one side of the other feather to it. Attach to the coordinating shape on the brown arrow base.

4. Fold the box base at the score lines. Glue the combined skin colored faces to the combined black/white face. Glue the red heart to it’s coordinating shape on the arrow base.

5. Glue the hair, eyebrows, and eyeballs to the combined face.

6. Apply glue to the top two tabs on the box base and secure to the shape above. Curve the eyelashes and glue into place ( optional )

7. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box.

8. Glue the smaller diaper piece to the back outside of the box base; aligning at the top center.

9. Use a foam adhesive square to attach the combined feet to the back of the box base.

10. Insert the handle into the side slots on the box.  Repeat for the other side. 

11. Glue the center of the combined arrow to the front of the basket as shown. Use a foam adhesive square to attach the face to the front of the box base.

12. Use a foam adhesive square to attach the combined hands to the front of the box base. Finish with a ribbon:)

Valentines Bus Card

Valentines Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock.

2. Glue the smaller bus to the larger one. Fold the card base.

3. Glue the floral bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the three hearts; smallest on top:)

4. Glue the four solid circles ( two red and two white) to the inside of the open circles; centering them.

5. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the combined hearts to the center of the combined bus.

6. Use pieces of foam adhesive squares to attach the bottom silver bumper piece and side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. 

7. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it:)

Unicorn Candy Pocket

Unicorn Candy Pocket-JMR

Approximate size: W 3.75” X H 7.25”

Approximate Pocket size: W 2.5” X H 3.25”

The Unicorn Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, a gift card, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used doubled sided card stock)

2. Fold the tabs on the unicorn base. Apply glue to the tabs. Fold forward and secure to the unicorn shape of the base. Glue the black unicorn face to the large pink unicorn head with a mane; aligning at the ears. Glue the unicorn horn with cutouts to it’s matching solid base.

3. Use foam adhesive squares to attach the tail to the bottom of the unicorn base and the unicorn face with cutouts to the combined unicorn head; aligning at the ears.

4. Using foam adhesive squares, attach the small pink hair piece to the coordinating shape on the combined unicorn head base. Place two small pieces of foam adhesive square to the black horn section.

5. Place a tab of glue on the backside bottom of the combined horn piece and secure to the coordinating shape on the combined unicorn head. The foam adhesive piece you placed on the last step will help to secure it on.

6. Insert Ghirardelli® chocolate square, other snack sized candy, or gift card into the pocket. Tuck the Unicorn’s hands into the slots in the center.

7. Use a foam adhesive square to attach the heart:)

Love Bird Sticker Sheet

Love Bird Sticker Sheet-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Also see coordinating Love Birds Baby shower
Invitation Set, Love Birds Egg Card, Bird House Treat Box, and Love
Birds Sticker Sheet:)

Love Bird Egg Baby Shower Invitation Set

Love Bird Egg Baby Shower Invitation Set-JMR

This cute Love bird print and cut invitation set is perfect for baby showers. The set contains an Invitation (W 4” x H 5.5”), a storybook request card (W 4.25” x H 2.25”), and matching bookplate (W 4.25” x H 2.25”). This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Love Bird Egg Card

Love Bird Egg Card-JMR

Approximate size: W 4.25 x H 4.5”

This cute tri-panel love bird card opens from each side and is perfect for baby showers or for pregnancy announcements. This design is compatible with both 8X12 and 12X12 mats.

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Glue the heart shape to the center of the card base;centering it. Line up the girl and boy birds. Glue the tree libs to each bird making sure the limbs line up. Use foam adhesive squares to attach the wings to each bird.

3. Use a foam adhesive square to attach the egg; centering it. Attach the boy beak to the boy bird using a piece of foam adhesive square and glue the feet to each bird on top of the limbs.

4. Use a tiny piece of adhesive square to attach the small oval beak piece to the large beak base for the girl bird. Fold the score lines of the card base.

5. Glue the girl bird beak into place.

6. Use foam adhesive squares to attach the girl bird to the card base. 

7. Use foam adhesive squares to attach the boy bird to the card base.

8. I finished with a ribbon:)

Love Hanging Tea Light Lantern

 Love Hanging Tea Light Lantern-JMR

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the two love lantern window pieces over. Glue the vellum paper to the window panels; centering around each of the cut out sections.

3. Fold all score lines.

4. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

6. This is what it should look like:)

7. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

8. Repeat for the rest of the top tabs until fully enclosed.

9.You can use a long utensil to help secure the tabs from the inside of the lantern.

10. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

11. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 

12. Repeat for the two top tabs creating a shallow box.

13. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

14.  Tuck the end tab into the slot creating a circular tube shape. Secure until dry.

15. Place the narrow circular ring piece and square piece over the tube shape you just created.

16. Apply glue to the outside of the tabs on the round side and secure downward to the round piece.

17. Apply glue to the top.

18. Secure the large ring to the top;centering it.

19. Insert flameless votive candle from the bottom.Flip this piece over so the Square side is up. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

20. Apply glue to the bottom and insert into the shallow square lantern base.

22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

23. Bottom view.

24. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. 

25. I finished this lantern with a ribbon:)