Pumpkin 3D Stand Up

Pumpkin 3D Stand Up- JMRush 

Approximate size: W 2.75” X H 3.5”

This cute pumpkin decoration stands independently. This design is compatible with both 8X12 and 12X12 mats.  

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) 

2. Fold each of the 12 identical pumpkin shapes at the score lines.

3. -5. Apply glue to the backside of one side of the folded identical pumpkin shapes. Line up the back of another identical pumpkin shape and align at the edges. Continue this step until 6 the pumpkin shapes have been joined.

6.-8 Repeat this process for the remaining 6 identical pumpkin shapes ( you will have two groupings) Apply glue to the backside of one of the combined pumpkin shapes and attach to the full pumpkin silhouette with a stem; aligning at the bottom edge:) Repeat this process for the remaining pumpkin shape grouping on the backside of the full pumpkin stem silhouette.

Winter Birdhouse Card

Winter Birdhouse Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (Be careful not to scrap the little circles that are grouped with two of the groupings:)

2. Fold the card base at the score lines. Glue the pinecone cut out pieces to their coordinating pinecone solid bases.  Glue the small circle to the larger one; centering it. Flip the smaller birdhouse group (with cut outs) over ( pretty side down).  Attach pieces of foam adhesive squares to it and to the triangular roof shaped birdhouse top.

3. Flip the smaller birdhouse back over and attach it to the larger one; centering it. Flip the smaller triangular roof piece back over and attach it to the larger one; aligning at the top and the outside edges. Flip this combined triangular roof piece over ( pretty side down) and attach foam adhesive squares. Flip the combined circle piece over and attach a piece of foam adhesive square to it.

4. Flip the combined triangular roof piece over and attach it to the combined base piece. Flip the combined birdhouse piece over and attach it to the combined base. Flip the combined circle piece over and attach it to the front of the combined birdhouse. Curve the pine needles and combined pinecones as you like. Glue two of the pine needle sets to the top of the combined birdhouse. Flip the combined pinecones over (pretty side down) and attach a foam adhesive square to each one. 

5. Flip the combined pinecones back over and attach to the combined birdhouse.
6. Glue the other two sets of pine needles to the combined birdhouse. I finished with a ribbon and enamel dots. Glue the birdhouse to the front of the card base:)

Acorn Ornament Gift Tag

Acorn Ornament Gift Tag- JMRush 

Approximate size: W 5.25” X H 3”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Glue the acorn top, acorns, and leaves to the acorn grouping silhouette that coordinates with the acorn circular hanger base.

3. Flip the acorn circular hanger base over (pretty side down). Center and glue the other acorn grouping silhouette to the base. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament) Flip this combined piece back over (pretty side up).

4. Attach the combined acorn grouping to the combined base with adhesive foam squares. I finished with a ribbon and enamel dot:)

Winter Birdhouse Ornament Gift Tag

Winter Birdhouse Ornament Gift Tag- JMRush 

Approximate size: W 4.5” X H 5.75”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (Be careful not to scrap the little circles that are grouped with two of the groupings:)

2. Flip the Base piece (with a circular hanger) over ( pretty side down). Center and glue the solid birdhouse shape to the base. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament) Flip this combined piece back over ( pretty side up).  Glue the pinecone cut out pieces to their coordinating pinecone solid bases.  Glue the small circle to the larger one; centering it. Flip the smaller birdhouse group (with cut outs) over ( pretty side down).  Attach pieces of foam adhesive squares to it and to the triangular roof shaped birdhouse top.

3. Flip the smaller birdhouse back over and attach it to the larger one; centering it. Flip the smaller triangular roof piece back over and attach it to the larger one; aligning at the top and the outside edges. Flip this combined triangular roof piece over ( pretty side down) and attach foam adhesive squares. Flip the combined circle piece over and attach a piece of foam adhesive square to it.

4. Flip the combined triangular roof piece over and attach it to the combined base piece. Flip the combined birdhouse piece over and attach it to the combined base. Flip the combined circle piece over and attach it to the front of the combined birdhouse. Curve the pine needles and combined pinecones as you like. Glue two of the pine needle sets to the top of the combined birdhouse. Flip the combined pinecones over (pretty side down) and attach a foam adhesive square to each one. 

5. Flip the combined pinecones back over and attach to the combined birdhouse.

6. Glue the other two sets of pine needles to the combined birdhouse. I finished with a ribbon and enamel dots:)

Pinecone Gift Tag

Pinecone Gift Tag- JMRush 

Approximate Card size: H 4.” X W 2.5”

This design is compatible with both 8X12 and 12X12 mats.

This design can be used as a gift tag or ornament.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. 

2. Flip the pinecone base (circular hanger at the top) over (pretty side down). Glue the solid plain pinecone to the back. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament)

3. Flip the tag back over (pretty side up) and glue the cut out pinecone to the front. 

4.-5. Curve the pine needles as you like and glue them at the top of the pinecone.

6. I finished with a ribbon and an enamel dot:)

Joy Gift Tag

Joy Gift Tag- JMRush 

Approximate Card size: H 4.25” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

This design can be used as a gift tag or ornament.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (There is a large “Joy” script missing from the beginning of this tutorial. It appears in image 5.)

2.Glue the smallest script to the medium sized script. Glue the panel with pinecone cut outs to the solid base with a circular hanger at the top.

3. Flip the combined tag over and glue the solid plain panel to the back. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament)

4.-5. Flip the tag back over (pretty side up). Curve the pine needles as you like and glue them above the pinecone cut outs. Two sets on each pinecone. I attached three small red enamel dots on top of each of the pinecone needle/pinecones.

6. Glue the combined “joy” script to the largest script. 

7. Use pieces of foam adhesive squares to attach the script to the front of the tag and finish with a ribbon:)

Indian Girl Hug Treat Box

Indian Girl Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 3.5” X H 5.25” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full indian head with eye cut outs to the solid indian head base. Glue the indian face with large eye openings to the indian face base that has smaller eye openings.  Glue the two hand pieces to the cuff base pieces. Glue the feather to the combined head piece.

3. Glue the combined indian face piece to the combined indian head piece. Fold the score lines on the box base. Glue the head band to the combined indian head.

4. Glue the collar trim piece to the shirt piece. Glue the combined shirt piece to the box base. Glue the combined indian head to the box base.

5. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

6. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

7. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

8. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip. I added enamel dots to accentuate the indian’s eyes. Glue the fringe piece on the front of the box:)

Indian Boy Hug Treat Box

Indian Boy Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 3.5” X H 5.25” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full indian head with eye cut outs to the solid indian head base. Glue the indian face with large eye openings to the indian face base that has smaller eye openings.  Glue the two hand pieces to the cuff base pieces. Glue the feathers to the hair piece.

3. Glue the combined indian face piece to the combined indian head piece. Glue the indian hair to the combined combined head piece.

4. Fold the score lines on the box base. Glue the collar trim piece to the shirt piece. Glue the head band to the combined indian head.

5. Glue the combined shirt piece to the box base.  Glue the combined indian head to the box base.

6. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

7. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

8. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

9. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip. I added enamel dots to accentuate the indian’s eyes. Glue the fringe piece on the front of the box:)

Pilgrim Boy Hug Treat Box

Pilgrim Boy Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 4.5” X H 4.75” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full pilgrim head with eye cut outs to the slightly larger one with a collar shape on the bottom. Glue the pilgrim face with large eye openings to the pilgrim face base that has smaller eye openings. Glue the cuff pieces with circle cut outs to the slightly larger cuff base pieces; aligning on the smallest edge. Glue the hat dimension pieces to the hat piece.

3. Glue the combined pilgrim face pieces to the combined pilgrim head piece. Glue the pilgrim hair to the combined combined head piece. Fold the score lines on the box base. Glue the large open rectangular buckle piece to the rectangle belt piece. Glue the hat trim piece to the combined hat. Glue the small open rectangular buckle to the combined hat.

4. Glue the combined pilgrim head to the box base. Glue the combined hat to the pilgrim combined box base. I used a small piece of foam square adhesive to attach the brim of the hat and added enamel dots to the pilgrim’s eyes. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

5. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

6. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

7. Glue the hands to the coordinating shapes on the box base hands. Glue the cuff pieces into place. The hands tuck into the slots of the center strip.  Glue the combined belt piece on the front of the box:)

Pilgrim Girl Hug Treat Box

Pilgrim Girl Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 3.75” X H 5” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full pilgrim head with eye cut outs to the slightly larger one with a scalloped bottom. Glue the pilgrim face with large eye openings to the pilgrim face base that has smaller eye openings.  Glue the two hand pieces to the cuff base pieces with scalloped edges.

3. Glue the combined pilgrim face pieces to the combined pilgrim head piece. Glue the pilgrim hair to the combined combined head piece. Fold the score lines on the box base.

4. Glue the combined pilgrim head to the box base. Glue the larger half oval shaped hat piece to the combined pilgrim on the box base. 

5. I used a small piece of foam square adhesive to attach the brim of the hat and added enamel dots to the pilgrim’s eyes.

6. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

7. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

8. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

9. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip. Glue the apron piece on the front of the box:)

Pumpkin Pie Grouping

Pumpkin Pie Grouping- JMRush 

These designs can be used for scrapbook pages, gift bags, or for fall themed crafting projects. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

https://www.jamieandjenn.com/thanksgiving/

1. Cut design pieces.

2. Match up the two largest scalloped circle pieces. (The shapes are irregular so you may need to turn them to get the scallops to match up). Center the smaller scalloped circle and glue it on top the larger one. Center and glue the smaller lettering to the larger lettering.

3. Match up the whip topping pieces with cut outs (3) to their solid base pieces. Center and glue. I did not glue the center of the largest round whip topping so that it cold be pulled up to show dimension. Glue the smaller solid circle to the the center of the larger full circle piece. Glue the slice of pie cut out piece to the solid slice of pie piece. Glue the scalloped open  oval piece to the coordinating larger scalloped open oval piece.

4. Center and glue the third smallest scalloped circle to the combined scalloped circle. Use foam adhesive squares to attach the combined whip cream pieces to the combined slice of pie, combined circle pieces, and to the oval side view pie piece. Glue the smaller spatula to the larger one.

5. Use foam adhesive pieces to attach the combined pumpkin pie full circle

to the combined scalloped circle piece and pieces of adhesive squares to attach the combined oval scalloped piece to the larger oval piece. Glue the handle and the triangle to the spatula. Glue the narrow triangle piece to the top of the slice of pie combined piece. Tuck the side view pecan cut out piece into the combined side view pie pan. Apply pieces of foam adhesive squares to it’s back and glue to the perimeter of the pan on the backside. Center and glue to the solid side view base:)

Pecan Pie Grouping

Pecan Pie Grouping- JMRush 

These designs can be used for scrapbook pages, gift bags, or for fall themed crafting projects. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

You can purchase the SVG and Cricut file here:

https://www.jamieandjenn.com/thanksgiving/

1. Cut all design pieces. ( There is an additional black side view pie piece missing from the beginning of this tutorial. It appears in image 5.)
2.  Match up the two largest scalloped circle pieces. (The shapes are irregular so you may need to turn them to get the scallops to match up). Center the smaller scalloped circle and glue it on top the larger one. Center and glue the smaller lettering to the larger lettering. Glue the smaller spatula to the larger one. 

3. Center and glue the third smallest scalloped circle to the combined scalloped circle. Use foam adhesive squares to attach the pecan cut out pie (full circle) to it’s coordinating solid base. Glue the scalloped oval piece to the coordinating larger scalloped oval piece. Glue the slice of pie piece to it’s solid base coordinating piece. Glue the pecans to their coordinating solid base piece.

4. Use foam adhesive pieces to attach the combined pecan pie full circle

to the combined scalloped circle piece and pieces of adhesive squares to attach the combined oval scalloped piece to the larger oval piece. Glue the handle and the triangle to the spatula. Glue the narrow triangle piece to the top of the slice of pie combined piece. Glue the combined pecan piece to the top of the combined slice of pie piece. Glue the whip topping to it’s coordinating solid base shape and attach it to the slice of pie combined piece with a piece of adhesive foam square.

5. Tuck the side view pecan cut out piece into the combined side view pie pan. Apply pieces of foam adhesive squares to it’s back and glue to the perimeter of the pan on the backside. Center and glue to the solid side view base.

6. Like so:)

Leaf 3D 4x6 Photo Frame

Leaf 3D 4x6 Photo Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

Fits 4X6 photos.

This easy to construct, two piece frame can be used vertically or horizontally and features a fold out stand and a decorative leaves. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut out design piece. ( I used double sided card stock)

2. Insert the tabs of the frame base into the frame base slots.

3. Image of step 2 completed.

4.-5. Align and center the pieces. On the backside. Apply glue to the inside of the tabs and secure into place.

6. Pre-fold all scored lines on the edges of the frame folding them inward toward the center. Fold all score lines on the flower pieces. For each set of the flowers- fold one in and one out.

7. Starting on the right side of the frame base, apply hot glue to the very edge. 

8.  Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.

9. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.

10.-15. Repeat this steps for each of the frame sides. Be careful to only apply glue to the edge of each side so that the stand leg on the base of the frame will have mobility later and so inserting your photo is easy:)

16.-18. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure. Repeat for each tab.

19. Match up the leaves and glue the smaller leaves to the larger ones.

20. Curve your combined leaves as you like.

21. Insert your photo by sliding it into place. The sides of the frame will lift up a bit to ease the photo insertion.

22.-23. Glue the largest combined leaves in the corners of the frame. Note: This frame can be used horizontal ( as shown) or vertical. Use foam adhesive squares to attach the middle sized leaves. I used a dab of glue on the stem to secure the bottom of the middle sized leaves. Glue the smallest combined leaves to the frame:)

Give Thanks Script

Give Thanks Script- JMRush 

The Give Thanks Script can be as a single script or stacked to create dimension. This word art can be used for scrapbook pages, gift bags, or for fall themed crafting projects. 

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Pumpkin Patch Lantern (Flameless)

Pumpkin Patch Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7” (H 7.74” with Circle Hanger)

This Flameless lantern features an Autumn Pumpkin Patch design which is wrapped around each of the four sides. A layered transparent frosted effect is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock and vellum paper) (These images show three decorative leaves- I ended up only using two.)

2. Flip the two lantern pieces over ( pretty side down) and fold the score lines.

3. Center the two lantern body pieces. Apply glue to the backside of the right side tab on the left lantern body piece. Attach to the other lantern piece making sure that the bottoms align (joining the two body pieces). 

4. Glue the rectangular vellum pieces to the open areas of the lantern body- centering each rectangle with the open window area of the lantern body. 

5.- 6.Glue the Circle shaped hangers together. ( Make sure the stems of these piece remain separate) Curve the two decorative leaves as you like.

7. Glue one of the stems of the circle hanger combined piece to the inside of the top of the first window panel. (The other stem will be glued inside the lantern later)

8. Flip the lantern over ( pretty side up). Glue the backside of the single scene panels to the coordinating shapes on the lantern base.

9. Apply glue to the top of the side long tab on the very left side. Secure the long side tab to the other side creating a box.

10. Apply glue to the top tab with the circle hanger and secure it to the triangular panel to it’s left side.

11.-12. Repeat for the next tab. Continue applying glue to the top tabs until the top is complete. Apply glue to the other side of the circle hanger piece and secure to the opposite side inside the lantern.

13. Fold the score lines on the lantern square base. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.

14. Repeat for the bottom two tabs creating a shallow box.

15. Place a flameless candle inside and the lantern top in it’s base.( I used a W 1.5” x H 6.5” pillar flameless candle.)

16. I finished with a ribbon on top and used foam adhesive squares to attach the two decorative leaves:)

Pumpkin Contour Card

Pumpkin Contour Card-JMRush

Approximate size: W 5.5 “x H 4.25”

The Pumpkin Contour Card features a beveled Pumpkin design that reads “Thankful” on the front cover and contains a hidden gift card/message/picture holder section on the inside. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

 1.Cut design pieces. (I used double sided card stock) 

2. Fold the card base along the score lines. Apply glue to the backsides of the rounded pumpkin shape and secure to the pumpkin shape with the leaf attached.

3. Apply glue to the backsides of the two side tabs on the card base and secure to the upper panel. Glue the “Thankful” word to the combined pumpkin piece.

4. Curve the leaf as preferred and glue the center of the backside of the stem to the combined pumpkin.

5.-6. Curve the combined pumpkin. Fold the top of the card down and insert the tabs of the combined pumpkin into to the slots on the card base front.

7. Make sure the design on the front is centered as you like and then glue the tabs of the combined pumpkin on the inside of the card.

8. Apply glue to the inside of the top flap of the card base and secure the rectangular shaped piece. Align at the top and center ( top side will show through the front of the card). There is a small sliver of the shape that will show at the bottom of the front of the card base.

9. Insert gift card or pictures. 

10. I finished with a ribbon and an enamel dot:)

Rib Cage Gift Card Holder

Rib Cage Gift Card Holder-JMRush

Approximate size: W 5.25 x H 4.”

The Rib Cage Card features a front cover of ribs that open at the center. This file contains a hidden gift card section on the inside and two spiders. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock) (There are two spiders in this file. The tutorial only shows one)

2. Fold the card base along the score lines. Apply glue to the backsides of the two bottom tabs and secure to the upper panel.

3. Center and glue the inside panel.

4. Fold the side panels to the center and glue the coordinating ribs to each side. Curve the spiders legs as preferred and attach with a piece of foam adhesive square. I used an adhesive jewel on each spider body to accentuate the shape.

5. Insert gift card.

6. :)