Layered Tree

Layered Tree-JMR

Approximate size: H 2.75” X W 1.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the green tree with cut outs to the solid green tree.
3. Glue the combined tree to the solid brown tree silhouette:)

 

Stitched Bird Card

Stitched Bird Card-JMRush

Card size: H 4.25" X W 5.5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces.
2. Fold the card at the score lines. Glue the smaller bird wing to the larger one; centering it. Curve the flowers and leaves as you like.
3. Using foam adhesive squares, attach the smaller bird silhouette to the larger solid bird base; centering it. Glue the beak and feet to the bird base.  Apply glue to the backside of each flower ( just to the inside flower shape) and attach to it’s coordinating shape. ( You may want to make sure you have aligned each flower with it’s base so they are aligned properly. The outside petals should remain free).
4. Use a foam adhesive square on the backside of the combined wing piece at the separated side and glue at the rounded side. Attach to the combined bird base; aligning at the separated wing end.
5. Glue the tree branch to the card base.
6. Glue the combined bird to the card base.
7. Attach the combined flowers using foam adhesive squares. Glue the leaves underneath the combined flowers. I finished by adding adhesive dots to accentuate the bird’s eye and the center of the flowers:)

Acorn Ornament Gift Tag

Acorn Ornament Gift Tag- JMRush 

Approximate size: W 5.25” X H 3”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Glue the acorn top, acorns, and leaves to the acorn grouping silhouette that coordinates with the acorn circular hanger base.

3. Flip the acorn circular hanger base over (pretty side down). Center and glue the other acorn grouping silhouette to the base. (This is optional and is used for writing if you will be using this for a gift tag and not an ornament) Flip this combined piece back over (pretty side up).

4. Attach the combined acorn grouping to the combined base with adhesive foam squares. I finished with a ribbon and enamel dot:)

2 Panel Tree Card

2 Panel Tree Card / Invitation- JMRush

Approximate size: W 4.25” X H 5.5”

This two panel card opens in the middle, comes with a insert card, and fits a A2 envelope. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Working on my daughter's wedding invitations! I am loving this beautiful paper from CutCardStock.com. I am using the Stardream Metallic in Lapiz Lazuli, Classic Linen Natural for the insert and envelopes, and CTI Glama Natural Translucent vellum.
You can find this beautiful great quality paper here:http://www.cutcardstock.com

Cherry Blossom Lantern (Flameless)

Cherry Blossom Lantern (Flameless)-JMRush

Lantern size: W 3 x D 3 x H 7”

This Flameless lantern features cut outs and when vellum paper is used, a layered transparent frosted effect is created. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. ( I used double sided card stock and used Vellum paper for the top layer of flower petals and rectangle window panels

2. Flip the two lantern pieces over ( pretty side down) Fold the score lines of the lantern body. 

3. Glue the rectangular vellum pieces to the open areas of the lantern body- centering each rectangle with the open window area of the lantern body.

4.-5. Center the two lantern body pieces. Apply glue to the backside of the right side tab on the left lantern body piece. Attach to the other lantern piece making sure that the bottoms align (joining the two body pieces).

6. Glue the open rectangle mats to the top of the rectangle tree panels, centering each one.

7. Glue the combined tree rectangles to the front of the lantern body, centering each one.

8.-9. Glue the circular hangers together. ( Make sure the stems of this piece remain separate) Flip the combined lantern body over ( pretty side down) Glue one of the stems to the inside of the top of the third from the left window panel. (The other stem will be glued inside the lantern later)

10. Apply glue to the top tab and to the side long tab on the very right side. Secure the long side tab to the other side creating a box.

11. This is what it should look like:)

12.-14. Applying glue to one top tab at a time, begin to secure the top tabs to the inside of the next angled triangle.  The other Circular hanger stem will be glued to the inside of the opposite side of the lantern.

15. This is what the completed top will look like:)

16. Fold the score lines on the lantern square base.

17. Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides.

18. Repeat for the bottom tabs creating a shallow box.

19. Curve the small stamens -insides of the flowers- (small petal design with a hole in the center:) so that the petals are higher than the center.   Color should be on the inside of each piece. Glue the bud pieces (pieces with three points) to the bud base (piece with three curves at the top).

20. Attach small pieces of foam adhesive squares to the very center of the flower bases. Attach the vellum flower pieces to the flower bases that you already prepped with foam adhesive squares. Center each one and off set the petals.

21. Glue the centers of the curved small stamen pieces to the center of the vellum flower petals.

22. Glue the combined flowers and buds to the branches.

23. Place a flameless candle inside and the lantern top in it’s base. I finished with jewels in the center of several of the flowers on each side and a ribbon on top:)

Lilac Design Cut Card

Lilac Design Cut Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats and can be used horizontally or vertically.

1.Cut design pieces.

2. Fold the card base. Glue the large solid flower silhouette (green) to the front of the card.

3. Glue the cut out flower piece (dark purple) to it's matching base ( light purple).

4. Attach the combined cut out flower piece to the large solid flower silhouette on the front of the card using foam adhesive squares.

5. Finish with enamel dots to decorate the center of the flowers.

Lilac Card

Lilac Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. ( I used double sided card stock)

2. Fold the card base. Glue the large flower branch silhouette to the front of the card.

3. Glue the stem to the top of the card.

4. Glue the leaves to the top of the card.

5. - 7. Glue the flower petals to the front of the card. I started with the the 7 lightest colored petals then glued the shade darker (save a few of each color section to curve and glue later) Curve the darkest ( largest ) flower section so that the center is down and the tips of the petals are up. Curve the remaining few that you saved from each color section. 

8. Glue the bottom centers of the largest flower section and attach them to the card front. 

9. Glue the remaining curved flowers to the front of the card.

10. Finish by placing adhesive jewels in the center of several of the flowers:)

Cherry Blossom Card

Cherry Blossom Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces. (I used Vellum paper for the top layer of petals)
2. Fold the card base. Glue the branch designs to the front of the card. Curve the small stamens -insides of the flowers- (small petal design with a hole in the center:) so that the petals are higher than the center.   Color should be on the inside of each piece. Glue the bud pieces (pieces with three points) to the bud base (piece with three curves at the top). Attach small pieces of foam adhesive squares to the very center of the flower bases.
3. Glue the centers of the curved small stamen pieces to the center of the vellum flower petals.
4. Attach the combined flower pieces to the flower bases that you already prepped with foam adhesive squares. Center each one and off set the petals.
5. Glue the combined buds to the branches.
6. Use foam adhesive squares to attach three of the combined flowers to the branches. ( see finished photo they are the flowers with gems in the centers). Use glue to attach the rest of the combined flowers.
7. Finish by placing adhesive gems in the center of three of the flowers. ( I used a brown sharpie to color the pink gems to get the desired color:)

Pinecone 3D Gift Tag

Pinecone 3D Gift Tag-JMRush

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines.

3.Apply glue to the front of the circle design piece. Glue it to the back of your Gift Tag base. (This piece is included in case you use double sided paper and need a plain surface to write on:)

4. Apply glue to the right hand backside of one of your pinecones.

5. Attach the left backside of the next pinecone.

6. Repeat until all pinecones are combined.

7. Apply glue to the backside of the combined 3D pinecone section and glue to the base.

8. Glue on the leaves and shape them as you like.

8. Finish with a ribbon and adhesive dot:)

Tree Cone Container

Tree Cone Container-JMRush

Basket size: W 4" X  H 2.25”

Tree Size (approximate): W 6” X H 6.5”

This Tree Cone Treat container can be filled with goodies for a gift or used as a center piece for your Christmas or Winter celebrations. 20” of 1/4” ( or smaller width) ribbon or twine is needed to complete the basket. This design is compatible with 8x12 or 12X12 mats.