Pumpkin 3D Stand Up

Pumpkin 3D Stand Up- JMRush 

Approximate size: W 2.75” X H 3.5”

This cute pumpkin decoration stands independently. This design is compatible with both 8X12 and 12X12 mats.  

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) 

2. Fold each of the 12 identical pumpkin shapes at the score lines.

3. -5. Apply glue to the backside of one side of the folded identical pumpkin shapes. Line up the back of another identical pumpkin shape and align at the edges. Continue this step until 6 the pumpkin shapes have been joined.

6.-8 Repeat this process for the remaining 6 identical pumpkin shapes ( you will have two groupings) Apply glue to the backside of one of the combined pumpkin shapes and attach to the full pumpkin silhouette with a stem; aligning at the bottom edge:) Repeat this process for the remaining pumpkin shape grouping on the backside of the full pumpkin stem silhouette.

Pumpkin Pie Grouping

Pumpkin Pie Grouping- JMRush 

These designs can be used for scrapbook pages, gift bags, or for fall themed crafting projects. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

https://www.jamieandjenn.com/thanksgiving/

1. Cut design pieces.

2. Match up the two largest scalloped circle pieces. (The shapes are irregular so you may need to turn them to get the scallops to match up). Center the smaller scalloped circle and glue it on top the larger one. Center and glue the smaller lettering to the larger lettering.

3. Match up the whip topping pieces with cut outs (3) to their solid base pieces. Center and glue. I did not glue the center of the largest round whip topping so that it cold be pulled up to show dimension. Glue the smaller solid circle to the the center of the larger full circle piece. Glue the slice of pie cut out piece to the solid slice of pie piece. Glue the scalloped open  oval piece to the coordinating larger scalloped open oval piece.

4. Center and glue the third smallest scalloped circle to the combined scalloped circle. Use foam adhesive squares to attach the combined whip cream pieces to the combined slice of pie, combined circle pieces, and to the oval side view pie piece. Glue the smaller spatula to the larger one.

5. Use foam adhesive pieces to attach the combined pumpkin pie full circle

to the combined scalloped circle piece and pieces of adhesive squares to attach the combined oval scalloped piece to the larger oval piece. Glue the handle and the triangle to the spatula. Glue the narrow triangle piece to the top of the slice of pie combined piece. Tuck the side view pecan cut out piece into the combined side view pie pan. Apply pieces of foam adhesive squares to it’s back and glue to the perimeter of the pan on the backside. Center and glue to the solid side view base:)

Pumpkin Contour Card

Pumpkin Contour Card-JMRush

Approximate size: W 5.5 “x H 4.25”

The Pumpkin Contour Card features a beveled Pumpkin design that reads “Thankful” on the front cover and contains a hidden gift card/message/picture holder section on the inside. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

 1.Cut design pieces. (I used double sided card stock) 

2. Fold the card base along the score lines. Apply glue to the backsides of the rounded pumpkin shape and secure to the pumpkin shape with the leaf attached.

3. Apply glue to the backsides of the two side tabs on the card base and secure to the upper panel. Glue the “Thankful” word to the combined pumpkin piece.

4. Curve the leaf as preferred and glue the center of the backside of the stem to the combined pumpkin.

5.-6. Curve the combined pumpkin. Fold the top of the card down and insert the tabs of the combined pumpkin into to the slots on the card base front.

7. Make sure the design on the front is centered as you like and then glue the tabs of the combined pumpkin on the inside of the card.

8. Apply glue to the inside of the top flap of the card base and secure the rectangular shaped piece. Align at the top and center ( top side will show through the front of the card). There is a small sliver of the shape that will show at the bottom of the front of the card base.

9. Insert gift card or pictures. 

10. I finished with a ribbon and an enamel dot:)

Pumpkin Treat Box

Pumpkin Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has four optional Jack-O-Lantern faces that can be used, has an attached lid, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score line. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
3. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
4. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
5. Tuck the tab into the slot in the back.
6. Glue the two stem leaf pieces together on the central stem part only and making sure that the half circle shapes at the bottom and leaves are still separate.
7. Curl the leaves as you like.
8. Glue the two small stem designs to each side of the combined stem/leaf piece.
9. Insert the combined stem/leaf piece into the slot on the top of the treat box.
10. Apply glue to the inside of the leaf/stem small tabs and secure to the top of the lantern. Hold until secure.
11. Apply glue to the backside of the small circle piece.
12. Cover the tabs on the inside of the lid portion of the treat box. Finish by adding a ribbon or twine and apply one of the four Jack-O-Lantern faces if desired.

Pumpkin Lantern (Flameless)

Pumpkin Lantern (Flameless)-JMRush

Approximate size: W 4.50” X D 4.50” X H 7”

When vellum paper is used, an opaque lantern effect is created on this five sided lantern. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock)

2. Flip lantern pieces over ( pretty side down). Fold score line up. Align the lantern pieces so that the upper tabs are on the upper right side. Apply glue to the backside of the long side tabs and secure the three lantern pieces together.

3. Apply glue to the very edges of the rectangular vellum pieces. Align over each open window of the lantern panels. Secure.

4. Glue the two stem leaf pieces together on the central stem part only and making sure that the half circle shapes at the bottom and leaves are still separate.

5. Glue the two small stem designs to each side of the combined stem/leaf piece. Curl the leaves as you like.

6. Apply glue to the top right side tab of the third panel top and attach to the inside of the next triangular top to the right. Repeat for the next tab.

7. Repeat for the next tab on the fourth panel.

8. Repeat for the tab on the first panel.

9. Repeat for the last two tabs which encloses the top of your lantern.

10. This is what it should look like.

11. Apply glue to the long side tab on the last panel and attach to the panel to the left, creating a enclosed pentagon box shape.

12. Apply glue to the inside of the leaf/stem small tabs and secure to the top of the lantern. Hold until secure.

13. Fold the score lines on the lantern base.

14. Apply glue to the small tabs on the lantern base and secure to the inside of the rectangular shape to the left. 

15. Repeat for all tabs.

16. This is what it should look like.

17. Place a flameless candle in the center of the lantern base. (I used a 3” W x 4” H flameless color changing candle) The lantern top is placed over the top. I finished with a ribbon.

Pumpkin Flip Top Box

Pumpkin Flip Top Box-JMRush

Approximate size: W 4" X  H 5.25” X D 1.5”

The Pumpkin Flip Top Box has a top that is attached to the box base on one side and a tab closure on the other side. This file is great for party favors or to use as a centerpiece for your Autumn parties. This design is compatible with 8x12 or 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock)

2. Flip Box base over ( pretty side down) just as image shows. Fold score lines up on the box base pieces.

3. Align the box base pieces so that the larger pieces is on the left and has the tab on the lower left and the smaller piece is on the right and has the small indented tab on the upper right. Apply glue to the backside of the long side tab on the right side smaller box base piece. Align with the edge of the other box base and secure. ( You want the tab to be on the inside of your box).

4. Apply glue to the small side tabs- one on the top and one on the bottom ( where my thumb and finger are in the picture). Secure to the rectangular tab shapes creating 90 degree angles.

5. Apply glue to the backside of the tabs closest to the outside the left box base- one on the top and one on the bottom ( where my thumb and finger are pointing). Secure to the tab directly below for the top tab and directly above for the lower tab.

6. Apply glue to the backside of the tabs closest to the center- one on the top and one on the bottom of the right side box base. Secure to the center strip.

7. Apply glue to the outer sides of the 90 degree angles on the outside of the right bottom section. Secure to the inside of the left box base sections creating a box and lining up the edges.

8. Apply glue to the outer sides of the 90 degree angles on the outside of the right upper section. Secure to the inside of the left box base

9. Your box is now complete:) Tuck the closure tab into the slot in the bottom section to close.

10. Glue the two stem leaf pieces together on the stem part only ( make sure that the half circle tabs  at the bottom and leaf shapes are still separate.)

11. Glue the two small stem designs to each side of the combined stem/leaf piece. Curl the leaves as you like and insert the half circle tabs of the combined stem piece into the top of your box. Glue the pumpkin design pieces to the front of your box as shown.

12. Inside the top of the box base, apply glue to outer side of the two half circle tab pieces. Secure to the inside of the top of the box base.

13.  Finish by adding a ribbon. Fill with goodies and enjoy:)

Pumpkin Envelope Pouch

Pumpkin Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Pumpkin pouch with your favorite candy bar or use it as a cutlery holder for your Halloween/Thanksgiving party. Use this Pumpkin plain or choose from the four mix and match Jack-O-Latern faces included in this file. The pouch’s super easy construction makes it perfect for Halloween  or Thanksgiving parties. This design is compatible with 8x12 or 12X12 mats.

Pumpkin Box with handle

Pumpkin Box with Handle-JMRush

Finished Box Dimensions including handle (approximate): 

W 3” x H 5.5” x D 2.5”

This design is compatible with 8x12 or 12X12 mats.

Pumpkin 3D 4X6 Frame

Pumpkin 3D 4x6 Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This Autumn themed frame has a intricate cut Pumpkin/leaf design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file (excluding your pictures;) This design requires a 12X12 cutting mat and contains a print and cut feature for the pumpkin and leaves. The pumpkin and leaves can also be used separately.

1. Cut out all design pieces.
2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later and so that inserting your photo is easy:)
4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
6. Repeat this steps for each of the frame sides.
7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
8. Repeat for each tab.
9. Place the print and cut Pumpkins and leaves on top of the base frame and glue into place.
10. (I used foam adhesive squares to adhere them into place on the frame to give them dimension. Happy Crafting:)