Pumpkin 3D Stand Up

Pumpkin 3D Stand Up- JMRush 

Approximate size: W 2.75” X H 3.5”

This cute pumpkin decoration stands independently. This design is compatible with both 8X12 and 12X12 mats.  

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) 

2. Fold each of the 12 identical pumpkin shapes at the score lines.

3. -5. Apply glue to the backside of one side of the folded identical pumpkin shapes. Line up the back of another identical pumpkin shape and align at the edges. Continue this step until 6 the pumpkin shapes have been joined.

6.-8 Repeat this process for the remaining 6 identical pumpkin shapes ( you will have two groupings) Apply glue to the backside of one of the combined pumpkin shapes and attach to the full pumpkin silhouette with a stem; aligning at the bottom edge:) Repeat this process for the remaining pumpkin shape grouping on the backside of the full pumpkin stem silhouette.

Indian Girl Hug Treat Box

Indian Girl Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 3.5” X H 5.25” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full indian head with eye cut outs to the solid indian head base. Glue the indian face with large eye openings to the indian face base that has smaller eye openings.  Glue the two hand pieces to the cuff base pieces. Glue the feather to the combined head piece.

3. Glue the combined indian face piece to the combined indian head piece. Fold the score lines on the box base. Glue the head band to the combined indian head.

4. Glue the collar trim piece to the shirt piece. Glue the combined shirt piece to the box base. Glue the combined indian head to the box base.

5. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

6. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

7. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

8. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip. I added enamel dots to accentuate the indian’s eyes. Glue the fringe piece on the front of the box:)

Indian Boy Hug Treat Box

Indian Boy Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 3.5” X H 5.25” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full indian head with eye cut outs to the solid indian head base. Glue the indian face with large eye openings to the indian face base that has smaller eye openings.  Glue the two hand pieces to the cuff base pieces. Glue the feathers to the hair piece.

3. Glue the combined indian face piece to the combined indian head piece. Glue the indian hair to the combined combined head piece.

4. Fold the score lines on the box base. Glue the collar trim piece to the shirt piece. Glue the head band to the combined indian head.

5. Glue the combined shirt piece to the box base.  Glue the combined indian head to the box base.

6. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

7. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

8. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

9. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip. I added enamel dots to accentuate the indian’s eyes. Glue the fringe piece on the front of the box:)

Pilgrim Boy Hug Treat Box

Pilgrim Boy Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 4.5” X H 4.75” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full pilgrim head with eye cut outs to the slightly larger one with a collar shape on the bottom. Glue the pilgrim face with large eye openings to the pilgrim face base that has smaller eye openings. Glue the cuff pieces with circle cut outs to the slightly larger cuff base pieces; aligning on the smallest edge. Glue the hat dimension pieces to the hat piece.

3. Glue the combined pilgrim face pieces to the combined pilgrim head piece. Glue the pilgrim hair to the combined combined head piece. Fold the score lines on the box base. Glue the large open rectangular buckle piece to the rectangle belt piece. Glue the hat trim piece to the combined hat. Glue the small open rectangular buckle to the combined hat.

4. Glue the combined pilgrim head to the box base. Glue the combined hat to the pilgrim combined box base. I used a small piece of foam square adhesive to attach the brim of the hat and added enamel dots to the pilgrim’s eyes. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

5. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

6. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

7. Glue the hands to the coordinating shapes on the box base hands. Glue the cuff pieces into place. The hands tuck into the slots of the center strip.  Glue the combined belt piece on the front of the box:)

Pilgrim Girl Hug Treat Box

Pilgrim Girl Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .75”

(W 3.75” X H 5” including character)

This treat box features character arms that open to a small treat box. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full pilgrim head with eye cut outs to the slightly larger one with a scalloped bottom. Glue the pilgrim face with large eye openings to the pilgrim face base that has smaller eye openings.  Glue the two hand pieces to the cuff base pieces with scalloped edges.

3. Glue the combined pilgrim face pieces to the combined pilgrim head piece. Glue the pilgrim hair to the combined combined head piece. Fold the score lines on the box base.

4. Glue the combined pilgrim head to the box base. Glue the larger half oval shaped hat piece to the combined pilgrim on the box base. 

5. I used a small piece of foam square adhesive to attach the brim of the hat and added enamel dots to the pilgrim’s eyes.

6. Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

7. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

8. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

9. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip. Glue the apron piece on the front of the box:)

Pumpkin Pie Grouping

Pumpkin Pie Grouping- JMRush 

These designs can be used for scrapbook pages, gift bags, or for fall themed crafting projects. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

https://www.jamieandjenn.com/thanksgiving/

1. Cut design pieces.

2. Match up the two largest scalloped circle pieces. (The shapes are irregular so you may need to turn them to get the scallops to match up). Center the smaller scalloped circle and glue it on top the larger one. Center and glue the smaller lettering to the larger lettering.

3. Match up the whip topping pieces with cut outs (3) to their solid base pieces. Center and glue. I did not glue the center of the largest round whip topping so that it cold be pulled up to show dimension. Glue the smaller solid circle to the the center of the larger full circle piece. Glue the slice of pie cut out piece to the solid slice of pie piece. Glue the scalloped open  oval piece to the coordinating larger scalloped open oval piece.

4. Center and glue the third smallest scalloped circle to the combined scalloped circle. Use foam adhesive squares to attach the combined whip cream pieces to the combined slice of pie, combined circle pieces, and to the oval side view pie piece. Glue the smaller spatula to the larger one.

5. Use foam adhesive pieces to attach the combined pumpkin pie full circle

to the combined scalloped circle piece and pieces of adhesive squares to attach the combined oval scalloped piece to the larger oval piece. Glue the handle and the triangle to the spatula. Glue the narrow triangle piece to the top of the slice of pie combined piece. Tuck the side view pecan cut out piece into the combined side view pie pan. Apply pieces of foam adhesive squares to it’s back and glue to the perimeter of the pan on the backside. Center and glue to the solid side view base:)

Pecan Pie Grouping

Pecan Pie Grouping- JMRush 

These designs can be used for scrapbook pages, gift bags, or for fall themed crafting projects. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

You can purchase the SVG and Cricut file here:

https://www.jamieandjenn.com/thanksgiving/

1. Cut all design pieces. ( There is an additional black side view pie piece missing from the beginning of this tutorial. It appears in image 5.)
2.  Match up the two largest scalloped circle pieces. (The shapes are irregular so you may need to turn them to get the scallops to match up). Center the smaller scalloped circle and glue it on top the larger one. Center and glue the smaller lettering to the larger lettering. Glue the smaller spatula to the larger one. 

3. Center and glue the third smallest scalloped circle to the combined scalloped circle. Use foam adhesive squares to attach the pecan cut out pie (full circle) to it’s coordinating solid base. Glue the scalloped oval piece to the coordinating larger scalloped oval piece. Glue the slice of pie piece to it’s solid base coordinating piece. Glue the pecans to their coordinating solid base piece.

4. Use foam adhesive pieces to attach the combined pecan pie full circle

to the combined scalloped circle piece and pieces of adhesive squares to attach the combined oval scalloped piece to the larger oval piece. Glue the handle and the triangle to the spatula. Glue the narrow triangle piece to the top of the slice of pie combined piece. Glue the combined pecan piece to the top of the combined slice of pie piece. Glue the whip topping to it’s coordinating solid base shape and attach it to the slice of pie combined piece with a piece of adhesive foam square.

5. Tuck the side view pecan cut out piece into the combined side view pie pan. Apply pieces of foam adhesive squares to it’s back and glue to the perimeter of the pan on the backside. Center and glue to the solid side view base.

6. Like so:)

Leaf 3D 4x6 Photo Frame

Leaf 3D 4x6 Photo Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

Fits 4X6 photos.

This easy to construct, two piece frame can be used vertically or horizontally and features a fold out stand and a decorative leaves. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut out design piece. ( I used double sided card stock)

2. Insert the tabs of the frame base into the frame base slots.

3. Image of step 2 completed.

4.-5. Align and center the pieces. On the backside. Apply glue to the inside of the tabs and secure into place.

6. Pre-fold all scored lines on the edges of the frame folding them inward toward the center. Fold all score lines on the flower pieces. For each set of the flowers- fold one in and one out.

7. Starting on the right side of the frame base, apply hot glue to the very edge. 

8.  Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.

9. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.

10.-15. Repeat this steps for each of the frame sides. Be careful to only apply glue to the edge of each side so that the stand leg on the base of the frame will have mobility later and so inserting your photo is easy:)

16.-18. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure. Repeat for each tab.

19. Match up the leaves and glue the smaller leaves to the larger ones.

20. Curve your combined leaves as you like.

21. Insert your photo by sliding it into place. The sides of the frame will lift up a bit to ease the photo insertion.

22.-23. Glue the largest combined leaves in the corners of the frame. Note: This frame can be used horizontal ( as shown) or vertical. Use foam adhesive squares to attach the middle sized leaves. I used a dab of glue on the stem to secure the bottom of the middle sized leaves. Glue the smallest combined leaves to the frame:)

Give Thanks Script

Give Thanks Script- JMRush 

The Give Thanks Script can be as a single script or stacked to create dimension. This word art can be used for scrapbook pages, gift bags, or for fall themed crafting projects. 

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Pumpkin Contour Card

Pumpkin Contour Card-JMRush

Approximate size: W 5.5 “x H 4.25”

The Pumpkin Contour Card features a beveled Pumpkin design that reads “Thankful” on the front cover and contains a hidden gift card/message/picture holder section on the inside. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

 1.Cut design pieces. (I used double sided card stock) 

2. Fold the card base along the score lines. Apply glue to the backsides of the rounded pumpkin shape and secure to the pumpkin shape with the leaf attached.

3. Apply glue to the backsides of the two side tabs on the card base and secure to the upper panel. Glue the “Thankful” word to the combined pumpkin piece.

4. Curve the leaf as preferred and glue the center of the backside of the stem to the combined pumpkin.

5.-6. Curve the combined pumpkin. Fold the top of the card down and insert the tabs of the combined pumpkin into to the slots on the card base front.

7. Make sure the design on the front is centered as you like and then glue the tabs of the combined pumpkin on the inside of the card.

8. Apply glue to the inside of the top flap of the card base and secure the rectangular shaped piece. Align at the top and center ( top side will show through the front of the card). There is a small sliver of the shape that will show at the bottom of the front of the card base.

9. Insert gift card or pictures. 

10. I finished with a ribbon and an enamel dot:)

Pumpkin Treat Box

Pumpkin Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has four optional Jack-O-Lantern faces that can be used, has an attached lid, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score line. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
3. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
4. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
5. Tuck the tab into the slot in the back.
6. Glue the two stem leaf pieces together on the central stem part only and making sure that the half circle shapes at the bottom and leaves are still separate.
7. Curl the leaves as you like.
8. Glue the two small stem designs to each side of the combined stem/leaf piece.
9. Insert the combined stem/leaf piece into the slot on the top of the treat box.
10. Apply glue to the inside of the leaf/stem small tabs and secure to the top of the lantern. Hold until secure.
11. Apply glue to the backside of the small circle piece.
12. Cover the tabs on the inside of the lid portion of the treat box. Finish by adding a ribbon or twine and apply one of the four Jack-O-Lantern faces if desired.

Pumpkin Lantern (Flameless)

Pumpkin Lantern (Flameless)-JMRush

Approximate size: W 4.50” X D 4.50” X H 7”

When vellum paper is used, an opaque lantern effect is created on this five sided lantern. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock)

2. Flip lantern pieces over ( pretty side down). Fold score line up. Align the lantern pieces so that the upper tabs are on the upper right side. Apply glue to the backside of the long side tabs and secure the three lantern pieces together.

3. Apply glue to the very edges of the rectangular vellum pieces. Align over each open window of the lantern panels. Secure.

4. Glue the two stem leaf pieces together on the central stem part only and making sure that the half circle shapes at the bottom and leaves are still separate.

5. Glue the two small stem designs to each side of the combined stem/leaf piece. Curl the leaves as you like.

6. Apply glue to the top right side tab of the third panel top and attach to the inside of the next triangular top to the right. Repeat for the next tab.

7. Repeat for the next tab on the fourth panel.

8. Repeat for the tab on the first panel.

9. Repeat for the last two tabs which encloses the top of your lantern.

10. This is what it should look like.

11. Apply glue to the long side tab on the last panel and attach to the panel to the left, creating a enclosed pentagon box shape.

12. Apply glue to the inside of the leaf/stem small tabs and secure to the top of the lantern. Hold until secure.

13. Fold the score lines on the lantern base.

14. Apply glue to the small tabs on the lantern base and secure to the inside of the rectangular shape to the left. 

15. Repeat for all tabs.

16. This is what it should look like.

17. Place a flameless candle in the center of the lantern base. (I used a 3” W x 4” H flameless color changing candle) The lantern top is placed over the top. I finished with a ribbon.

Thankful Box

Thankful Box-JMRush

 W 5" X  H 4” X D 1.25” 

This Thankful Box can be filled with your favorite goodies to give as a gift or it can be used as a center piece for your Thanksgiving dinner table. This file contains a optional 5”x 3” print and cut index card design in which your guests can write down what they are thankful for to be read aloud during Thanksgiving dinner. The lettering can also be used separately for your other projects. This design is compatible with 8x12 or 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Pre-Fold all score lines.

3.Apply glue to the tabs on the second section.

4. Secure to the third section from the top.

5. Apply glue to the tabs of the third section.

6. Secure to the first section, creating a box.

7. Apply glue to the wings of section four.

8. Secure to the inside of the wings of section five.

9. Your box should look like this.

10. This image shows how the closure tab tucks into the base of the box.

11.Glue the lettering onto the lettering base.

12.Center the lettering on the box and glue into place. ( i used foam adhesive squares to give it a pop)

13.-15 You can use the scalloped edge piece and attach a ribbon if you like:)

Blessed Box

Blessed Box-JMRush

W 5" X  H 4” X D 1.25” (Not including handle)

This Blessed Box can be filled with your favorite goodies to give as a gift or it can be used as a center piece for your Thanksgiving dinner table. This file contains a optional 5”x 3” print and cut index card design in which your guests can write down their blessings to be read aloud as you are giving thanks. The lettering can also be used separately for your other projects. This design is compatible with 8x12 or 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Pre-Fold all score lines.

3.Apply glue to the tabs on the second section.

4. Secure to the third section from the top.

5. Apply glue to the tabs of the third section.

6. Secure to the first section, creating a box.

7. Apply glue to the wings of section four.

8. Secure to the inside of the wings of section five.

9. Your box should look like this.

10.Glue the letters onto the letter base.

11. Insert the handle into the slots on either side of the box.

12. Center and glue the lettering onto the box.( I used foam adhesive squares to give the words a bit of a pop)

13.You can use the scalloped edge piece to decorate and add a bow to the handle if you like:)

Turkey Wobble Wings

Turkey Wobble Wings Box-JMRush

Finished Box Dimensions including handle (approximate): 

W 3” x H 4.5” x D 2.5”

This cute little turkey has arms that “wobble” when moved. Fill this cute little turkey box with your favorite goodies to give as a gift. This design is compatible with 8x12 or 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

Autumn Leaves with Detail

Autumn Leaves with detail- JMRush 

These fall leaves can be used with the nested detailing pieces or as solid leaves. Use them to decorate, for scrapbook pages, gift bags, or for fall themed crafting projects. 

Pilgrim Girl Cone Container

Pilgrim Girl Cone Container-JMRush

Basket size: W 4" X  H 2.25”

Pilgrim Girl Size (approximate): W 6” X H 6.25”

This Pilgrim Girl Cone Treat container can be filled with goodies for a gift or used as a center piece for your Thanksgiving feast. 20” of 1/4” ( or smaller width) ribbon or twine is needed to complete the basket. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-fold all score lines.
3. Using 20” of 1/4” or smaller ribbon or twine, lace it through the holes of the Octagonal design piece to create a basket. Tie a bow to secure.
4. Starting with the largest curved body piece, insert the tab into the slot.
5. Apply glue to the inside of the cone on the inside of the tab.
6. Secure into place. Repeat for each Curved cone body section.
7. Repeat for each Curved body section.
8. Apply glue to the inside of the second largest curved body piece.
9. Place it on top of the largest curved cone body section and secure. Make sure that the seams align in the back.
10. Apply glue to the back side of the hands and secure them onto the arm pieces.
11. Apply glue to the backside of the rectangular cuff pieces and secure them on top of the wrists of the arm pieces.
12. Apply glue to the backsides of the top of the arms. 
13. Secure the arms onto the the joined cone body sections.
14. Apply glue to the inside of the collar cone body section.
15. Secure the collared section on top of the joined cone body sections, making sure the the seams in the back align.
16. Apply glue to the inside of the face section.
17. Glue to on top of the belt buckle sections, aligning the seams in the back.
18. Pre-curve the triangular hair piece, making sure that the edges with align.
19. Apply glue to the top of the scored edge.
20. Secure the edges together.
21. Apply glue to the inside of the hair section and glue on top of the coned body sections. Glue the white eye section to the solid eye section.
22. Glue the eyes and the nose into place.
23. Slide the smaller open circle onto the hat base. 
24. Apply glue to the top of the bottom tabs of the hat base.
25. Secure the tabs on the bottom of the open circle.
26. Apply glue to the top of the open circle.
27. Secure the larger open circle on top of the smaller open circle.
28. Apply glue to the top of the tabs on the hat section.
29. Secure the solid circle on top.
30. Apply glue to the top base of the feet and secure to the bottom of the basket piece.
31. Apply glue to the top of the hair cone section(I used a hot glue gun for this step) and glue the hat into place.
32. Fill your pilgrim with goodies to give as a gift or use him as a festive Holiday decoration:)