Graveyard Fence Basket

 Graveyard Fence Basket-JMRush 

Approximate size: W 3.75 x D 3.25 x H 5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock) Your file will contain only one set of ghosts.

2. Fold all score lines. Using foam adhesive squares, attach the “rip” tombstones to their coordinating solid shapes; centering them. Using foam adhesive squares, attach the ghost with cut outs to it’s coordinating solid shape; centering it.

3. Apply glue to the outside of the fence posts that have score lines. Attach to the inside coordinating fence post on the sides; aligning at the edges. 

4. Repeat until all four corners are glued and you have a box shape.

5. Insert the handle to the slot on the sides of the basket base.

6. Use foam adhesive squares to attach the combined tombstones to the coordinating shapes on the basket base; centering each one. Use foam adhesive squares to attach the combined ghost to the inside of the front tombstone.

7. I finished with ribbon for the handle and for a bow tie:)

Frankenstein Open Mouth Treat Box

Frankenstein Open Mouth Treat Box-JMRush

Approximate Size: W 3.75” x D 1.25”x H 4.25”

Approximate Box size: W 2.5” x D 1 x H 4” 

This box opens by lifting the character’s head to to expose the opening to the treat box. This simple to construct design would be perfect to hold your goodies for Halloween parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the green Frankenstein head with eye cut outs to it’s coordinating solid base on the flip piece (long shape with a cut out oval and screws on either side);aligning with at the edges and at the eye holes. Fold the score lines on the box base.

3.-4 Apply glue to the two small vertical side tabs at the bottom of the box base. Secure the two small vertical side tabs to the 1 inch (width) rectangles just above them. 

5. Apply glue to the very left corner of the horizontal tab just below the two side tabs that you just glued. ( My finger is pointing to the section in the photo:) Secure this corner to the vertical tab to the left.

6. Apply glue to the topside of the vertical and horizontal panel. Secure the final panel creating a complete box.
7.-8. Flip the long flip piece over ( so the backside is showing). Apply glue to the entire piece and attach the white piece with an oval cut out to it’s matching shape and the white piece with teeth to it’s coordinating shape. 

9. Apply glue to the backside of the green rectangle with teeth cut outs and attach to the coordinating shape on the combined flip piece. Glue the silver screws to each side at the coordinating shapes on the combined flip piece.

10. Secure the tab on the box base by tucking the tab on the inside of the box and feeding it through the slot. (Apply glue to the underside of the tab and secure to the box if you wish)

11.-12. Flip the box base over and glue the combined flip piece; aligning the oval cut outs in the middle.

13.-14. Close the combined flip piece. Glue the scar and long rectangle eyebrow piece into place. Use small pieces of foam adhesive square to attach the small long oval screw head pieces to each side. Fill with candy:)

Skull Tea Light Banner (Flameless)

Skull Tea Light Banner (Flameless)-JMRush

Approximate size of each box: W 1. 5/8” X  H 1. 5/8” X D 1. 5/8”

This cute little skull box is the perfect size to hold one battery operated flameless tea light candle. This file and can be used independently or can be duplicated and strung together to create a banner for Halloween parties. This design is compatible with 8x12 or 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the cube base over ( pretty side down). Apply glue to the inside edges of the open square. Secure the small vellum square over the open square; centering it.

3. Insert a ribbon for hanging your cube.

4. Fold the score lines of the cube. Use pieces of foam adhesive squares to attach the skull to the skull base.

5. Apply glue to the top two tabs and secure to the square panel just above the tabs that has the hanging ribbon in it.

6. Apply glue to the next two tabs on the cube base and secure the lower panel to them.

7. Insert a Flameless battery operated tea light. (I used a color changing tea light)

8. Close the lid - Glue the combined skull piece to square that has the vellum piece. Do NOT glue the lid. The lid must open to turn the tea lights on and off:)
9. Tie the ribbon. The skull boxes can be duplicated and strung together to make a banner.

Mummy Treat Box

Mummy Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has an attached lid and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score line. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
3. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
4. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
5. Tuck the tab into the slot in the back. Attach the mummy face wrap to the mummy skull using pieces of foam adhesive squares.
6. Attach the combined mummy skull to the skull solid base using foam adhesive squares.
7. Attach the eyes to the coordinating shapes on the combined skull using pieces of foam adhesive squares.
8. Attach the combined mummy skull to the front of the treat box using foam adhesive squares and finish with a ribbon bow tie.

Ghost Treat Box- Girl and Boy

Ghost Treat Box- Girl and Boy-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has an attached lid and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score line. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
3. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
4. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
5. Tuck the tab into the slot in the back.
6. Glue each of the ghost’s arms to the edge of the back side ( with the tab/slot at the top)
7. For the boy ghost, Glue the small circle eyes to the larger white circles; centering them. Glue the mouth into place and use pieces of foam adhesive squares to attach the eyes to the front of the treat box. I used enamel dots to accentuate the eyes and finished with a ribbon bow tie. Fill with goodies:) — For the girl, glue the mouth and eyes to the front of the treat box and finish with a ribbon at the top corner.

Witch Treat Box

Witch Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has an attached lid and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score lines.
3. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
4. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
5. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
6. Tuck the tab into the slot in the back.
7. Glue the witch’s collar, face, and hat to the front of the box.
8. Glue the witch’s eyes inside the coordinating shape on the box base.
9. Use a piece of foam adhesive to secure the nose into place. I used enamel dots to accentuate the eyes and finished with a ribbon to decorate the hat. Fill with goodies:)

Vampire Treat Box

Vampire Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has an attached lid and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score lines.
3. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
4. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
5. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
6. Flip your box over so that the slot is in the back. Attach the bow tie with a piece of foam adhesive square.
7. Glue the vampire’s face to the front of the box.
8. Glue the vampire’s eyes and teeth inside the coordinating shape on the box base.
9. Tuck the tab into the slot in the back. 
10. Glue the wings on either side of the backside of the box.
11. This is what it should look like.
12. I used enamel dots to accentuate the eyes and finished with a ribbon bow tie. Fill with goodies:)

Pumpkin Envelope Pouch

Pumpkin Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Pumpkin pouch with your favorite candy bar or use it as a cutlery holder for your Halloween/Thanksgiving party. Use this Pumpkin plain or choose from the four mix and match Jack-O-Latern faces included in this file. The pouch’s super easy construction makes it perfect for Halloween  or Thanksgiving parties. This design is compatible with 8x12 or 12X12 mats.

Skeleton Box

Skeleton Box-JMRush

Finished Box Dimensions (approximate): 

W 3” x H 2.5” x D 2.5”

You can fill this cute skeleton box with your favorite goodies. This design is compatible with 8x12 or 12X12 mats.

Bat Wobble Arms Box

Bat Wobble Arms Box-JMRush

Finished Box Dimensions including handle (approximate): 

W 3” x H 4.5” x D 2.5”

This cute little Bat has arms that “wobble” when moved. You can fill this Bat box with your favorite goodies. This design is compatible with 8x12 or 12X12 mats.

Ghost Wobble Arms Box

Ghost Wobble Arms Box-JMRush

Finished Box Dimensions including handle (approximate): 

W 3” x H 4.5” x D 2.5”

This cute little ghost has arms that “wobble” when moved. Fill this cute little ghost box with your favorite goodies and it is perfect for classroom parties or for sending a “Boo” to the neighbors. This design is compatible with 8x12 or 12X12 mats.

Skull Crossbones Envelope Pouch

Skull Crossbones Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Skull Crossbones pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween/Pirate party. The pouch’s super easy construction makes it perfect for parties. This design is compatible with 8x12 or 12X12 mats.

Candy Corn Envelope Pouch

Candy Corn Envelope Pouch-JMRush

Finished Pouch Dimensions : 

W 3” x H 5.25”

Fill this cute little Candy Corn pouch with your favorite candy bar or use it as a cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

Vampire Envelope Pouch

Vampire Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Vampire pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Glue the bow tie piece into place. 
6. Glue the face piece in place.
7. Glue the eyes and fangs into place.
8. Apply glue to the front inside edge of each wing (scalloped edge up).
9. Secure each wing to the back side of the pouch.
10. TA DA! Your vampire is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.

Witch Envelope Pouch

Witch Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little witch pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween

parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Glue the eyes,face, collar, and hat pieces into place. (eyes go behind the face)
6. Using foam adhesive squares secure the nose piece into place.
7. Add a ribbon and TA DA! Your witch is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.

Frankenstein Bride Envelope Pouch

Frankenstein Bride Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Frankenstein Bride pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Glue the face piece to the bottom front of the pouch. 
6. Glue the eyes and hair highlights into place.
7. Using pieces of small foam adhesive, glue the bolts to either side of the pouch.
8. TA DA! Your Frankenstein Bride is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.

Frankenstein Envelope Pouch

Frankenstein Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Frankenstein pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Glue the eye piece to the solid eye piece. 
6. Glue the bolt pieces to each side of the pouch.
7. Glue the eye pieces and suture into place.
8. Using pieces of small foam adhesive, glue the bolts to    either side of the pouch.
9. TA DA! Your Frankenstein is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.

Bat Envelope Pouch

Bat Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Bat pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Glue the eye piece to the solid eye piece. 
6. Apply glue to the front inside edge of each wing (scalloped edge down).
7. Secure each wing to the back side of the pouch.
8. Apply glue to the bottom backside edge of the bat ears and secure onto the top of the front layer of the pouch.
9. Using foam adhesive squares secure the eye pieces onto the front of the pouch.
10. Glue the Bat’s smile into place and TA DA! Your bat is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.

Werewolf Envelope Pouch

Werewolf Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little werewolf pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Apply glue to the front inside edge of each arm pieces(scalloped edge down) and to the bottom backside of each ear.
6. Secure each arm piece to the back side of the pouch and ears to the top front side of the pouch.
7. Glue the eye piece to the solid eye piece.
8. Glue the eye piece to the backside of the face design and glue into place on the pouch. Glue the small triangle teeth into place.
9. Using a piece of a small foam adhesive, secure the nose piece on top of the face design and TA DA! Your werewolf is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.

Boo Ghost Envelope Pouch

Boo Ghost Envelope Pouch-JMRush

Finished Pouch Dimensions (not including Ghost Appliqué dimensions): 

W 3” x H 5.25”

Fill this cute little ghost pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.