Vampire Treat Egg Holder

Vampire Treat Egg Holder -JMR

Approximate size: H 5” X W 4.5” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the vampire face to the coordinating shape on the box base. Glue two of the four curve hands to the front of the full vampire shape as shown.
3. Glue the eyes and collar into place on the box base.
4. Use pieces of foam adhesive squares to attach the red bow tie and the tiny little oval nose. I used adhesive jewels to accentuate the eyes.
5. Flip the box base over. Fold the score lines inward. Flip the full silhouette over and glue the ear/neck section and two remaining hands in place.
6. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry. Use pieces of foam adhesive squares to attach the cape collar on the vampire silhouette piece.

7. Apply glue to the small horizontal tab. Tuck under the vampire figure enclosing the box.

8. Apply glue to the backside of the vampire box base and attach the solid full body shape aligning at the edges.

9. This is what it should look like:)

10. Flip the box over to the front and attach the oval red shoes with foam adhesive squares.

Vampire Gift Tag Ornament

Vampire Gift Tag Ornament-JMRush

Approximate Size: W 3.25” x H 4.5”

This simple to construct design would be perfect to label your goodies for Halloween parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the hair piece to the coordinating shape on the round head piece with eye mouth cut outs. Glue the hands to the coordinating shapes on the tag base. Glue the white collar sleeve piece in place on the combined tag base. Glue the tiny oval to the nose base; aligning at the top.

3. Glue the combined nose to the head piece. Glue the bow tie and buttons to the tag base.

4. Place the combined head over the tag base aligning at the top and sides of the coordinating shape. Using a pencil, mark where the eyes should be places.

5. Remove combined head and place enamel jewels on the pencil marks. (I added a ribbon over the bow tie and adhesive jewels over the buttons.)

6. Attach the combined head with adhesive foam squares.

7. This is what it should look like:)

8. Flip the design over and glue the white body shape into place so that you have a place to write (optional).

 

Vampire Handle Basket

 Vampire Handle Basket- JMRush 

Approximate Box size: H 2.25” X W 3” X D 2.25”

Approximate Design size: W 6” X H 5.5” including handle

This cute Vampire basket design is a perfect container for Halloween party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

               

1. Cut design pieces. ( I used double sided card stock) ( The red Bow tie piece is not shown in the beginning of this picture tutorial…sorry)
2. Glue the face piece with cut outs to the solid face piece; aligning at the bottom. Using foam adhesive squares, attach the heels of the shoes to the coordinating shapes of the shoe bases.
3. Glue the whites of the eyes and the fangs into place on the combined face.
4. Glue the white curved cuffs to the top of the hands; aligning on the top edges.
5. Using foam adhesive squares, attach the combined face and combined hands to the basket base. ( The head aligns with the top of the basket base). Glue the red bow tie under the head and in-between the hands; centering it.
6. Flip the combined basket over. Fold the basket base at the score lines. Apply glue to the bottom two tabs on the basket base and secure to the Vampire shape below.
7. Apply glue to the top two tabs on the basket base and secure to the rounded shape above creating a box.
8. Using foam adhesive squares, attach the combined shoes to the rounded side of the basket.
9. Insert the handle on either side of the basket.
10. Finish by adding a ribbon for the bow tie and adding adhesive enamel dots to accentuate the eyes:)

Bat 3D Stand Up

Bat 3D Stand Up- JMRush 

Approximate size: W 6.5” X H 5.25”

This cute bat decoration stands independently. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock) 

2. Fold each of the 6 tummy shapes at the score lines. Glue bat piece with a face to the solid bat silhouette base.

3. -5. Glue the eyes and mouth into place. Apply glue to the backside of one side of the folded tummy shapes. Line up the back of another tummy shape and align at the edges. Continue this step until all the tummy shapes have been joined.

6. Apply glue to the backside of the combined tummy shapes. Attach to the combined bat; aligning at the bottom edge:)

7. Finish with a ribbon and adhesive enamel dots to accentuate the eyes:)

Vampire Boy Hug Treat Box

Vampire Boy Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .5” 

(W 5.5 X H 4.75” including character)

This treat box features character arms that open to a small treat box. This design is perfect for Halloween parties or for your special trick or treaters. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base) ( I changed the color of the hair piece in the final image).

2. Glue the full vampire head with cut outs to the slightly larger one with fangs.Glue the vampire face with large eye openings to the vampire face base that has smaller eye openings.  Glue the cuff pieces with circle cut outs to the slightly larger cuff base pieces; aligning on the smallest edge.

3. Glue the vampire hair into place on the combined vampire head piece. Glue the combined vampire face to the combined vampire head base. I used a small piece of foam square adhesive to attach the spider and added enamel dots to the vampire’s eyes and spider body to accentuate those shapes. Glue the collar into place on the box base; aligning the notches with the coordinating shapes on the base. 

4. Using foam adhesive squares, attach the combined vampire head to the coordinating shape on the box base. Glue the bow tie piece just underneath the combined head on the box base. Fold the box base along score lines.

5.  Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

6. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

7. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

8. Glue the hands to the coordinating shapes on the box base hands; aligning with the edge of the box. Glue the cuff pieces into place. The hands tuck into the slots of the center strip:) Finish with a ribbon for a bow tie:)

Vampire Girl Hug Treat Box

Vampire Girl Hug Treat Box-JMRush

Approximate box size: W 3.” x D 2.25 x H .5” 

(W 4.5 X H 4” including character)

This treat box features character arms that open to a small treat box. This design is perfect for Halloween parties or for your special trick or treaters. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the full vampire head with cut outs to the slightly larger one with fangs.Glue the vampire face with large eye openings to the vampire face base that has smaller eye openings.  Glue the hand pieces to the larger cuff/web base pieces.

3. Glue the vampire hair into place on the combined vampire head piece. Glue the combined vampire face to the combined vampire head base.

4. Glue the collar into place on the box base. I used a small piece of foam square adhesive to attach the spiders and added enamel dots to the vampire’s eyes and spider’s bodies to accentuate those shapes.

5. Using foam adhesive squares, attach the combined vampire head to the coordinating shape on the box base. Fold the box base along score lines.

6.  Apply glue to the two top tabs of the box base and secure them to the top (head) panel.

7. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

8. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

9. Glue the hands to the coordinating shapes on the box base hands. The hands tuck into the slots of the center strip:)

Bat Hug Treat Box

Bat Hug Treat Box-JMRush

Approximate box size: W 3.25” x D 2.25 x H .75” 

(W 8.5 X H 4.25” including character)

This treat box features character arms that open to a small treat box. This design is perfect for Halloween parties or for your special trick or treaters. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Glue the Bat head to the coordinating shape on the box base.

3. I used enamel dots to accentuate the eyes and then used foam adhesive squares to attach the eye shape to the box base; centering and aligning with the coordinating shape. Glue the mouth the to the coordinating shape on the box base.

4. Fold the box base along score lines.

5. Apply glue to the two top tabs and secure them to the top (head) panel.

6. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

7. Apply glue to the bottom tab of the center narrow strip section. Secure the center narrow strip tab to the backside of the inside of the box.

8. Glue the hands to the coordinating shapes on the box base hands; aligning with the edge of the box. The hands tuck into the slots of the center strip:)

9. Apply a small line of glue on the top inside edge of the wings and attach to the backside of the box; aligning with the bottom and the edge of the box base:)

Dracula Hug Treat Box

Dracula Hug Treat Box-JMRush

Approximate box size: W 3.25” x D 2.25 x H .75” 

(W 5.25 X H 4.75” including character)

This treat box features character arms that open to a small treat box. This design is perfect for Halloween parties or for your special trick or treaters. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided card stock for the box base).

2. Fold the box base along score lines. Glue the Face to the Head shaped piece.

3. Apply glue to the two top tabs and secure them to the top (head) panel. Glue the eyes and teeth into place on the combined head piece.

4.  Apply glue to the bottom tab of the center narrow strip section.

5. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box. Secure the center narrow strip tab to the backside of the inside of the box.

6. Using foam adhesive squares, attach the combined head piece to the larger head/collar piece and secure the bow tie into place. Glue the hands and sleeve pieces to the coordinating shapes on the box base.

7. I used enamel dots to accentuate the eyes and added a shiny ribbon. The hands tuck into the slots on the narrow strip in the center.

8. Using foam adhesive squares, attach the combined head to the box base:)

Bat Treat Box

Bat Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has an attached lid and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score lines. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
3. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
4. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
5. Tuck the tab into the slot in the back. Glue the eyes to the solid eye base.
6. Glue each of the Bat’s wings to the edge of the back side ( with the tab/slot at the top)
7. Glue the bat’s ears to the backside corners of the box.
8. Attach the combined eyes to the front of the treat box with pieces of foam adhesive squares. Glue the mouth into place.
9. I used enamel dots to accentuate the eyes. Fill with goodies:)

Dracula Pocket Card

Dracula Pocket Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Glue the solid large head panel and the top panel into place. Glue the face to the solid face base.
3. Flip the card base over. Fold the score lines on the card base. Apply glue to the back of the side tabs. Secure to the upper rectangular panel forming a pocket. Glue the eyes and teeth to the combined face base.
4. Insert note or gift card.
5. Using pieces of foam adhesive squares, attach the combined face base and bow tie. I used different sized small enamel dots to accentuate the eyes and finished with a ribbon bow tie:)

Vampire Treat Box

Vampire Treat Box-JMRush

Approximate Box size: W 2.75” X W 1” X H 4.25”

This treat box design has an attached lid and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2. Flip the box base over like shown (pretty side down). Fold the box base score lines.
3. Apply glue to the backside of the tab on the bottom right. Attach to the upper panel to the right.
4. Apply glue to the backside of the tab on the bottom left. Attach to the panel to the left.
5. Apply glue to the long vertical tab on the left and to the bottom horizontal tab. Attach to the panel to the right. Your box will be complete.
6. Flip your box over so that the slot is in the back. Attach the bow tie with a piece of foam adhesive square.
7. Glue the vampire’s face to the front of the box.
8. Glue the vampire’s eyes and teeth inside the coordinating shape on the box base.
9. Tuck the tab into the slot in the back. 
10. Glue the wings on either side of the backside of the box.
11. This is what it should look like.
12. I used enamel dots to accentuate the eyes and finished with a ribbon bow tie. Fill with goodies:)

Vampire Envelope Pouch

Vampire Envelope Pouch-JMRush

Finished Pouch Dimensions: 

W 3” x H 5.25”

Fill this cute little Vampire pouch with your favorite candy bar or use it as a  cutlery holder for your Halloween party. The pouch’s super easy construction makes it perfect for classroom or Halloween parties. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs of the pouch base on each side.
4. Secure the tabs to the lower flap of the pouch. 
5. Glue the bow tie piece into place. 
6. Glue the face piece in place.
7. Glue the eyes and fangs into place.
8. Apply glue to the front inside edge of each wing (scalloped edge up).
9. Secure each wing to the back side of the pouch.
10. TA DA! Your vampire is ready to be filled with goodies or used as a cutlery holder for your Halloween parties.