Deer Track Ornament Gift Tag

Deer (Reindeer) Track Ornament Gift Tag- JMRush 

Approximate Tag size: H 4” X W 2.5”

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Use foam adhesive squares to attach the animal track piece to the ornament base (lager piece with circular hanger); centering it.
3. Glue the smaller piece with a circular hanger to the backside of the combined piece; centering it. (This piece is optional and is meant for a writing space if design is used for a gift tag) Finish with a ribbon and a enamel dot:)

Compass Gift Tag Ornament

Compass Gift Tag Ornament- JMRush 

Approximate Tag size: H 4” X W 3.25”

This design has a moveable direction needle when a brad is used, can be used as a gift tag or ornament, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. You will need a brad for this project.
2. Center and glue the two compass cut out pieces together. Glue the two open circle pieces together ( smaller on top). Glue the two small circles together ( smaller on top). Glue the single needle to the double needle piece.
3. Glue the small circular hanger piece to the combined compass cut out piece. Insert the brad through the hole on the combined needle piece. Flip the ornament base ( solid with a circular hanger) over and glue the solid circle shape to it; centering it. Flip back over ( pretty side up)
4. Insert the bottom of the brad through the center hole of the combined compass cut out piece and fold tabs. Apply glue around the edges of the backside of the combined compass cut out piece and glue to the top side of the ornament base; centering it. 
5. Use pieces of foam adhesive squares to attach the combined open circles and the small combined circles to the front of the combined compass. Finish with a ribbon:)

Winter Trees Ornament Gift Tag

Winter Trees Ornament Gift Tag- JMRush 

Approximate Card size: H 6.50” X W 4.”

This design is compatible with both 8X12 and 12X12 mats and can be used as a gift tag or ornament. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used a reflective blue paper for the tree silhouette background)
2. Glue the fullest tree silhouette to the solid rectangle. Flip the ornament base ( with a circular hanger) over and glue the solid coordinating shape to it; centering it. Curve the pine needles as you like.
3. Flip the ornament base back over and glue the coordinating shape that has a open rectangle to the front; centering it. Glue the next fullest tree silhouette to the combined tree silhouette panels.
4. Glue the smallest tree silhouette to the combined tree silhouette panels.
5. Use foam adhesive squares to attached the combined tree silhouette panels to the ornament base.
6. Glue two of the pine needles together at the top. Repeat for the other set.
7. Glue the pine needle sets to the combined tree silhouette panel at the top corners. 
8. Finish with a ribbon and a enamel dot:)

Winter Woodland Lantern (Flameless)

Winter Woodland Lantern (Flameless)-JMRush

Lantern size: W 3 x D 3 x H 7”

This Flameless Snowflake Lantern features cut outs and when vellum paper is used, a layered frosted glass effect is created. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. ( The trees are easier to remove from the mat if you work them off starting at the bottom.)

2. Glue the coordinating panels together-(Larger one goes on the back)

3. Apply glue to the edges of the backside of the combined panels.

4.Attach the vellum rectangles to the backside of the panels.

5.Flip the lantern base over (pretty side down) Glue the panels on the lantern base. 

6. You will need to flip the lantern over to check to make sure each panel is aligned and centered.

7.Fold all score lines.

8. Apply glue to the bottom of the long side tab on the very right side of the first lantern base section. Align the other lantern base section and secure the long side tab.

9. Apply glue to the bottom of the long side tab on the very right side of the combined lantern base section. Secure it to the inside of the other side creating a box.

10. Glue the circular hangers together. ( Make sure the stems of this piece remain separate) 

11. Apply glue to the outside of one of the stems.

12. Glue one of the stems to the inside of the top of the window panel that you want to be the front of your lantern.

13.Apply glue to the top tab next to the circular hanger you just placed. Begin to secure the top tabs to the inside of the next angled triangle.

14. Apply glue to the remaining circular hanger stem.  Continue to secure the top tabs. Attach the other Circular hanger stem to the inside of the opposite side of the lantern.

15.  Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides.

16. Repeat for the bottom tabs creating a shallow box.

17. Finish with a ribbon and place a flameless candle inside by lifting the lantern top off of the lantern base. I used a color changing flameless candle to create the color in the image above:)

Brown Bear Sweater Hug Gift Card Holder

Brown Bear Sweater Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7” 

This card features character arms that open to release a hidden gift card section. The Bear’s sweater has a Christmas Tree detail on the inside:) This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the inside sweater into place and glue the bear face on to the bear base. Glue the Sweater trim pieces to their solid bases.

5. Using foam adhesive squares, attach the bear’s muzzle to the bear face- lining up the smile. Attach foam adhesive squares to the backs of the sweater trim pieces, the hat trim, and the puff ball.

6.Glue the Hat Base piece to the back of the Card Base and the glue the bear’s face into place.

7. Attach the neck sweater trim piece, hat trim, and glue the christmas tree design into place.

8.Glue the paws onto the front side of the arms and then attach the sweater wrist trim pieces.

9. Insert gift card

10. I finished with adhesive dots for the bear’s eyes and a ribbon.

11. The Mittens tuck into the slots on the card base to close the card:)

Moose Hug Gift Card Holder

Moose Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 8”

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( There is an optional rectangular piece in case you wish to use card stock instead of ribbon for the scarf)

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the moose face piece to the head/antler base.

5. Using foam adhesive squares, attach the moose nose to the face base.

6. Glue the combined face/antler piece to the card base- (line up the circular sections-Image shows the back view)

7. This is a image of the front view.

8. I hot glued 1 1/2 " width ribbon for the moose’s scarf. There is a rectangular cut piece included in this file if you prefer to use card stock:)

9. Glue on the hooves and place them into the cut slots in the card base to close.

10. I finished with adhesive dots for the eyes, a bow, and a sparkle gem on the bow:)