Bunny Peek Pocket Card

Bunny Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
3. Apply glue to the backside of the fringed grass. 
4. Attach to the solid rectangular shape.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the rabbit shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes, nose, and insides of the ears to the coordinating shapes of the rabbit shape on the front of the combined card base.
8. Using foam adhesive squares, attach the double circle muzzle shape to the coordinating shape on the combined rabbit :)

Motorcycle Light Up Card

Motorcycle Light Up Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file uses an LED light, copper tape, and a battery to produce the lighting of the motorcycle headlamp. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 Coming Soon:)

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

Supplies for this project:

Chibitronics white lights

Chibitronics copper tape

CR2025 Battery

Electronic cutting machine

Printer

Tombow mono liquid glue

Double sided card stock (multiple colors)

vellum paper

Foam adhesive squares

scissors

Loctite Super glue

Silhouette pick me up tool

Youtube Instructional Video Tutorial Link Below:

Ps- There are 3 vellum circles to this file. This video begins with only displaying two.

Need help with the print and cut feature?

 Short tutorial below:)

           

Robot Double Sticky Note Holder

Robot Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock. ( I substituted colors on the small antenna circle from grey to silver. Grey is shown in this tutorial and silver on the finished product image)

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Top view.

4.- 5. This is what the backside will look like:) Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side. Glue the silver head piece with cutouts to the coordinating solid head shape. Glue the two smaller square foot pieces to their coordinating larger square foot pieces; centering them. Glue the two hand pieces to the coordinating shapes on the robot base; centering them.

6. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using pieces of foam adhesive squares, attach the combined feet, the combined head, and the small antenna circle to the coordinating shapes on the robot base. Using a foam adhesive square, attach the heart to the center of the combined robot.

7. Attach the combined robot to the front of the sticky note holder with foam adhesive squares; centering it. 

8. Insert the back of a sticky note stack inside the slot provided. Insert the second sticky note stack into the backside pocket.

9. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Labrador Double Sticky Note Holder

Labrador Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown ( pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Flip the base over as shown. Fold the side tabs as shown.

Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

4. This is what the backside will look like:)

5. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

6. Insert the second sticky note stack into the backside pocket.

7. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Using foam adhesive squares, attach the lab head piece with eye holes to the solid dog base.

8. Curve the small dog tongue as you like. Using foam adhesive squares, attach the black nose to the muzzle piece and the ears to the coordinating shapes on the combined dog. Glue the tongue by sliding it underneath the open section of the combined dog. 

9.Use a piece of foam adhesive square to attach the nose to the combined muzzle. I glued the top tips of the ears down to the combined dog base and used adhesive jewels to accent the eyes.

10. Insert a pen and finish with a ribbon:)

Schnauzer Double Sticky Note Holder

Schnauzer Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown (pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Fold the bottom score line back. Fold the side tab score lines toward the back.

4. I flipped the base over on this image so that you can see the folds on the bottom section. Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

5. This is what the backside will look like:)

6. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

7. Insert the second sticky note stack into the backside pocket.

8. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Glue the red collar piece to the solid dog base.

9. Glue the small round dog tag to the combined dog base at it’s coordinating spot;centering it. Glue the dog face with eye cutouts to the combined dog base;centering it.

10. Curve the small dog tongue as you like. Using foam adhesive squares, attach the small white muzzle to the larger gray muzzle;centering it. Glue the tongue under the white muzzle by sliding it underneath. Use a piece of foam adhesive square to attach the nose to the combined muzzle.

11. Use pieces of foam adhesive squares to attach the combined muzzle to the combined dog base and the ears to their coordinating shapes on the combined dog base. Glue the eyebrow to the combined dog; aligning the edges with the coordinating shapes on the combined dog base. 

12. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)

Cupid Basket

Cupid Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 5” including handle - W. 8.5 including arrow

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock) 

2. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid white face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the larger diaper to the coordinating shape on the box base.

3. Fold the arrow feather pieces (2) at the score lines. Apply glue to one side of one feather and attach one side of the other feather to it. Attach to the coordinating shape on the brown arrow base.

4. Fold the box base at the score lines. Glue the combined skin colored faces to the combined black/white face. Glue the red heart to it’s coordinating shape on the arrow base.

5. Glue the hair, eyebrows, and eyeballs to the combined face.

6. Apply glue to the top two tabs on the box base and secure to the shape above. Curve the eyelashes and glue into place ( optional )

7. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box.

8. Glue the smaller diaper piece to the back outside of the box base; aligning at the top center.

9. Use a foam adhesive square to attach the combined feet to the back of the box base.

10. Insert the handle into the side slots on the box.  Repeat for the other side. 

11. Glue the center of the combined arrow to the front of the basket as shown. Use a foam adhesive square to attach the face to the front of the box base.

12. Use a foam adhesive square to attach the combined hands to the front of the box base. Finish with a ribbon:)

Valentines Bus Card

Valentines Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock.

2. Glue the smaller bus to the larger one. Fold the card base.

3. Glue the floral bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the three hearts; smallest on top:)

4. Glue the four solid circles ( two red and two white) to the inside of the open circles; centering them.

5. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the combined hearts to the center of the combined bus.

6. Use pieces of foam adhesive squares to attach the bottom silver bumper piece and side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. 

7. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it:)