Schnauzer Double Sticky Note Holder

Schnauzer Double Sticky Note Holder-JMR

Approximate size: W 4” X H 3.5” X D 1”

This Sticky Note holder features a pen holder on the side and holds two standard sized stack of sticky notes; one on the inside and the other in the pocket in the back of the design. This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Flip the base over as shown (pretty side down). Fold at the score lines at the pen holder section. Top and bottom sections fold in and the center section folds out.

3. Fold the bottom score line back. Fold the side tab score lines toward the back.

4. I flipped the base over on this image so that you can see the folds on the bottom section. Apply glue to the small tabs on either side and glue downward; creating a pocket. Hold until dry on each side.

5. This is what the backside will look like:)

6. Turning the base over- Insert the back of a sticky note stack inside the slot provided.

7. Insert the second sticky note stack into the backside pocket.

8. Center the square panel on the front of the base. You may need to turn this piece to make sure it has proper spacing all edges. Glue the red collar piece to the solid dog base.

9. Glue the small round dog tag to the combined dog base at it’s coordinating spot;centering it. Glue the dog face with eye cutouts to the combined dog base;centering it.

10. Curve the small dog tongue as you like. Using foam adhesive squares, attach the small white muzzle to the larger gray muzzle;centering it. Glue the tongue under the white muzzle by sliding it underneath. Use a piece of foam adhesive square to attach the nose to the combined muzzle.

11. Use pieces of foam adhesive squares to attach the combined muzzle to the combined dog base and the ears to their coordinating shapes on the combined dog base. Glue the eyebrow to the combined dog; aligning the edges with the coordinating shapes on the combined dog base. 

12. I used adhesive jewels to accent the eyes. Insert a pen and finish with a ribbon:)