Tulip Tea Light (Flameless)

Tulip Tea Light (Flameless)-JMRush

Approximate Dimensions: W 3.5” x D 3.5” X H 2.75”

This design is compatible with both 8X12 and 12X12 mats and when vellum paper is used, an opaque lantern effect is created. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (I used double sided card stock and vellum paper)
2. Match up the petal outline shapes with the coordinating vellum shape. Glue the coordinating vellum piece to the backside of the outline flower. ( You can also cut out another outline flower piece if you would like each side of the vellum flower to have the outline detail (not shown:)
3. Fold the tabs of the tea light base ( long narrow strip with tabs). Tuck the end tab into the slot creating a circular tube shape. Apply a small dab of glue on the tab to hold in place.
4. Apply a small dab of glue on the tab to hold in place.    
5. Place the two narrow circular ring pieces over the tube shape you just created. One toward the top and one toward the bottom.
6. Apply glue to the outside of one of the rows of tabs and secure to the narrow ring. Repeat for the other set of tabs and circular ring.
7. Apply glue to the tops of the ring and tabs. Secure the thicker circular ring to the top.
8. Image of this step completed.
9. Flip the combined tube over. Place a flameless votive candle inside the tube. Apply glue to the tops of the ring and tabs. Secure the thicker circular ring to the top.
10. Curve the combined flower and leaves as you like. I used a think marker to curve the flower petals inward. I curved the tops of the petals outward with a thin wood dowel ( shown in final product image).
11. Apply glue to the backside of the leaves at the points where they make contact with the tea light base and attach to the tea light base.
12. Apply glue to the bottom of the flower and secure to the tea light base:)

Rabbit Candy Pocket

Rabbit Candy Pocket- JMRush 

Approximate size: W 5” X H 7.5

Approximate Pocket size: W 3” X H 4”

The Rabbit Candy Pocket has a open center section that is perfect for holding snack sized candies for classroom parties, birthday party treats, or for Easter. This file can also hold a standard sized gift card and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock)

2. Glue the rabbit head with cut outs to it’s matching solid base. Fold the tabs on the Rabbit pocket piece. Apply glue to the tabs. 

3. Fold forward and secure to the upper shape of the pocket.  Glue the inner ear pieces to the coordinating shape on the combined rabbit head.

4. Use foam adhesive squares to attach the pocket piece to the rabbit base with legs; aligning at the bottom and matching up the curves of the shapes.

5. Apply glue to the top section of the combined rabbit body. Center and secure the top of the rabbit; aligning to the coordinating shape of the rabbit’s body.

6. Cut three sections of thread and glue their centers to the combined rabbit head’s nose.

7. Use a foam adhesive square to attach the nose to the combined rabbit’s head nose; covering the thread’s middle sections.

8. Attach the combined head to the combined rabbit base using foam adhesive squares and aligning the edges on each side. I finished with enamel dots to accentuate the eyes, a ribbon, and inserted a gift card and candy carrots in the pocket:)

Stacked Chick Glasses Card

Stacked Chick Glasses Card- JMRush 

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. I used double sided card stock.

2. Fold the card base. Glue the oval face with eye cut outs to it’s coordinating solid base. Glue the feet to the full chick silhouette.

3. Glue the whites of the eyes to the combined oval face piece. Use foam adhesive squares to attach the chick body silhouette to the full chick silhouette. Use a foam adhesive square to attach the center square shape to the center of the bow tie.

4. Glue the glasses to the combined oval face piece. Use a small piece of foam adhesive to attach the beak to the combined oval face piece. Curve the sides of the bow tie and glue to the combined chick body silhouette. ( You will want to place the oval face piece temporarily on the chick body silhouette for placement.)

5. Use foam adhesive squares to attach the combined oval head to the combined body piece. Secure the combined chick to the front of the card base using foam adhesive squares. I finished by placing small adhesive dots to the eyes to accentuate them:)

Bunny Hug Candy Pocket

Bunny Hug Candy Pocket- JMRush 

Approximate size: W 4.25” X H 7”

Approximate Pocket size: W 2.5” X H 3.25”

The Bunny Hug Candy Pocket has a open center section that is sized to hold a Ghirardelli chocolate square, snack size candies, or a special message. This file can be used for classroom parties or office treats, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Fold the tabs on the bunny card base. Apply glue to the tabs. Fold forward and secure to the bunny shape of the card base. 

3. Glue the Bunny head with cut outs to it’s matching solid base. Glue the slightly smaller oval feet to the larger oval feet.

4. Glue the feet with cut outs to their coordinating combined oval feet. Glue the inside of the ears to the coordinating shape on the combined head.

5. Attach the combined bunny head to the card base; using a foam adhesive squares.  

6. Tuck the bunny hands into the slots in the center. Attach foam adhesive squares to the bottom corners of the card base and secure the combined feet to each corner.

7.-8. Attach the heart with a foam adhesive square and place a foam adhesive square on the backside of the rounded tail piece and secure to the bunny’s backside. I finished with a ribbon, enamel dots to accentuate the eyes, and placed a Andes mint chocolate squares in the pocket:)

Stacked Bunny Card

Stacked Bunny Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Fold the card base. Glue the small white tail to the bunny with eye/nose cut outs and both ears. Glue the small carrots to their coordinating shapes on the grouped carrot solid base. Curve the leaves of both carrot stem pieces.

3. Glue the combined bunny to it’s coordinating solid base. Glue the muzzel piece to the coordinating shape on the bunny face piece; matching up the eye/nose holes.  Glue the two carrot stem pieces together at the bottom and allowing the leaves to be free. 

4. Attach the combined carrot piece to the combined carrot stem piece with a foam adhesive square.

5. Attach the combined bunny head to the bunny silhouette with one ear; using a foam adhesive squares and following the contour of the bunny silhouette.

6. Attach the combined bunny head/body piece to the combined bunny base using foam adhesive squares in the center and glue on the ear and feet.

7.-8. Glue the combined bunny and the combined carrots to the front of the card.  I finished with a ribbon and tucked an enamel dot into the eye recess of the bunny to accentuate the eye :)

Wisteria Gift Tag Card

Wisteria Gift Tag Card-JMRush

Approximate Card Size: H 4.75” x W 2.75”

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold the card at the score lines. Glue the large wisteria flower/leaf piece to the front of the gift tag.

3. Glue the stem/leaf piece to the coordination shape on the combined gift tag; centering it. Curve the single flower petals and single leaves.

4. Using foam adhesive squares, attach the largest flower shape to the coordinating shape on the combined gift tag. Glue the leaves into place.

5. Glue the two remaining large flower pieces together ( smaller of the two on top) Glue the center of the two upper curved single flower petals to the top of the last remaining flower section. 

6. Repeat for the two side petals; overlapping slightly.  Attach the combined large flower section to the front of the tag base using foam adhesive squares. 

7. I used foam adhesive squares to attach the final petal to the center of the top layer.

8. Use foam adhesive squares to attach the last combined flower layer to the top of the tag. Finish with a ribbon and a enamel dot:)

Coffered Easter Wreath Door Card

Coffered Easter Wreath Door Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.

2. Fold the card base at the score lines. Attach the door with larger openings to the door with smaller openings using pieces of foam adhesive squares. Glue the small circle knob to the larger one; centering it. Glue the door handle panel with a key hole to the solid door handle panel. Glue the small open circle shape to the inside of the smallest egg wreath piece.

3. Use foam adhesive squares to attach the combined open rectangle doors to the solid rectangle door.  Curve the egg wreaths and greenery wreaths. Glue the combined door knob to the large door knob circle base.

4. Use foam adhesive squares to attach the four small rectangles inside each of the openings in the openings of the combined door. Use a piece foam adhesive to attach the combined door knob to the combined door handle panel. Glue the center of the large egg wreath to the large greenery wreath. Glue the center of the the small egg wreath to the smaller greenery wreath. (I positioned the egg wreaths so that they would fit in-between the spokes of the greenery wreath and makes sure the leaves and eggs stay free from glue.)

5. Using pieces of foam adhesive squares, attach the two combined wreath sections together; alternating leaves. Glue the combined door knob/panel to the combined door.

6. Attach the combined wreath to the combined door with glue where it aligns with the center strip of the combined door. Attach the combined door to the front of the card with foam adhesive squares and finish with a ribbon:)