Hanging Tea Light Lantern

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com

Reindeer Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6347

Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6181

Gnome Hanging Tea Light Lantern

Scroll down for more construction instructions

Wreath Hanging Tea Light Lantern

Snowflake Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6694

Snowman Hanging Tea Light Lantern

Cricut grouping measurement: W 11.4111

Star David Tea Light Lantern
Cricut grouping measurement: W 9.8722

Nativity Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.5556

Pinecone Hanging Tea Light Lantern

Cricut grouping measurement: W 11.5514

Poinsettia Hanging Tea Light Lantern
Cricut grouping measurement: W 11.4111

Santa Belt Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6444

Star Hanging Tea Light Lantern
Cricut grouping measurement: W 11.3833

Christmas Tree Hanging Tea Light Lantern

Cricut grouping measurement: W 11.6639

Hanging Tea Light Lantern (Flameless)-JMRush

Lantern size: W 2.5 x D 2.5 x H 5”
Cricut grouping measurement: W 11.6181

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

 You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1.Cut design pieces. ( I used double sided card stock and vellum paper) This tutorial is being used for multiple design files. Yours may vary from tutorial images.

2. Fold all score lines. 

3. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

4. Glue the vellum paper to the window panels; centering around each of the cut out sections.

5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

6. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

7. This is what it should look like:)

8.-10. Repeat for the rest of the top tabs until fully enclosed.

11. Image of the last two tabs being secured.

12. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

13. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 

14. Repeat for the two top tabs creating a shallow box.

15. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

16.  Tuck the end tab into the slot creating a circular tube shape.

17. Secure until dry.

18. Place the narrow circular ring piece and square piece over the tube shape you just created.

19. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

20. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

21. This is what it should look like:)

22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

23. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. I finished this lantern with a ribbon:)

Bottom Image:)

Gnome Hanging Tea Light Lantern

1. Follow the above directions for the lantern base. (You will only have one set of the gnome decor in this file.) 

2. Using pieces of foam adhesive squares, attach the mustache to the top of the window; centering it ( make sure you chose the side that the circle hanger faces). Glue the belt buckle to the center of the lantern base. Curl the holly as you like.

3. Glue the nose to the mustache. Glue the red holly to the holly leaves.

4.  Using pieces of foam adhesive squares, attach the brim of the hat just above the nose/mustache.

5. Using enamel jewels, decorate the holly. I finished with a small pom pom glued to the top just under the circular hanger:)

Santa Belt file additions:)

Christmas Bus Card

Christmas Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

1.Cut design pieces. I used double sided card stock. (Please excuse the edited blobs on the tutorial images) 

2. Glue the smaller bus to the larger one. Glue the largest present box to the coordinating shape on the combined bus. Fold the card base.

3. Glue the red bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the two smaller presents.

4. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the four solid circles to the inside of the open circles. Glue the last solid circle to the center of the bus; centering it.

5. Glue the three shiny red ribbon pieces to the presents at the top of the bus; largest on in the middle. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. Use pieces of foam adhesive squares to attach the bottom silver bumper piece.

6. Curve the three wreath pieces as you like and place them on top of each other; smallest on top and alternating branches.

7. Glue the wreath pieces inner circles together keeping placement. Glue the combined wreath to the front of the combined bus; centering it over the center circle.

8. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it. Finish with a bow on the wreath:)

3D Star Wreath Card

3D Star Wreath Card- JMRush 

Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold card base. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.) Curve the wreath branches as you like.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue to the front of the card base. Use foam adhesive squares to attach the star to the star ornament base. 

4. Finish with a ribbon:)

Ice Skates Sled Ornament Gift Tag

Ice Skates Sled Ornament Gift Tag- JMRush 

Approximate size: W 2.75” X H 6”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used doubled sided card stock)

2.  Flip the ornament base over and glue the coordinating gift tag (white) to it. Glue the wood plank pieces to the coordinating shapes on the sled base. Glue the ice skates shoes and blades to the coordinating shapes on the ice skates solid bases. Curve the branches of the two wreath pieces.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue the thin small red piece to the center top of the combined sled.

4. Use a foam adhesive squares to attach the combined sled to the front of the ornament base; centering it. Use a foam adhesive squares to attach the combined wreaths to the front of the combined sled.

5. Using a large gauge thread or small width ribbon, tie two bows and cut a three inch piece. 

6.-7.Glue one thread bow to each ice skate and glue the ends of the 3” thread to the backside of each ice skate ( I used hot glue for this).

8. Loop the thread of the ice skates around the center branch of the combined wreath. Glue into place if you like.

9.-10.  Finish with a ribbon:)

Ice Skates Sled Card

Ice Skates Sled Card- JMRush 

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used doubled sided card stock)

2.  Fold the card base. Glue the wood plank pieces to the coordinating shapes on the sled base. Glue the ice skates shoes and blades to the coordinating shapes on the ice skates solid bases. Curve the branches of the two wreath pieces.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue the combined sled to the sled runners; align at the horizontal cross bars.

4. Use a foam adhesive squares to attach the combined sled to the front of the card; centering it. Using a large gauge thread or small width ribbon, tie two bows and cut a three inch piece. Glue the thin small red piece to the center top of the combined sled.

5. Use a foam adhesive squares to attach the combined wreaths to the front of the combined sled. Glue one thread bow to each ice skate and glue the ends of the 3” thread to the backside of each ice skate ( I used hot glue for this).

6. Loop the thread of the ice skates around the center branch of the combined wreath. Glue into place if you like.

7. Finish with a ribbon:)

3D Holiday Star Card

3D Holiday Star Card-JMRush

Card size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog:https://jmrushdesigns.blogspot.com/2017/07/3d-holiday-star-card.html

 You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock).

2. Fold the card at the score line. Curve the leaves bow wreath. I  curved one section down and the other up:) Crease the center line score line on the star; center crease will be up and stops at the center.

3. Apply glue to the circle and the stem ( not leaves) of one of the bow wreaths. Align the other bow wreath and secure. Crease the rest of the score lines of the star. (All of the score lines of the points of the star fold up.)

4. Image of the bow wreaths together and the star completely flooded.

5. Apply glue to the backside of the combined bow wreath and attach to the (center) front of the card base. Apply foam adhesive squares to the backside of the star on each of the points.

6. Flip the star back over and attach to the center of the circle section of the bow wreath.

7. Finish with a ribbon:)

Winter Barn Card

 Winter Barn Card-JMRush

Card size: W 5.5” X H 4.25”

This design has barn doors that open and is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock). ( Be careful releasing the barn pieces with cut outs from the mat:)

2. Fold the card at the score line. Glue the thinner barn door designs to their larger bases. Curve the wreaths as you like.

3.  Glue the two detailed barns with cut outs together centering them. Apply glue to the back center of each of the smaller wreaths and then secure to the larger wreaths; alternating the stem patterns.

4.  Glue the combined barn to the solid barn base. Fold the barn doors at the score lines.

5. Glue the combined combined barn door designs to their coordinating shapes on the combined barn base. There is a cut out line to align the upper hay door ( My pinky is pointing to it:)

6. Use pieces of foam adhesive squares to attach the roof to the combined barn.

7. Flip one of the combined wreaths over and glue the center rings of the two sets of wreaths together.

8. Use pieces of foam adhesive squares to attach the combined wreath to the combined barn.  I glued a ribbon to the wreath.

9. Apply glue to the backside of the barn (be careful not to apply glue to the barn doors).

10. Center and glue to the card base:)

Flower Wreath Birdhouse Card

Flower Wreath Birdhouse Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock and pink vellum for the center flower petals)

2. Fold the card base at the score lines. Flip the smallest birdhouse grouping over and attach pieces of foam adhesive squares. Glue the small circle to the larger circle.

3. Attach the smallest birdhouse grouping pieces to the larger birdhouse grouping ( with cutouts). The roof pieces align at the center top. Curve wreath leaves and flowers as you like.

4. Glue the combined birdhouse piece to the solid birdhouse shape. Use pieces of foam adhesive to attach the roof to the solid birdhouse shape and the combined circles to the front of the combined birdhouse. Use pieces of foam adhesive squares to attach the two wreath pieces together alternating the leaves. Glue the back center of each vellum flower (hole in the center) to the center of each solid flower shape alternating petals. (The petals should remain free).

5. I placed adhesive jewels in the center of each flower and attached each combined flower to the combined wreaths with pieces of foam adhesive squares. Use foam adhesive squares to attach the combined flowers to the combined wreath. 

6. Glue the combined birdhouse to the front of the card and use foam adhesive squares to attach the wreath to the birdhouse. Finish with a ribbon:)

Coffered Flower Wreath Door Card

Coffered Flower Wreath Door Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I changed the color of the card base from pink to white at the end of the tutorial…also, I originally forgot to cut the door handle pieces so, they are photoshopped in and look wonky..oops! I also cut a second grouping of flowers…couldn’t decide which color to go with; pink or white…ended up with the white with clear vellum for the inside flowers:)

2. Fold the card base at the score lines. Curve wreath leaves and flowers as you like.

3. Attach the door with larger openings to the solid rectangle shape using foam adhesive squares. 

4. Attach the door with smaller openings to the combined door using pieces of foam adhesive squares. 

5. Use foam adhesive squares to attach the four small rectangles inside each of the openings in the openings of the combined door.

6. Glue the back center of each vellum flower (hole in the center) to the center of each solid flower shape alternating petals. (The petals should remain free).

7. Glue the door handle panel with a key hole to the solid door handle panel. Glue the large silver circle knob to the larger black one; centering it. Use pieces of foam adhesive squares to attach the two wreaths together; alternating leaves.

8. Glue the smallest door knob circle to the combined door knob circles. Attach the combined circle door knobs with a piece of foam adhesive square to the door handle combined base. Glue the combined door knob/handle to the front of the combined door. Use pieces of foam adhesive square to attach the combined wreaths to the front of the combined door. I places adhesive jewels in the center of each flower and attached each combined flower to the combined wreaths with pieces of foam adhesive squares.

9. This is where I decided to go with a white card…. I must be indecisive today:)

10. Attach the combined door to the front of the card with foam adhesive squares:)

Coffered Easter Wreath Door Card

Coffered Easter Wreath Door Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.

2. Fold the card base at the score lines. Attach the door with larger openings to the door with smaller openings using pieces of foam adhesive squares. Glue the small circle knob to the larger one; centering it. Glue the door handle panel with a key hole to the solid door handle panel. Glue the small open circle shape to the inside of the smallest egg wreath piece.

3. Use foam adhesive squares to attach the combined open rectangle doors to the solid rectangle door.  Curve the egg wreaths and greenery wreaths. Glue the combined door knob to the large door knob circle base.

4. Use foam adhesive squares to attach the four small rectangles inside each of the openings in the openings of the combined door. Use a piece foam adhesive to attach the combined door knob to the combined door handle panel. Glue the center of the large egg wreath to the large greenery wreath. Glue the center of the the small egg wreath to the smaller greenery wreath. (I positioned the egg wreaths so that they would fit in-between the spokes of the greenery wreath and makes sure the leaves and eggs stay free from glue.)

5. Using pieces of foam adhesive squares, attach the two combined wreath sections together; alternating leaves. Glue the combined door knob/panel to the combined door.

6. Attach the combined wreath to the combined door with glue where it aligns with the center strip of the combined door. Attach the combined door to the front of the card with foam adhesive squares and finish with a ribbon:)

Coffered St. Patrick’s Day Wreath Door Card

Coffered St. Patrick’s Day Wreath Door Card- JMRush 

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut design pieces. ( I changed the color of the card base to green:) ( HINT: The wreath pieces are delicate and it works best to release the clovers from the mat and then the center rings:)

2. Fold the card base at the score lines. Attach the door with larger openings to the door with smaller openings using pieces of foam adhesive squares. Glue the small circle knob to the larger one; centering it. Glue the door handle panel with a key hole to the solid door handle panel.

3. Use foam adhesive squares to attach the combined open rectangle doors to the solid rectangle door. Use foam adhesive squares to attach the four small rectangles inside each of the openings in the openings of the combined door. Glue the combined door knob to the large door knob circle base.

4. Use a piece foam adhesive to attach the combined door knob to the combined door handle panel. Curve your wreath circles as you like. Glue the inside rings of the two large wreath pieces together and the two smaller wreaths together making sure that the leaves alternate and that the leaves stay free from glue.

5. Using pieces of foam adhesive squares, attach the two combined wreath sections together; alternating leaves. Attach the combined wreath to the combined door with glue where it aligns with the center strip of the combined door. 

6. Glue the combined door knob/panel to the combined door. Attach the combined door to the front of the card with foam adhesive squares and finish with a ribbon:)