Campfire Smores

This file comes with the design shown. The design can be sized to fit your needs and is compatible with the 8x12 and 12x12 mats. Perfect for creating cards, layouts, shirts, totes, wood signs, wall art, vinyl, and more!

 

Camping Sticker Sheet 1

 Camping Sticker Sheet 1-JMRush

These camping themed designs are sized for a 8.5 X 11 print and cut sheet.  They can be used on a sticker sheet or standard letter size card stock, as a collection or individually. Great for planners, cards, scrapbooking, or any of your crafting projects.

Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.

 

Mom Hawaiian Floral Card

Mom Hawaiian Floral Card-JMRush

Approximate Size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock and vellum paper for the circular window piece.
2. Flip the card base over and glue the vellum piece to the coordinating opening on the card. 
3. Glue the open circle piece over the vellum paper; centering it.
4. Flip the card base over. Glue the Mom design piece to the coordinating shape; centering the word Mom with the card base.
5. Glue the large floral base aligning with the coordinating shape on the card base.
6. Glue the green palm leaves in place.
7. Glue the medium floral base into place; aligning with the coordinating shapes on the combined card base.
8. Glue the smaller (2) hibiscus flowers and small leaves (2) to the coordinating shape on the combined base.

1. Glue the smaller pistil bases (2) to the smaller hibiscus flowers.
2. Glue the yellow pistils to the pistil bases.
3. Glue the last floral base to the coordinating shape on the card base.
4. Glue the last Hibiscus flower and larger leaves (2) to the coordinating shapes on the card base.
5. Glue the large pistil base in place.
6. Glue the yellow pistil to the coordinating shape.
7. your card should look like this:)

 

Vampire Gift Tag Ornament

Vampire Gift Tag Ornament-JMRush

Approximate Size: W 3.25” x H 4.5”

This simple to construct design would be perfect to label your goodies for Halloween parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the hair piece to the coordinating shape on the round head piece with eye mouth cut outs. Glue the hands to the coordinating shapes on the tag base. Glue the white collar sleeve piece in place on the combined tag base. Glue the tiny oval to the nose base; aligning at the top.

3. Glue the combined nose to the head piece. Glue the bow tie and buttons to the tag base.

4. Place the combined head over the tag base aligning at the top and sides of the coordinating shape. Using a pencil, mark where the eyes should be places.

5. Remove combined head and place enamel jewels on the pencil marks. (I added a ribbon over the bow tie and adhesive jewels over the buttons.)

6. Attach the combined head with adhesive foam squares.

7. This is what it should look like:)

8. Flip the design over and glue the white body shape into place so that you have a place to write (optional).

 

Black Cat Open Mouth Treat Box

Black Cat Open Mouth Treat Box-JMRush

Approximate Size: W 5” x D 1.25”x H 5.5”

Approximate Box size: W 2.5” x D 1 x H 4” 

This box opens by lifting the character’s head to to expose the opening to the treat box. This simple to construct design would be perfect to hold your goodies for Halloween or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the box and Mouth base at the score lines.

3. Glue the pink mouth piece (with holes) to the coordinating shape on the mouth base;aligning at the inner oval cut out shape.

4. Use pieces of foam adhesive squares to attach the teeth shapes to the coordinating shapes on the combined mouth base.

5.  Glue the two tiny oval white pieces to the coordinating shapes on the eyes. This is what it should look like:)

6. Flip the mouth base top over, like so. Glue the Cat head to the coordinating shape; aligning at the top of the ears.

7. I used an orange marker on the edges of the cat eyes. Glue the cat eyes into place.

8. Place the Cat nose on the cat face to find placement and then remove.

9. Cut thread ( approximately three strands of 4inches).

10. Attach the threads with glue to the area you picked to place the Cat nose. Allow to dry.

11. Using a foam adhesive square, place the Cat nose on top of the threads.

12. I used adhesive jewels to accent the eyes.

13. Apply glue to the small vertical side tab at the left side of the bottom of the box base.

14. Secure the small vertical side tab to the 1 inch (width) rectangles just above. 

15. Apply glue to the very left vertical tab, the horizontal tab, and the side tab on the bottom right and attach the side and bottom of the base…wrapping it crating a box.

16. This is what it should look like:)

17. Tuck the tab into the slot on the top.

18. Flip the box base over and apply glue to the area just outside the oval cut out.

 19. Attach the combined Cat head; centering it around the cut out oval shape and allow to dry.

20. I finished by adding a ribbon and filling with fun sized candies.

Mummy Candy Keeper

Mummy Candy Keeper-JMRush

Approximate size: W 6 x D .75 x H 4.5”

This design features a character head and hands that covers a shallow bin that is designed to fit regular sized candy bars up to 6 inches long or small treats. This design is compatible with both 8X12 and 12X12 mats.

Inside

Back

1.Cut design pieces. ( I used double sided card stock paper)

2. Fold the keeper base at the score lines. Glue the small hands to the larger design piece hands; centering and lining up at the wrists. Glue the mummy wrap face to the skull shape; centering.

3. Apply glue to the front tabs in the front of the keeper base and attach to the front rectangle shape as shown. Hold until secure.

4. Apply glue to the second back set of tabs and glue to the backside of the keeper forming a box.

5. Your keeper base should look like this:)

6. Flip the skull and hands down over the box. Apply glue to the backside of the combined mummy skull and combined hands and attach to the coordinating shape on the keeper base. 

 7. Apply glue to the backside of the eyes and attach to the coordinating shapes on the combined keeper base.

8. Flip the keeper base over. Apply glue to the script and attach to the backside of the keeper base.

9. I finished this design by adding candy and a ribbon:)