Hunter Santa Hug Gift Card Holder

Hunter Santa Hug Gift Card Holder-JMR

Approximate Card size: 4” x 5.25” 

This card features character arms that open to release a hidden gift card section. The Hunter has a hunting vest detail on the inside:) This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Fold the card along score lines. Glue the stocks of the gun onto the gun base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the Vest pieces into place. Glue the nose on the mustache piece.

5. Glue the oval Beard base into place; centering it with the card base and matching up with the top of the card base. Glue the pocket trim and button onto the pocket base. Glue the Hat and Gloves trim pieces onto their coordinating base pieces.

6.Glue the combined hat and combined pocket piece into place.

7. Glue the face piece into place. Using an adhesive foam square, attach the nose/mustache piece. 

8. Glue the eyes on to the face and black hat shadow piece to the combined hat.

9. Flip the card over. Glue the rectangle piece and combined mittens to the coordinating shapes on the backside.

10. This is what it should look like:)

11. Insert gift card. I used adhesive dots to accentuate the eyes. You can glue the gun into place or tuck it under the mitten.

12. Tuck the mittens into their slots. I used ribbon at the bottom to trim the card:).

Graveyard Fence Basket

 Graveyard Fence Basket-JMRush 

Approximate size: W 3.75 x D 3.25 x H 5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock) Your file will contain only one set of ghosts.

2. Fold all score lines. Using foam adhesive squares, attach the “rip” tombstones to their coordinating solid shapes; centering them. Using foam adhesive squares, attach the ghost with cut outs to it’s coordinating solid shape; centering it.

3. Apply glue to the outside of the fence posts that have score lines. Attach to the inside coordinating fence post on the sides; aligning at the edges. 

4. Repeat until all four corners are glued and you have a box shape.

5. Insert the handle to the slot on the sides of the basket base.

6. Use foam adhesive squares to attach the combined tombstones to the coordinating shapes on the basket base; centering each one. Use foam adhesive squares to attach the combined ghost to the inside of the front tombstone.

7. I finished with ribbon for the handle and for a bow tie:)

3D Hanging Bat

3D Hanging Bat-JMRush 

Approximate size: W 9.5 x D 1.5 x H 4”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold all score lines. Glue an open centered circle to the coordinating shape on the spider base on the front side and glue the other to the back.

3.-5. Apply glue to one side of the folded bat body piece. Attach one side of another bat body; aligning at the edges. Repeat. You will have combined four bat body pieces together.

6. This is what it will look like:)

7. Glue the combined body piece to the bat base at the coordinating shape; aligning the edges. Combine the other four bat body pieces as you did above. 

8. Glue to the backside of the bat base; aligning at the edges. This is what it should look like:)

9. Lace a string through the top hole. Tie the string. Cut the excess string and finish by curving the wings:)

3D Hanging Spider

3D Hanging Spider-JMRush 

Approximate size: W 5 x D 1.5 x H 8”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold all score lines. Glue an open centered circle to the coordinating shape on the spider base- on the front side and glue the other to the back.

3. Apply glue to one side of the folded spider pieces. Attach one side of another spider body; aligning at the edges.

4. Repeat. You will have combined three spider body pieces together.

5. This is what it should look like. Glue the combined body piece to the spider base at the coordinating shape; aligning the edges.

6. This is what it should look like.

7. Combine the other three spider pieces as you did above. Glue to the backside of the spider base; aligning at the edges.

8. This is what it should look like:)

9. Lace a string through the top hole.

10. Tie the string and curve the spider legs as you like.

11. Cut the excess string and finish by placing adhesive jewels for eyes:)

Spider Hanging Tea Light Lantern

Spider Hanging Tea Light Lantern-(Flameless) JMRush 

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog:https://jmrushdesigns.blogspot.com/2018/10/skull-hanging-tea-light-lantern.html

Additional tutorial images can be found here:

https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Skull Hanging Tea Light Lantern

Skull Hanging Tea Light Lantern-(Flameless) JMRush 

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. 

Additional tutorial images can be found here:

https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

Spider Hanging Tea Light Lantern-(Flameless) JMRush 

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats.

Spooky Hanging Tea Light Lantern (Flameless)-JMRush

Approximate Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless lantern features a Spooky Haunted House design which is wrapped around each of the four sides. A layered transparent frosted effect is created when vellum paper is used. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

Bat Tea Light Lantern (Flameless)-JMRush

Approximate Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats.

Additional tutorial images can be found here:

https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

           This tutorial is used for multiple designs. Your file may contain different design pieces.

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the Lantern base over. Fold all score lines. 

3. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern (on the backside) and secure to the other lantern window base piece (on top).

4. Additional image of lantern base pieces glued together.

5. Glue the vellum paper to the window panels; centering around each of the cut out sections.

6. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

7. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

8. Repeat for the rest of the top tabs until fully enclosed. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

 9. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides. 

10. Repeat for the two bottom tabs creating a shallow box.

11. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

12.  Tuck the end tab into the slot creating a circular tube shape.

13. Secure until dry.

14. Place the square piece over the tube shape you just created.

15. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

16. Place the narrow circular ring piece over the tube shape you just created. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

17. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

18. Using pieces of foam adhesive squares, attach the skulls to the coordinating shapes on the outside of the lantern base; centering them. (If using the spider lantern design: Curve the spider legs and I used a black marker to color the foam adhesive squares to hide them. I also attached an adhesive jewel on the spider's backside for a bit of sparkle:)

19.  Apply glue to the bottom outside edges of this piece and place inside the tea light base box. Secure until dry. I finished this lantern with a ribbon:)

Additional tutorial images can be found here:

https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

Pug Dog Basket

Pug Dog Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 3.75” including handle

This cute Pug Dog Basket is a perfect gift container for dog lovers or for dog treats. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock. (The dog basket base will be slightly different then what is shown at the beginning of this tutorial- adjustments were made:)
2. Flip the basket base head side down. Fold the basket base at the score lines. Glue the light colored round eye pieces (2) to the back of the black dog eyes/face piece with cutouts.  Glue the black paw prints to the back of the brown paw prints with cut outs; centering them. Glue the small black nose to the gray muzzle piece; aligning the nostril holes.
3. Apply glue to the top two tabs and secure to the rounded backside piece just above. Glue the solid brown paw print pieces to the back of the combined paw prints.
4. Apply glue to the bottom two tabs and secure to the dog silhouette piece just below; creating a box.
5. Use a foam adhesive square to attach the ears to the coordinating shapes on the solid large dog face shape. Glue the muzzle and chin piece to the combined black eye/face piece. Use foam adhesive squares to attach the combined dog face to the solid large dog face shape. Apply glue to the tops of the eyebrows and secure down to the first layer. Apply glue to the top tips of the ears and secure to the first layer: this is just to add dimension.
6. Use foam adhesive squares to attach the combined dog face to the front of the basket base; aligning at the top edges. Use a foam adhesive square to attach the front feet.
7. I placed a bow under the dog’s chin.
8. Turn the basket to the backside and attach the tail piece with a foam adhesive square; centering it. Use foam adhesive squares to attach the combined paws into place:)
9. Insert the handle piece into the slots on each side of the combined basket. 
10. Ta da:)