3D Hanging Bat

3D Hanging Bat-JMRush 

Approximate size: W 9.5 x D 1.5 x H 4”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold all score lines. Glue an open centered circle to the coordinating shape on the spider base on the front side and glue the other to the back.

3.-5. Apply glue to one side of the folded bat body piece. Attach one side of another bat body; aligning at the edges. Repeat. You will have combined four bat body pieces together.

6. This is what it will look like:)

7. Glue the combined body piece to the bat base at the coordinating shape; aligning the edges. Combine the other four bat body pieces as you did above. 

8. Glue to the backside of the bat base; aligning at the edges. This is what it should look like:)

9. Lace a string through the top hole. Tie the string. Cut the excess string and finish by curving the wings:)

3D Hanging Spider

3D Hanging Spider-JMRush 

Approximate size: W 5 x D 1.5 x H 8”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold all score lines. Glue an open centered circle to the coordinating shape on the spider base- on the front side and glue the other to the back.

3. Apply glue to one side of the folded spider pieces. Attach one side of another spider body; aligning at the edges.

4. Repeat. You will have combined three spider body pieces together.

5. This is what it should look like. Glue the combined body piece to the spider base at the coordinating shape; aligning the edges.

6. This is what it should look like.

7. Combine the other three spider pieces as you did above. Glue to the backside of the spider base; aligning at the edges.

8. This is what it should look like:)

9. Lace a string through the top hole.

10. Tie the string and curve the spider legs as you like.

11. Cut the excess string and finish by placing adhesive jewels for eyes:)

Spider Hanging Tea Light Lantern

Spider Hanging Tea Light Lantern-(Flameless) JMRush 

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog:https://jmrushdesigns.blogspot.com/2018/10/skull-hanging-tea-light-lantern.html

Additional tutorial images can be found here:

https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Dahlia Flower Tea Light

Dahlia Flower Tea Light (Flameless)-JMRush

Approximate Dimensions: W 4” x D 4” X H 2”

This design is compatible with both 8X12 and 12X12 mats and is used with a flameless battery operated tea light candle. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1. Cut design pieces. (I used double sided card stock paper) I used a darker red color card stock for the 4 largest petal layers.
2. Curve the flower petals. Fold the tabs on the flower base.
3. Tuck the end tab into the slot creating a circular tube shape. Secure with a small dab of glue. Glue the 6 flower petal sections together; Largest on bottom to smallest on top and alternating petals. I did this by applying glue to the backside around the circumference of each flower layer.
5. Place the narrow circular ring pieces over the tube shape you just created.
6. Apply glue to the outside of one of the rows of tabs and secure to the narrow ring.
7. Apply glue to the tops of the ring and tabs.
8. Secure the thicker circular ring to the top.

9. Place a flameless votive candle inside the tube. Apply glue to the outside of the tabs and secure to the narrow ring.(repeating the steps above)

10. Apply glue to the tops of the ring and tabs. Secure the thicker circular ring to the top.

11. Fold the tabs of one of the two large flower petal piece down. Fold the other large flower’s tabs up.

12. Apply glue to the outside of the tabs on the downward tabs and combine with the other large center combined flower petal securing each of the tabs together.

13. Apply glue to the bottom center of the combined large flower piece and attach to the lantern base piece.

14. Apply glue to the center backside of the combined flower petal grouping and attach to the center of the combined lantern, alternating the petals. Apply light pressure until dry:)

Live, Laugh, Love Lantern (Flameless)

Live, Laugh, Love Lantern (Flameless)-JMRush

Lantern size: W 3 x D 3 x H 7”

This flameless candle lantern features three panels that read Live, Laugh, and Love and when vellum paper is used, a layered frosted effect is created. The file also includes a heart shaped lock and key design that can be used independently. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Flip the two lantern base pieces over. Center the vellum rectangles over the openings in the lantern base. Apply glue and secure into place.

3.-4. Glue the circular hangers together. ( Make sure the stems of this piece remain separate) Glue one of the stems to the top of the third from the left window panel. (The other stem will be glued inside the lantern later)

5. Fold all score lines. 

6.Apply glue to the long side tab of the lantern window base and secure to the other lantern window base piece.

7.-8. This is what it should look like:)Apply glue to the other long side tab and attach to the other side creating a box.

9. -14. Applying glue to one top tab at a time, begin to secure the top tabs to the inside of the next angled triangle.  The other Circular hanger stem will be glued to the inside of the opposite side of the lantern. Glue and secure all top tabs.

15. Center and glue the lettering to the coordinating shapes on the lantern base.

16.-18 Fold the score lines on the lantern base. Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides. Repeat for the bottom tabs creating a shallow box.

19. Using a foam adhesive square, attach the heart with the cut out to the heart base.

20. Place the lantern top in it’s base. Finish with a ribbon and place a flameless candle inside. I used enamel adhesive dots to decorate the top of the key and lock and looped ribbon so that these decorative pieces hang from the center circular hanger:)