Hummingbird Lantern (Flameless)

Hummingbird Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7.5” (H 8” with Circle Hanger)

This Flameless lantern features a hummingbird design which is wrapped around each of the four sides. A layered transparent frosted effect is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the two lantern pieces over ( pretty side down) and apply glue around the inner edge of the opening and attach the vellum rectangles. ( Helpful hint:You may need to place a heavy object (book) on top of the vellum to keep it from getting wavy while drying).

3. Apply glue to the circle hanger hanger and attach to the top of the second and fourth peak on the lantern base as shown. ( Makes sure that both are placed symmetrically in height).

4. Flipping the combined lantern bases over, apply glue to the backside of the green hummingbird panels and align over each silhouette window on the combined lantern base.

5. Apply glue to the backside of the side view flower and attach to the coordinating shape on the combined lantern base.

6. Using foam adhesive squares, attach the hummingbird silhouettes to the hummingbird window panels; aligning with each coordinating shape.

7. Apply glue to the backside of the combined hummingbird window panels and attach to the coordinating shapes on the combined lantern base.

8. Apply glue to the long side tab on the right hand side of the second combined lantern base.

9. Attach the first combined lantern base on top of the second combined lantern base’s tab and secure (joining the two base pieces). Make sure the panels are aligned at the bottom. Glue the last purple flower piece to each coordinating shape on each panel.

10. Fold the lantern base at the score lines. Apply glue to the first combined lantern base’s long side tab on the very left side. Secure the long side tab to the other side creating a box. 

11. It should look like this:)

12. Image of the side edge secured.

13. Apply glue to the top tab with the circle hanger and secure it to the triangular panel to it’s left side.

14.-18. Repeat for the next tab. Continue applying glue to the top tabs until the top is complete. Apply glue to the other side of the circle hanger piece and secure to the opposite side inside the lantern.

19. I use a long object (pencil) to help secure the tabs from the inside of the lantern top.

20. Curve the flower petals and leaves as you like.

21. Using foam adhesive squares, attach the purple flower to the black flower base; alternating the petals.

22. Repeat for the silver flower to the combined flower. Glue the inside tiny green flower shape to the inside of the combined flower.

23. Glue the leaves on the back of the combined flower.

24. Using a foam adhesive square, attach the combined flower to the lantern on the side which has the circle hanger facing you.

25. Fold the score lines on the lantern square base.

26. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.

27. Repeat for the bottom two tabs creating a shallow box.

28. It should look like this:)

29.-30. Place a flameless candle inside and the lantern top in it’s base.( I used a W 2.75” x H 4” pillar flameless candle).

Hip Hip Hooray!Card- JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats and contains a gift card/money pocket.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock any glitter card stock)

2. Flip the card base over as shown. Glue the white square to the center panel and secure until dry.

3. Apply glue to the top panel around the words. Secure the glitter square pretty side down and secure until dry.

4. Fold score lines. Fold side tabs in toward the center. Apply glue to the side tabs on either side of the bottom panel. Fold the bottom panel toward toward the center panel and secure until dry. This will create a pocket.

5. Insert gift card or money.

6. Your card is complete:)

 

Bunny Boy Girl 3D Stand Up

Bunny Boy Girl 3D Stand Up- JMRush 

Approximate size: W 3.25” X H 5.75” X 2.75”D

This cute Bunny decoration stands independently. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock. This tutorial shows both the boy and girl bunny)

2. Glue the bunny with cutouts to the bunny base with whiskers.

3. Flip the combined bunny over and glue the solid bunny to the combined bunny. Glue the orange carrot to the carrot base.

4. Glue one of the jumpers to the combined bunny base.

5. Flip the combined bunny over ( right side up). Fold the six bunny tummies at the score lines.

6. Apply glue to one side of one of the tummy pieces and attach another tummy piece aligning the edges.

7. It should look like this.

8. Continue glueing tummy pieces until you have three in each group. Two groups.

9. It should look like this.

10. Find the two tummy pieces that are single layer and apply glue to the backside.

11. Attach the combined tummy piece to the combined bunny base aligning at the bottom. Using foam adhesive squares, attach the combined carrot and the bowtie (hair bow for the girl)

12. Flip the combined bunny over and glue the last combined tummy to the backside.

13. The Girl bunny’s collar is attached by pieces of foam adhesive square and the tiny blue dot is glued to the center of the collar.

14. Bunnies:)

Santa Handle Basket

Santa Handle Basket-JMR

Approximate size: W 4.5” x D 3” x H 5.5” (including handle)

Approximate box size: W 2.75” x D 2.25” x H 2.25”

This cute Santa Basket is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Glue the white santa head to the coordinating beige santa head. Glue the beige hands to the coordinating white hands with ruffles.

3. Glue the combined santa head to the coordinating shape on the basket base. Glue the large hat piece to the coordinating shape on the combined basket base.

4. Using foam adhesive squares, attach the ruffle hat brim to the small hat piece and the black shoe heels to the shoe bases.

5. Glue the tiny black eye circles to the coordinating holes on the combined base. Attach the combined small hat piece to the combined base using foam adhesive squares.

6. Attach the eyebrows using pieces of foam adhesive squares. Attach the puff ball to the hat and  the nose to the mustache using foam adhesive squares.

7. I used adhesive jewels to accentuate the eyes.

8. Flip the base over as shown.

9. Apply glue to the two top tabs on the basket base and attach to the rounded section of the basket.

10. Repeat for the lower two tabs; creating a box.

11. This is what it should look like:)

12. Attach the combined hands to the front using foam adhesive squares.

13. Attach the combined shoes to the back using foam adhesive squares. Glue the belt buckle to the center of the handle.

14. Insert the handle to the slot on either side of the basket.

15. I added a ribbon to the handle:)

 

Hanging Tea Light Lantern

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com

Reindeer Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6347

Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6181

Gnome Hanging Tea Light Lantern

Scroll down for more construction instructions

Wreath Hanging Tea Light Lantern

Snowflake Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6694

Snowman Hanging Tea Light Lantern

Cricut grouping measurement: W 11.4111

Star David Tea Light Lantern
Cricut grouping measurement: W 9.8722

Nativity Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.5556

Pinecone Hanging Tea Light Lantern

Cricut grouping measurement: W 11.5514

Poinsettia Hanging Tea Light Lantern
Cricut grouping measurement: W 11.4111

Santa Belt Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6444

Star Hanging Tea Light Lantern
Cricut grouping measurement: W 11.3833

Christmas Tree Hanging Tea Light Lantern

Cricut grouping measurement: W 11.6639

Hanging Tea Light Lantern (Flameless)-JMRush

Lantern size: W 2.5 x D 2.5 x H 5”
Cricut grouping measurement: W 11.6181

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

 You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1.Cut design pieces. ( I used double sided card stock and vellum paper) This tutorial is being used for multiple design files. Yours may vary from tutorial images.

2. Fold all score lines. 

3. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

4. Glue the vellum paper to the window panels; centering around each of the cut out sections.

5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

6. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

7. This is what it should look like:)

8.-10. Repeat for the rest of the top tabs until fully enclosed.

11. Image of the last two tabs being secured.

12. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

13. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 

14. Repeat for the two top tabs creating a shallow box.

15. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

16.  Tuck the end tab into the slot creating a circular tube shape.

17. Secure until dry.

18. Place the narrow circular ring piece and square piece over the tube shape you just created.

19. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

20. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

21. This is what it should look like:)

22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

23. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. I finished this lantern with a ribbon:)

Bottom Image:)

Gnome Hanging Tea Light Lantern

1. Follow the above directions for the lantern base. (You will only have one set of the gnome decor in this file.) 

2. Using pieces of foam adhesive squares, attach the mustache to the top of the window; centering it ( make sure you chose the side that the circle hanger faces). Glue the belt buckle to the center of the lantern base. Curl the holly as you like.

3. Glue the nose to the mustache. Glue the red holly to the holly leaves.

4.  Using pieces of foam adhesive squares, attach the brim of the hat just above the nose/mustache.

5. Using enamel jewels, decorate the holly. I finished with a small pom pom glued to the top just under the circular hanger:)

Santa Belt file additions:)

Penguin Sweater Hug Gift Card Holder

Penguin Sweater Hug Gift Card Holder

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock) ( There are two additional earmuff pieces included in this file that are not shown in this tutorial until the end.)

2. Glue one of the sweater chest pieces to the coordinating shape on the base. Glue the sweater sleeves on either side on the coordinating shapes.

3. Glue the penguin face (with cut outs) and the ear muff base to the coordinating shapes on the base.

4. Using foam adhesive squares, attach the beak and the sweater collar to the combined base.

5. Using foam adhesive squares, attach the earmuffs to the coordinating shapes on the combined base.

6. Fold the card along score lines.

7. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

8. Insert gift card.

9. Fold the gift card section up. Glue (only the edges) the rectangle to the coordinating bottom section making sure that the score lines align and that the score lines are not glued down.

10. Flip the card over. Glue the other sweater chest piece to the coordinating shape and glue the remaining sleeve pieces to the each side.

11. Using foam adhesive squares, attach the remaining ear muff pieces and the remaining collar piece.

12. Flip the combined card base over and Tuck the hands into the slots.

13. I finished with enamel jewels to accentuate the eyes and a ribbon:)